You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. High Power, Mid-Infrared Fiber Supercontinuum Light Source

    SBC: MESA PHOTONICS LLC            Topic: N/A

    Modern supercontinuum (SC) light sources are generated by non-linear interactions between ultrashort pulse lasers and optical fibers. Output in near-ultraviolet to near-infrared wavelength ranges has been demonstrated. These light sources have high brightness and are spatially coherent. Recently, output to 4.5 µm was achieved using fluoride glass fibers; optical absorption by the fiber prevents l ...

    SBIR Phase I 2008 Department of CommerceNational Institute of Standards and Technology
  2. Innovative Residential Fire Sensor

    SBC: SOUTHWEST SCIENCES INC            Topic: N/A

    Southwest Sciences proposes development of residential fire sensing systems based on low cost optical imaging sensors combined with newly introduced highly miniaturized, low power CO sensors. Sensor modules will also include temperature sensors. The modules will be part of a low power wireless network. Each module will be about ½ the size of a business card, a few mm thick, and will operate for ...

    SBIR Phase I 2008 Department of CommerceNational Institute of Standards and Technology
  3. A Microcalorimeter Alpha Spectrometer for Analysis of Nuclear Material

    SBC: STAR CRYOELECTRONICS, LLC            Topic: N/A

    A key factor of international efforts to identify and suppress the supply of and demand for nuclear materials, and thereby to deter potential traffickers, is the ability to accurately identify contradicted material and ultimately to trace it back to its origin. Alpha particle spectroscopy is widely used in nuclear forensics to assay trace quantities of sensitive nuclear materials, but the limited ...

    SBIR Phase I 2008 Department of CommerceNational Institute of Standards and Technology
  4. Design and Realization of a Dual Function OCM/MPM for Imaging TEMPs

    SBC: DISTANT FOCUS CORP            Topic: N/A

    Regenerative medicine is an emerging, interdisciplinary field that will result in new engineered medical products. The introduction of a high-resolution, non-destructive imaging technique that is capable of penetrating deeply into the highly-scattering scaffold medium has the means to accelerate the development and commercial utilization of these novel materials. Multi-photon microscopy (MPM) is b ...

    SBIR Phase II 2006 Department of CommerceNational Institute of Standards and Technology
  5. Directed Energy Tactical Mission Analysis Code

    SBC: APPLIED SCIENCES LABORATORY, INC.            Topic: SOCOM03007

    The Directed Energy Tactical Mission Application Code (DETMAC) is a mission planning simulation tool to model directed-energy weapon capabilities, target vulnerabilities, and environmental constraints. It will be used by mission planners to visualize an entire mission timeline and prompt development of optimal tactics, techniques and procedures for successful employment of new weapon capabilities ...

    SBIR Phase II 2005 Department of DefenseSpecial Operations Command
  6. Microfabrication and Micromaching

    SBC: Atometric, Inc.            Topic: N/A

    During Phase 1 Atometric developed and demonstrated principles of a four-axis micro machine. This machine is capable of machining metal parts that are sized within 50mm cube to an accuracy within one micron. Our goal is to develop a micro machine that is applicable to a broad commercial market. Three additional features need to be added to make the machine fully commercially viable. These three fe ...

    SBIR Phase II 2005 Department of CommerceNational Institute of Standards and Technology
  7. Design and Realization of a Dual Function OCM/MPM for Imaging TEMPS

    SBC: DISTANT FOCUS CORP            Topic: N/A

    Regenerative medicine is an emerging, interdisciplinary field that will result in new engineered medical products. The introduction of a high-resolution, non-destructive imaging technique that is capable of penetrating deeply into the highly-scattering scaffold medium has the means to accelerate the development and commercial utilization of these novel materials. Multi-photon microscopy (MPM) is b ...

    SBIR Phase I 2005 Department of CommerceNational Institute of Standards and Technology
  8. Alternative Power Sources

    SBC: SmartSpark            Topic: SOCOM04008

    This project will develop fully functional prototypes of a battery-free portable power source that can be deployed in remote, unattended locations. The power source will provide up to five watt-hours per day under extreme weather conditions for a minimum of four years without maintenance. The design relies on solar energy, and uses ultracapacitors for energy storage. A modular interconnect ...

    SBIR Phase II 2005 Department of DefenseSpecial Operations Command
  9. Low-Cost Microcalorimeter Spectrometer for X-Ray Macroanalysis

    SBC: STAR CRYOELECTRONICS, LLC            Topic: N/A

    A low-cost superconducting transition edge sensor (TES) microcalorimeter spectrometer is described for high energy and high spatial resolution X-ray energy dispersive spectroscopy and microanalysis. The proposed microcalorimeter instrument offers an energy resolution that is comparable to and potentially even better than wavelength dispersive spectrometers, thereby enabling the resolution of inter ...

    SBIR Phase II 2005 Department of CommerceNational Institute of Standards and Technology
  10. Composite, Stuff-Proof Windshield and Lightweight Pilothouse Assembly

    SBC: PACKER TECHNOLOGIES INTERNATIONAL (FORME            Topic: N/A

    In this Phase I SBIR Program, K+P Agile will develop a high strength, lightweight, modular, composite windshield structure for the MK V Special Operations Craft (SOC) that will not fail when the craft passes through a wave (or

    SBIR Phase I 2001 Department of DefenseSpecial Operations Command
US Flag An Official Website of the United States Government