Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Design and Realization of a Dual Function OCM/MPM for Imaging TEMPs

    SBC: Distant Focus Corporation            Topic: N/A

    Regenerative medicine is an emerging, interdisciplinary field that will result in new engineered medical products. The introduction of a high-resolution, non-destructive imaging technique that is capable of penetrating deeply into the highly-scattering scaffold medium has the means to accelerate the development and commercial utilization of these novel materials. Multi-photon microscopy (MPM) is b ...

    SBIR Phase II 2006 Department of CommerceNational Institute of Standards and Technology
  2. Distributed Automatic Reconfigurable Transponder (DART)

    SBC: WILLIAMSRDM, INC.            Topic: N/A

    Williams-Pyro, Inc. (WPI) has designed and successfully demonstrated a proof-of-concept of the Distributed Automatic Reconfigurable Transponder (DART) that will be capable of achieving distributed multi-nodal voice/data communication for fire fighters. In Phase 2 we will focus on developing a fully functional system that reduces communication failure while maintaining a robust and flexible system. ...

    SBIR Phase II 2006 Department of CommerceNational Institute of Standards and Technology
  3. Miniature Netted Sensors

    SBC: WILLIAMSRDM, INC.            Topic: SOCOM06015

    Williams-Pyro proposes to develop an AccuTag Miniature Surveillance and Tracking System (Accu-MiSTS). Accu-MiSTS employs cluster management techniques and ad-hoc networking to provide a readily scalable architecture with which to perform comprehensive surveillance. A cluster is comprised of one supernode and up to 65,536 nodes, all of which are within the communication range of at least one other ...

    SBIR Phase I 2006 Department of DefenseSpecial Operations Command
  4. Advanced Tools for Process Specification Language

    SBC: KNOWLEDGE BASED SYSTEMS, INC.            Topic: N/A

    This project will (i) extend and harden the PSL Editor and the Ontology-Driven XSLT Generator (ODXG) tools and (ii) extend the process description syntax (PDS) derived from the PSL for both KIF and XML/RDF formats. In addition, we will extend the PSL metatheoretical framework to support the PDS and the PSL tools by providing PSL extensions to support calendars and activity specialization, and by d ...

    SBIR Phase II 2003 Department of CommerceNational Institute of Standards and Technology
  5. PSL-based Process Knowledge Integration and Management Framework

    SBC: KNOWLEDGE BASED SYSTEMS, INC.            Topic: N/A

    We propose to develop a robust framework, called the Process Knowledge Integration and Management Framework (PKIMF), to support the complete lifecycle of enterprise process knowledge that natively use the Process Specification Language (PSL). PKIMF uses a dashboard approach to design, analyze, integrate, exchange, and manage process knowledge. Its features and capabilities include the use of a pro ...

    SBIR Phase I 2003 Department of CommerceNational Institute of Standards and Technology
  6. CAD Model and CR and MRI Scan Data to MCNP Input Format Conversion Software

    SBC: White Rock Science            Topic: N/A

    We will develop two programs to process data describing a model geometry and convert it to input acceptable to the Monte Carlo transport codes MCNP and MCNPX. One program will read CAD files in the ACIS solid body SAT format. Solid bodies, surfaces, and cells described in the SAT file will be converted to equivalent MCNP objects where available. Where there is no MCNP equivalent, such as for splin ...

    SBIR Phase I 2003 Department of CommerceNational Institute of Standards and Technology
  7. Development of Multifunctional Open-system Sensor Integration Tool (MOSIT)

    SBC: WILLIAMSRDM, INC.            Topic: N/A

    Williams-Pyro, Inc. proposes to model and develop software to provide an interface allowing a common method of incorporating sensing components within different systems. The proposed software package, called the Multifunctional Open-system Sensor Integration Tool (MOSIT), will provide the circuit designer with a complete sensor interface solution. MOSIT will provide not only the Network Capable Ap ...

    SBIR Phase I 2003 Department of CommerceNational Institute of Standards and Technology
  8. Development of the Smart Environmental Monitoring System (SEMS)

    SBC: WILLIAMSRDM, INC.            Topic: N/A

    Firefighters have expressed the need for both increased accuracy in fire detection systems and greater access to environmental information in the event of a fire. To accomplish both tasks, Williams-Pyro, Inc. proposes to develop the Smart Environmental Monitoring System (SEMS). This system comprises both an advanced fire detection system and the networking capability necessary to provide real-time ...

    SBIR Phase II 2003 Department of CommerceNational Institute of Standards and Technology
  9. Automated Reconfiguable Intelligent Radio (ARIR)

    SBC: WILLIAMSRDM, INC.            Topic: N/A

    Williams-Pyro, Inc. proposes to develop an Automated Reconfigurable Intelligent Radio (ARIR), which consists of a series of distributed nodes that will relay voice and data to Intelligent Access Points (IAP) located within the building. This system will allow faster, more accurate information transmission, resulting in timely fire detection and safer firefighting. The main goal of ARIR is to ident ...

    SBIR Phase I 2003 Department of CommerceNational Institute of Standards and Technology
  10. Dual-Probe CD-AFM Calibration

    SBC: XIDEX CORPORATION            Topic: N/A

    Xidex proposes to demonstrate the feasibility of calibrating a critical-dimension atomic force microscope (CD-AFM) without the use of a reference artifact in such a way that high-precision critical dimensions can be generated independently of changes in probe tip shape (including the effects of tip wear), presence of the surface force uncertainties, and the stage uncertainties. The proposed calibr ...

    SBIR Phase I 2003 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government