Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Design and Realization of a Dual Function OCM/MPM for Imaging TEMPs

    SBC: Distant Focus Corporation            Topic: N/A

    Regenerative medicine is an emerging, interdisciplinary field that will result in new engineered medical products. The introduction of a high-resolution, non-destructive imaging technique that is capable of penetrating deeply into the highly-scattering scaffold medium has the means to accelerate the development and commercial utilization of these novel materials. Multi-photon microscopy (MPM) is b ...

    SBIR Phase II 2006 Department of CommerceNational Institute of Standards and Technology
  2. Chemical and Biological Agent Deny: Selective Phosphate Ester Hydrolysis

    SBC: Icagen, Inc.            Topic: DTRA06012

    This proposed work will generate a targeted phosphate ester hydrolysis catalyst for agent denial. This catalyst will be targeted by conjugation to single stranded DNA. Characteristics of the catalyst will be determined, including ruggedness, targeting selectivity, and potential methods for deployment.

    SBIR Phase I 2006 Department of DefenseDefense Threat Reduction Agency
  3. CAD Model and CR and MRI Scan Data to MCNP Input Format Conversion Software

    SBC: White Rock Science            Topic: N/A

    We will develop two programs to process data describing a model geometry and convert it to input acceptable to the Monte Carlo transport codes MCNP and MCNPX. One program will read CAD files in the ACIS solid body SAT format. Solid bodies, surfaces, and cells described in the SAT file will be converted to equivalent MCNP objects where available. Where there is no MCNP equivalent, such as for splin ...

    SBIR Phase I 2003 Department of CommerceNational Institute of Standards and Technology
  4. Emerging Weapons Technology Evaluation Model

    SBC: APPLIED SCIENCES LABORATORY, INC.            Topic: N/A

    Accelerated development of directed energy technologies has presented new problems to mission planners and weapon operators regarding the capabilities, lethality and performance of weapon systems. The Emerging Weapons Technology Evaluation Model willaddress these shortcomings by providing users of varying technical expertise 1) the ability to model a variety of weapons in various mission scenario ...

    SBIR Phase I 2003 Department of DefenseSpecial Operations Command
  5. Composite Stuff-Proof Windshield and Lightweight Pilothouse Assembly

    SBC: PACKER TECHNOLOGIES INTERNATIONAL (FORME            Topic: N/A

    The Phase II effort builds on Phase I. Phase II starts with an integrated product and process design and engineering analysis of the baseline structure described in the Phase I report and variants that may reduce cost and risk. The emphasis is on use ofnonlinear FEA with continuum analysis to handle stiffeners, window frames, and connectors. After review and approval by SOCOM, the design is fab ...

    SBIR Phase II 2003 Department of DefenseSpecial Operations Command
  6. Composite, Stuff-Proof Windshield and Lightweight Pilothouse Assembly

    SBC: PACKER TECHNOLOGIES INTERNATIONAL (FORME            Topic: N/A

    In this Phase I SBIR Program, K+P Agile will develop a high strength, lightweight, modular, composite windshield structure for the MK V Special Operations Craft (SOC) that will not fail when the craft passes through a wave (or

    SBIR Phase I 2001 Department of DefenseSpecial Operations Command
  7. Capillary discharge source for high fidelity, plasma radiation source loads

    SBC: KTECH CORP.            Topic: N/A

    Science based assessments of the response of systems and material to hostile nuclear environments require detailed verified material response and failure criteria for confident results. Consequently there is a need for the development of experimentaltechniques to measure low pressure equation of state parameters accurately and economically using radiation simulators. The development of a soft x- ...

    SBIR Phase I 2001 Department of DefenseDefense Threat Reduction Agency
  8. Large Area Survivable Shield Design

    SBC: KTECH CORP.            Topic: N/A

    The measurement of the variation of fluence from a Plasma Radiating Source (PRS) with polar angle is critical to the definition of the stimuli acting on an effects experiment using PRS diagnostics because in general experiments and diagnostics view thesource from different angles. The polar angle fluence distribution is controlled by the opacity of the pinch, which is a sensitive function of pinc ...

    SBIR Phase I 2001 Department of DefenseDefense Threat Reduction Agency
  9. Development of a Soft X-Ray Driven Flyer Plate System for Low Pressure Equation of State Studies

    SBC: KTECH CORP.            Topic: N/A

    Present reflex triode (RT) design performance is limited by debris shield response. The shield designs were derived empirically to satisfy specific experiment requirements. Optimizing the RT design will double target dose. Debris shield deformation definesthe closest permissible location of the test object and therefore determines the maximum dose achievable. The deformation of the debris shield c ...

    SBIR Phase I 2001 Department of DefenseDefense Threat Reduction Agency
  10. Reflex Triode Design Optimization

    SBC: KTECH CORP.            Topic: N/A

    Survivable shields are a necessary part of many soft x-ray debris mitigation systems that provide ultra clean test environments for nuclear weapons effects testing. Existing test requirements demand ultra large area survivable shields (12 inch diameter).Existing designs are limited to relatively small areas at low fluences and/or impose severe x-ray attenuation penalties. A methodology for the d ...

    SBIR Phase I 2001 Department of DefenseDefense Threat Reduction Agency
US Flag An Official Website of the United States Government