You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Universal Longwire Antenna Module for Unmanned Aerial Vehicles and Aircraft

    SBC: Sciperio, Inc.            Topic: SOCOM06003

    A longwire antenna module is proposed, incorporating a length reduction technique that yields 25-75% length reduction with minimal impact on gain. A resonant monopole antenna operating at 535kHz is approximately 440ft long; length reduction techniques will reduce this to between 69ft and 134ft depending upon the desired gain. A shorter/lighter longwire antenna will allow the aircraft to be more ...

    SBIR Phase I 2006 Department of DefenseSpecial Operations Command
  2. Conformal Appliqué Antennas for Unmanned Aerial Vehicles and Aircraft

    SBC: Sciperio, Inc.            Topic: SOCOM06002

    An antenna system is proposed for the purpose of FM, TV-VHF, and TV-UHF PSYPOS broadcast applications. The antenna system incorporates a radiating structure that is small, light weight, and conformal. A circularly polarized beam is broadcast from an aircraft towards nadir, illuminating the region below the craft with a horizontally-polarized signal, yielding polarizations pointing in both the No ...

    SBIR Phase I 2006 Department of DefenseSpecial Operations Command
  3. Design and Realization of a Dual Function OCM/MPM for Imaging TEMPs

    SBC: DISTANT FOCUS CORP            Topic: N/A

    Regenerative medicine is an emerging, interdisciplinary field that will result in new engineered medical products. The introduction of a high-resolution, non-destructive imaging technique that is capable of penetrating deeply into the highly-scattering scaffold medium has the means to accelerate the development and commercial utilization of these novel materials. Multi-photon microscopy (MPM) is b ...

    SBIR Phase II 2006 Department of CommerceNational Institute of Standards and Technology
  4. Emerging Weapons Technology Evaluation Model

    SBC: APPLIED SCIENCES LABORATORY, INC.            Topic: N/A

    Accelerated development of directed energy technologies has presented new problems to mission planners and weapon operators regarding the capabilities, lethality and performance of weapon systems. The Emerging Weapons Technology Evaluation Model willaddress these shortcomings by providing users of varying technical expertise 1) the ability to model a variety of weapons in various mission scenario ...

    SBIR Phase I 2003 Department of DefenseSpecial Operations Command
  5. Composite Stuff-Proof Windshield and Lightweight Pilothouse Assembly

    SBC: PACKER TECHNOLOGIES INTERNATIONAL (FORME            Topic: N/A

    The Phase II effort builds on Phase I. Phase II starts with an integrated product and process design and engineering analysis of the baseline structure described in the Phase I report and variants that may reduce cost and risk. The emphasis is on use ofnonlinear FEA with continuum analysis to handle stiffeners, window frames, and connectors. After review and approval by SOCOM, the design is fab ...

    SBIR Phase II 2003 Department of DefenseSpecial Operations Command
  6. Amplification of Molecular Signals

    SBC: MesoSystems Technology, Inc.            Topic: N/A

    The goal of the proposed research is to develop a highly sensitive and specific amplification system that can be coupled to any pathogen detection and quantification unit for sensitive real-time detection of biological warfare agents. The system is builtaround a dual-enzyme substrate-recycling electrochemical amplification system coupled to an immunoassay detection technology that has already been ...

    SBIR Phase I 2003 Department of DefenseOffice for Chemical and Biological Defense
  7. SOF Life Support Monitor

    SBC: Nomadics, Inc.            Topic: N/A

    Nomadics will undertake the development of a reduced footprint life support monitor for use in far-forward battle environments. Existing systems are bulky and weight constrained causing their ineffectiveness in scenarios where the warfighter is woundedand requires acute medical attention in a timely manner. The proposed system will rely on advancements being made to acute care medical sensors th ...

    SBIR Phase I 2003 Department of DefenseSpecial Operations Command
  8. Amplification of Molecular Signal Using Highly Stabilized Acoustic Wave Devices

    SBC: TPL, INC            Topic: N/A

    U.S. forces require rapid, early and accurate pathogen detection systems designed for use in extreme combat situations. Numerous options to deliver weaponized pathogens drives the necessity for U.S. forces to have technology to detect infectious pathogens.TPL has conceived a unique methodology for amplifying the presence of a pathogen without multiplying physical number of pathogens. TPL proposes ...

    SBIR Phase I 2003 Department of DefenseOffice for Chemical and Biological Defense
  9. CAD Model and CR and MRI Scan Data to MCNP Input Format Conversion Software

    SBC: White Rock Science            Topic: N/A

    We will develop two programs to process data describing a model geometry and convert it to input acceptable to the Monte Carlo transport codes MCNP and MCNPX. One program will read CAD files in the ACIS solid body SAT format. Solid bodies, surfaces, and cells described in the SAT file will be converted to equivalent MCNP objects where available. Where there is no MCNP equivalent, such as for splin ...

    SBIR Phase I 2003 Department of CommerceNational Institute of Standards and Technology
  10. Aerosol Collector Technology

    SBC: ZAROMB RESEARCH CORP            Topic: N/A

    An electrostatic precipitation-based aerosol collector will be designed, constructed, tested, and fine-tuned with the aim of demonstrating the practicality of a low-power system capable of sampling air at a rate of >500 liters/minute and collectingtherefrom >80% of particles 1-10 microns in size into a small volume [

    SBIR Phase I 2003 Department of DefenseOffice for Chemical and Biological Defense
US Flag An Official Website of the United States Government