Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Design and Realization of a Dual Function OCM/MPM for Imaging TEMPs

    SBC: Distant Focus Corporation            Topic: N/A

    Regenerative medicine is an emerging, interdisciplinary field that will result in new engineered medical products. The introduction of a high-resolution, non-destructive imaging technique that is capable of penetrating deeply into the highly-scattering scaffold medium has the means to accelerate the development and commercial utilization of these novel materials. Multi-photon microscopy (MPM) is b ...

    SBIR Phase II 2006 Department of CommerceNational Institute of Standards and Technology
  2. Renewable Electric Energy Source for Special Operations Force (SOF) Maritime Combatant Craft

    SBC: INFINIA CORPORATION            Topic: SOCOM05001

    Stirling Technology Company (STC) has developed several Free-Piston Stirling Engine (FPSE) generators with outputs ranging from 10 W to 3 kW. These engines are very quiet, adaptable to virtually any fuel, and can run continuously. However, existing units are relatively heavy. STC proposes to leverage over 2 decades of development into a Special Operations Power System (SOPS) that directly addresse ...

    SBIR Phase I 2006 Department of DefenseSpecial Operations Command
  3. High power single frequency source for cavity ring-down spectroscopy

    SBC: Aculight Corporation            Topic: N/A

    Aculight proposes to develop a laser source that will enable NIST to perform highly sensitive water vapor detection via cavity ring-down spectroscopy. The source will operate over a wavelength region centered at 1380nm. It will be based upon frequency conversion of a single frequency fiber source using an optical parametric oscillator (OPO).The performance of the source in terms of several critica ...

    SBIR Phase I 2003 Department of CommerceNational Institute of Standards and Technology
  4. CAD Model and CR and MRI Scan Data to MCNP Input Format Conversion Software

    SBC: White Rock Science            Topic: N/A

    We will develop two programs to process data describing a model geometry and convert it to input acceptable to the Monte Carlo transport codes MCNP and MCNPX. One program will read CAD files in the ACIS solid body SAT format. Solid bodies, surfaces, and cells described in the SAT file will be converted to equivalent MCNP objects where available. Where there is no MCNP equivalent, such as for splin ...

    SBIR Phase I 2003 Department of CommerceNational Institute of Standards and Technology
  5. Hand-held, Standoff Chemical-Biological Hazard Detector

    SBC: Aculight Corporation            Topic: N/A

    SOCOM, other military branches, and civilian authorities (homeland defense) need ways to rapidly determine the presence of chemical and biological threats and classify their nature. Standoff detection of the threats would greatly enhance personnel safetyand allow more operational flexibility.We propose a novel laser-based system allowing remote measurements of the infrared spectra of aerosols, va ...

    SBIR Phase I 2003 Department of DefenseSpecial Operations Command
  6. Emerging Weapons Technology Evaluation Model

    SBC: APPLIED SCIENCES LABORATORY, INC.            Topic: N/A

    Accelerated development of directed energy technologies has presented new problems to mission planners and weapon operators regarding the capabilities, lethality and performance of weapon systems. The Emerging Weapons Technology Evaluation Model willaddress these shortcomings by providing users of varying technical expertise 1) the ability to model a variety of weapons in various mission scenario ...

    SBIR Phase I 2003 Department of DefenseSpecial Operations Command
  7. Composite Stuff-Proof Windshield and Lightweight Pilothouse Assembly

    SBC: PACKER TECHNOLOGIES INTERNATIONAL (FORME            Topic: N/A

    The Phase II effort builds on Phase I. Phase II starts with an integrated product and process design and engineering analysis of the baseline structure described in the Phase I report and variants that may reduce cost and risk. The emphasis is on use ofnonlinear FEA with continuum analysis to handle stiffeners, window frames, and connectors. After review and approval by SOCOM, the design is fab ...

    SBIR Phase II 2003 Department of DefenseSpecial Operations Command
  8. Composite, Stuff-Proof Windshield and Lightweight Pilothouse Assembly

    SBC: PACKER TECHNOLOGIES INTERNATIONAL (FORME            Topic: N/A

    In this Phase I SBIR Program, K+P Agile will develop a high strength, lightweight, modular, composite windshield structure for the MK V Special Operations Craft (SOC) that will not fail when the craft passes through a wave (or

    SBIR Phase I 2001 Department of DefenseSpecial Operations Command
  9. Extreme Environment Handwear System

    SBC: OUTDOOR RESEARCH            Topic: N/A

    We have identified a multi-component glove/mitt system that will be suitable for the requirements of SOF personnel. This system, as described in our Phase I report, consists of the CCL, the IWDG, the NGG, the FRP, and the TFM. Based on user feedback weintend to suplement this offering with an Advanced Warm Dry Glove (AWDG), and an Extremely Warm Dry Glove in two variants, a Marine Transit versio ...

    SBIR Phase II 2001 Department of DefenseSpecial Operations Command
US Flag An Official Website of the United States Government