You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Development of enhanced active damping system for the Marine Corps Expeditionary Fighting Vehicle (EFV)
SBC: ACTIVE SHOCK, INC. Topic: N04192A semi-active suspension upgrade kit for the SOCOM up-armored HMWWV will be developed that will achieve comparable performance for the entire weight range of a GMV: 8300lbs curb weight to 14,500lbs combat loaded. The baseline performance requirement is equivalent handling, stability and ride quality as an M1113 HMMWV at rated GVW. A dynamic model that incorporates the semi-active suspension into ...
SBIR Phase II 2006 Department of DefenseSpecial Operations Command -
Design and Realization of a Dual Function OCM/MPM for Imaging TEMPs
SBC: DISTANT FOCUS CORP Topic: N/ARegenerative medicine is an emerging, interdisciplinary field that will result in new engineered medical products. The introduction of a high-resolution, non-destructive imaging technique that is capable of penetrating deeply into the highly-scattering scaffold medium has the means to accelerate the development and commercial utilization of these novel materials. Multi-photon microscopy (MPM) is b ...
SBIR Phase II 2006 Department of CommerceNational Institute of Standards and Technology -
A Fusion Based Tactical Biometric Registration and Recognition Toolset
SBC: SPACEFLIGHT SYSTEMS CORP Topic: SOCOM06004Human biometric recognition systems are essential in the automated personal identification and verification applications market. This market spans the commercial and military sectors to include a myriad of identification applications from secure entrance, to time card clocks, to bio-certified delivery systems, to automobiles that recognize their drivers, to money transaction systems, to weapons th ...
SBIR Phase I 2006 Department of DefenseSpecial Operations Command -
Seat/Bolster/Other
SBC: ACTIVE SHOCK, INC. Topic: N/AA shock mitigating suspended seat, which places the Special Forces Operator in an optimal ergonomic position, will be developed for use in the NSW 11M RIB. It will feature a semi-actively controlled shock absorber to optimize the suspension for a broadrange of operator weights and sea states. In the Phase I effort, a conceptual design and architecture for both control hardware and software was d ...
SBIR Phase II 2003 Department of DefenseSpecial Operations Command -
Emerging Weapons Technology Evaluation Model
SBC: APPLIED SCIENCES LABORATORY, INC. Topic: N/AAccelerated development of directed energy technologies has presented new problems to mission planners and weapon operators regarding the capabilities, lethality and performance of weapon systems. The Emerging Weapons Technology Evaluation Model willaddress these shortcomings by providing users of varying technical expertise 1) the ability to model a variety of weapons in various mission scenario ...
SBIR Phase I 2003 Department of DefenseSpecial Operations Command -
Development of Frequency Hopper/DSSS Detection Algorithms
SBC: Herrick Technology Laboratories Inc. Topic: N/AThe development of a hardware module for installation in DRT Receiver hardware to allow for the real-time detection and identification of FH and DSSS spread spectrum signals using the FDDM algorithm developed under Phase I.
SBIR Phase II 2003 Department of DefenseSpecial Operations Command -
Composite Stuff-Proof Windshield and Lightweight Pilothouse Assembly
SBC: PACKER TECHNOLOGIES INTERNATIONAL (FORME Topic: N/AThe Phase II effort builds on Phase I. Phase II starts with an integrated product and process design and engineering analysis of the baseline structure described in the Phase I report and variants that may reduce cost and risk. The emphasis is on use ofnonlinear FEA with continuum analysis to handle stiffeners, window frames, and connectors. After review and approval by SOCOM, the design is fab ...
SBIR Phase II 2003 Department of DefenseSpecial Operations Command -
CAD Model and CR and MRI Scan Data to MCNP Input Format Conversion Software
SBC: White Rock Science Topic: N/AWe will develop two programs to process data describing a model geometry and convert it to input acceptable to the Monte Carlo transport codes MCNP and MCNPX. One program will read CAD files in the ACIS solid body SAT format. Solid bodies, surfaces, and cells described in the SAT file will be converted to equivalent MCNP objects where available. Where there is no MCNP equivalent, such as for splin ...
SBIR Phase I 2003 Department of CommerceNational Institute of Standards and Technology -
Composite, Stuff-Proof Windshield and Lightweight Pilothouse Assembly
SBC: PACKER TECHNOLOGIES INTERNATIONAL (FORME Topic: N/AIn this Phase I SBIR Program, K+P Agile will develop a high strength, lightweight, modular, composite windshield structure for the MK V Special Operations Craft (SOC) that will not fail when the craft passes through a wave (or
SBIR Phase I 2001 Department of DefenseSpecial Operations Command -
MICRO COMPUTER BASED PARALLEL PROCESSING SYSTEM FOR CODE COMPUTATIONS
SBC: Risk Management Systems Topic: N/AN/A
SBIR Phase I 1988 Nuclear Regulatory Commission