You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Covert Modular Situational Awareness Monitor

    SBC: ADA TECHNOLOGIES, INC.            Topic: SOCOM05010

    A need exists for inexpensive, disposable, broadcast capable chemical / explosive-compound sensors that also provide site weather conditions. The state-of-the-art does not meet the need described both in terms of CWA sensor cost/size and lack of a low-cost deployment system. ADA proposes under this three-phased SBIR program to develop a system comprised of a suite of covert, modular, lightweight ...

    SBIR Phase I 2006 Department of DefenseSpecial Operations Command
  2. Vinyl Ester Compatible High-Modulus Fiber System for Composite Laminates

    SBC: Adherent Technologies, Inc.            Topic: N04094

    An aqueous-based finish (sizing) was developed in Phase I to improve the carbon/vinyl ester interfacial bond. The finish is composed of a reactive coupling agent, a low viscosity vinyl ester resin, a free radical inhibitor, and a surfactant. The reactive finishes substantially improved the carbon/vinyl ester interface compared to unsized or FOE sized materials. Failure mode analysis shows that ...

    SBIR Phase II 2006 Department of DefenseNavy
  3. High Temperature Finishes/Sizings for Polyimide Matrix Composites

    SBC: Adherent Technologies, Inc.            Topic: N04251

    New high-temperature sizings are needed to improve the properties and durability of carbon/polyimide composites. Compatibility with weaving and braiding operations and improved wetting during prepregging or resin infusing polyimide resin is also needed. Achieving these characteristics will result in reducing life cycle costs for jet engine composites through better property translation, reduced ...

    SBIR Phase II 2006 Department of DefenseNavy
  4. Finishing Process to Improve Interfacial Bonding in SiC/BMI Composites

    SBC: Adherent Technologies, Inc.            Topic: N05025

    High-temperature (HT) polymer matrix composites (PMCs) are desired for many aerospace and military applications. Silicon carbide (SiC) fibers provide a potentially attractive reinforcement for HT PMCs for applications ranging from propulsion systems to structures for the orbiting space plane. The sizings routinely added to commercial SiC fibers are not compatible with the new HT matrix resins. ...

    SBIR Phase II 2006 Department of DefenseNavy
  5. Phosphorous-Containing Epoxy Resins for Room Temperature VARTM

    SBC: Adherent Technologies, Inc.            Topic: N06T017

    The Navy intends to start using a significant quantity of composite structures in surface ship construction in an effort to decrease costs as well as to reduce the visibility of the ships to radar. The large size of the target structures necessitates the use of low temperature, non-autoclave processing techniques such as Vacuum Assisted Resin Transfer Molding (VARTM). In the recent past, most m ...

    STTR Phase I 2006 Department of DefenseNavy
  6. Vertical Linear Accelerator for Dynamic Visual-Vestibular Acuity Health Status Evaluation and Desensitization Training

    SBC: ANCO ENGINEERS, INC.            Topic: OSD05H13

    Military platforms expose personnel to extreme vertical vibrations. These vibrations can induce visual-vestibular disturbance or even permanent injury, resulting in spatial-disorientation-related mishaps or decreased performance due to motion-sickness. ANCO Engineers, Inc. proposes to investigate the feasibility of a human-rated, computer-controlled, innovative Vertical Linear Accelerator (VLA) ...

    SBIR Phase I 2006 Department of DefenseNavy
  7. High-Temperature Amorphous Coating for CMCs for Protection against Hot Corrosion

    SBC: APPLIED THIN FILMS, INC            Topic: N04250

    Ceramic matrix composites (CMCs) are being targeted for many military and commercial applications due to their lightweight and high temperature stability. CMCs possess high strength, and are being investigated for use in next-generation aircraft engines. CMCs show great promise for this application, but are subject to degradation from hot corrosion, a process in which atmospheric salts combine w ...

    SBIR Phase II 2006 Department of DefenseNavy
  8. CMAS mitigation for TBCs using a novel aluminum-phosphate based overlay coating

    SBC: APPLIED THIN FILMS, INC            Topic: N06032

    Applied Thin Films, Inc. proposes to use and an innovative aluminum phosphate solution based coating material to act as a sacrificial barrier layer to protect zirconia thermal barrier coatings from molten CMAS ingress and attack. The proposed coating material, known as Cerablak™, will ideally prevent any decrease in zirconia TBC lifetime expectancy and insulation efficiency due to CMAS infiltra ...

    SBIR Phase I 2006 Department of DefenseNavy
  9. Hybrid Propulsion Systems for Undersea Weapons

    SBC: Barber-Nichols, LLC            Topic: N05T024

    This STTR focuses on design of a hybrid propulsion system for a heavyweight torpedo. The hybrid torpedo propulsion system is designed to allow effective operation over a large turndown ratio, improving the weapon’s suitability for a broad range of missions including littoral water duty. The improved flexibility of hybrid torpedoes should improve the Pk and Pck (probability of kill, probability ...

    STTR Phase II 2006 Department of DefenseNavy
  10. Novel Manufacturing Process for High Power Laminated Lithium-Ion Batteries

    SBC: BOUNDLESS CORP.            Topic: OSD05MT7

    Boundless proposes to show the feasibility of an entirely new manufacturing process to enable efficient long-run or short-run production of a completely new, high-power, low-cost, lithium-ion polymer battery. Boundless will work with Lithium Technology Corporation to evaluate the feasibility of adapting existing battery manufacturing equipment to permit efficient short-run production and rapid ru ...

    SBIR Phase I 2006 Department of DefenseNavy
US Flag An Official Website of the United States Government