Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. High Power, Mid-Infrared Fiber Supercontinuum Light Source

    SBC: MESA PHOTONICS, LLC            Topic: N/A

    Modern supercontinuum (SC) light sources are generated by non-linear interactions between ultrashort pulse lasers and optical fibers. Output in near-ultraviolet to near-infrared wavelength ranges has been demonstrated. These light sources have high brightness and are spatially coherent. Recently, output to 4.5 µm was achieved using fluoride glass fibers; optical absorption by the fiber prevents l ...

    SBIR Phase I 2008 Department of CommerceNational Institute of Standards and Technology
  2. Innovative Residential Fire Sensor

    SBC: Southwest Sciences, Inc.            Topic: N/A

    Southwest Sciences proposes development of residential fire sensing systems based on low cost optical imaging sensors combined with newly introduced highly miniaturized, low power CO sensors. Sensor modules will also include temperature sensors. The modules will be part of a low power wireless network. Each module will be about ½ the size of a business card, a few mm thick, and will operate for ...

    SBIR Phase I 2008 Department of CommerceNational Institute of Standards and Technology
  3. A Microcalorimeter Alpha Spectrometer for Analysis of Nuclear Material

    SBC: STAR CRYOELECTRONICS LLC            Topic: N/A

    A key factor of international efforts to identify and suppress the supply of and demand for nuclear materials, and thereby to deter potential traffickers, is the ability to accurately identify contradicted material and ultimately to trace it back to its origin. Alpha particle spectroscopy is widely used in nuclear forensics to assay trace quantities of sensitive nuclear materials, but the limited ...

    SBIR Phase I 2008 Department of CommerceNational Institute of Standards and Technology
  4. Design and Realization of a Dual Function OCM/MPM for Imaging TEMPs

    SBC: Distant Focus Corporation            Topic: N/A

    Regenerative medicine is an emerging, interdisciplinary field that will result in new engineered medical products. The introduction of a high-resolution, non-destructive imaging technique that is capable of penetrating deeply into the highly-scattering scaffold medium has the means to accelerate the development and commercial utilization of these novel materials. Multi-photon microscopy (MPM) is b ...

    SBIR Phase II 2006 Department of CommerceNational Institute of Standards and Technology
  5. CAD Model and CR and MRI Scan Data to MCNP Input Format Conversion Software

    SBC: White Rock Science            Topic: N/A

    We will develop two programs to process data describing a model geometry and convert it to input acceptable to the Monte Carlo transport codes MCNP and MCNPX. One program will read CAD files in the ACIS solid body SAT format. Solid bodies, surfaces, and cells described in the SAT file will be converted to equivalent MCNP objects where available. Where there is no MCNP equivalent, such as for splin ...

    SBIR Phase I 2003 Department of CommerceNational Institute of Standards and Technology
  6. Emerging Weapons Technology Evaluation Model

    SBC: APPLIED SCIENCES LABORATORY, INC.            Topic: N/A

    Accelerated development of directed energy technologies has presented new problems to mission planners and weapon operators regarding the capabilities, lethality and performance of weapon systems. The Emerging Weapons Technology Evaluation Model willaddress these shortcomings by providing users of varying technical expertise 1) the ability to model a variety of weapons in various mission scenario ...

    SBIR Phase I 2003 Department of DefenseSpecial Operations Command
  7. Composite Stuff-Proof Windshield and Lightweight Pilothouse Assembly

    SBC: PACKER TECHNOLOGIES INTERNATIONAL (FORME            Topic: N/A

    The Phase II effort builds on Phase I. Phase II starts with an integrated product and process design and engineering analysis of the baseline structure described in the Phase I report and variants that may reduce cost and risk. The emphasis is on use ofnonlinear FEA with continuum analysis to handle stiffeners, window frames, and connectors. After review and approval by SOCOM, the design is fab ...

    SBIR Phase II 2003 Department of DefenseSpecial Operations Command
  8. Composite, Stuff-Proof Windshield and Lightweight Pilothouse Assembly

    SBC: PACKER TECHNOLOGIES INTERNATIONAL (FORME            Topic: N/A

    In this Phase I SBIR Program, K+P Agile will develop a high strength, lightweight, modular, composite windshield structure for the MK V Special Operations Craft (SOC) that will not fail when the craft passes through a wave (or

    SBIR Phase I 2001 Department of DefenseSpecial Operations Command
US Flag An Official Website of the United States Government