You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Fine and Course Particulate Continuous Emissions Monitoring

    SBC: Baldwin Environmental, Inc.            Topic: N/A

    Baldwin Environmental Inc. (BEI) successfully completed an SBIR Phase I project that demonstrated the feasibility of designing and producing a Fine and Coarse Particulate Monitoring System (FCPMCEMS). This system simultaneously measures and reports mass concentrations of fine and coarse particulate material using Atmospheric Dispersion Simulation and Beta Attenuation Monitoring (BAM). A design a ...

    SBIR Phase II 2006 Environmental Protection Agency
  2. Design and Realization of a Dual Function OCM/MPM for Imaging TEMPs

    SBC: DISTANT FOCUS CORP            Topic: N/A

    Regenerative medicine is an emerging, interdisciplinary field that will result in new engineered medical products. The introduction of a high-resolution, non-destructive imaging technique that is capable of penetrating deeply into the highly-scattering scaffold medium has the means to accelerate the development and commercial utilization of these novel materials. Multi-photon microscopy (MPM) is b ...

    SBIR Phase II 2006 Department of CommerceNational Institute of Standards and Technology
  3. Development of a Reliable, Low-Cost and User-Friendly Spot Test Kit for Leaded Paint and Dust Based on Recent Advances in Bionanotechnology

    SBC: ANDALYZE, INC.            Topic: N/A

    Lead in household paint and dust is a serious health hazard as low level lead exposure can result in a number o adverse health effects, especially in children. On-site and real-time detection and quantification of lead in the paint/dust is very important to homeowners and certified lead-based paint removal professionals. Toward this end, both field-portable equipment (such as x-ray fluorescence ...

    SBIR Phase I 2006 Environmental Protection Agency
  4. Ultra Sensitive Rama Device for Detecting Arsenic in Water Utilizing Fractal/Microcavity Composite

    SBC: LaSys, Inc.            Topic: N/A

    LaSys, Inc., utilizing the unique spectral characteristics of its proprietary fractal-microcavity composite will be used to perform the proof-of-concept research required to develop an ultra-sensitive optical detector of low concentration of arsenic in water based on the Raman effect. Phase I technical objectives are designed to demonstrate that fractal microcavity composite - SERS spectroscopy i ...

    SBIR Phase I 2006 Environmental Protection Agency
  5. A Compact, Low-Cost, Near-UV Sensor for Chlorine Dioxide

    SBC: SOUTHWEST SCIENCES INC            Topic: N/A

    Southwest Sciences proposes the development of an optical, near-ultraviolet chlorine dioxide sensor having a measurement range for about 0.01 to 2000 ppm with a response time of less than 10 seconds. The sensors will be compact - about the size of a 1quart milk carton including electronic and optics - operate a low power, and be outfitted with wireless communications interface to permit remote, u ...

    SBIR Phase I 2006 Environmental Protection Agency
  6. A Compact, Low-Cost, Near-UV Sensor for Chlorine Dioxide

    SBC: SOUTHWEST SCIENCES INC            Topic: 05NCERD6

    Southwest Sciences proposes the development of an optical, near-ultraviolet chlorine dioxide (ClO2) sensor having a measurement range of about 0.01 to 2000 ppm with a response time of less than 10 seconds. The sensor will be compact—about the size of a 1-quart milk carton including electronic and optics, operate at low power, and be outfitted with a wireless communications interface to permit re ...

    SBIR Phase I 2006 Environmental Protection Agency
  7. POE/POU Akaganeite Treatment Systems for the Removal of Arsenic from Drinking Water

    SBC: LaSys, Inc.            Topic: 05NCERD7

    Using the unique spectral characteristics of its proprietary fractal-microcavity composite, LaSys, Inc., will perform the proof-of-concept research required to develop an ultra-sensitive optical detector of low concentration of arsenic in water based on the Raman effect. The Phase I technical objectives are designed to demonstrate that fractal microcavity composite-surface-enhanced ...

    SBIR Phase I 2006 Environmental Protection Agency
  8. Development of a Reliable, Low-Cost and User-Friendly Spot Test Kit for Leaded Paint and Dust Based on Recent Advances in Bionanotechnology

    SBC: ANDALYZE, INC.            Topic: 05NCERD9

    Lead in household paint and dust is a serious health hazard, as low-level lead exposure can result in a number of adverse health effects, especially in children. Onsite and real-time detection and quantification of lead in paint/dust are very important to homeowners and certified lead-based paint removal professionals. Toward this end, both field-portable equipment (such as X-ray fluorescenc ...

    SBIR Phase I 2006 Environmental Protection Agency
  9. Development of a Fine and Coarse Particulate Continuous Emissions Monitoring System

    SBC: Baldwin Environmental, Inc.            Topic: 05NCERP1

    In Phase I of this research project, Baldwin Environmental, Inc. (BEI) successfully demonstrated the feasibility of designing and producing a Fine and Coarse Particulate Monitoring Continuous Emissions Monitoring System (FCPMCEMS). This system simultaneously measures and reports mass concentrations of fine and coarse particulate material using atmospheric dispersion simulation (ADS) a ...

    SBIR Phase II 2006 Environmental Protection Agency
  10. Microfabrication and Micromaching- correct DUN# 142425888

    SBC: Atometric, Inc.            Topic: N/A

    Biotechnology, aerospace, automotive and communications industries need small ultra-precise, three dimensional parts for component miniaturization. Present metal cutting technology is rapidly reaching its limits. A new technology is required to accelerate this trend. Atometric will pursue innovations in ultra-precision multi-axis machine tools. The machining capacity will be within a cube of 50 mm ...

    SBIR Phase I 2004 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government