You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. A Portable Laser Device for Remote Filler Identification

    SBC: AAC International            Topic: DTRA122012

    The proposed SBIR research (Phase I and II) is devoted to developing a laser-based acousto-ultrasonic system for inspection of sealed containers. The system represents a promising technology for improving safety management in anti-terrorism and treaty compliance operations. The system will use a pulsed laser to excite the container and a laser Doppler vibrometer for long stand-off vibratory (ult ...

    SBIR Phase I 2013 Department of DefenseDefense Threat Reduction Agency
  2. Weather Information Services Supporting Civilian UAS Operations

    SBC: THE INNOVATION LABORATORY, INC.            Topic: A201

    We build a system that supports the weather information needs of Unmanned Aircraft Systems (UAS) planning to fly in the National Airspace System (NAS). This weather information service will supply information to UAS Ground Control Stations (GCSs) from the Next Generation Air Transportation System (NextGen) 4D Weather Data Cube, the Single Authoritative Source (SAS) for aviation weather informati ...

    SBIR Phase I 2013 National Aeronautics and Space Administration
  3. FACET as a Collaborative, Open Source UAS Research Platform

    SBC: THE INNOVATION LABORATORY, INC.            Topic: A201

    We build a tool that accelerates Research and Development (R & D) aimed at introducing Unmanned Aircraft Systems (UAS) into the National Airspace System (NAS). In the proposed effort, FACET will form the basis of a collaborative R & D platform, an environment where users can share open source software modules (software and data sets developed to reside outside the FACET Application Programmers In ...

    SBIR Phase I 2013 National Aeronautics and Space Administration
  4. Advanced Microgravity Compatible, Integrated Laundry System

    SBC: UMPQUA RESEARCH COMPANY            Topic: X302

    An Advanced Microgravity Compatible, Integrated laundry System (AMCILS) is proposed that uses a two phase water / water vapor system to allow good agitation of clothing during the wash & rinse cycle. Drying will be accomplished utilizing microwave energy addition and "jet" air flow to fluff and move clothing in the washing chamber. Operation in a two phase water / water vapor system precludes th ...

    SBIR Phase II 2013 National Aeronautics and Space Administration
  5. A Turbo-Brayton Cryocooler for Aircraft Superconducting Systems

    SBC: CREARE LLC            Topic: A201

    Hybrid turboelectric aircraft with gas turbines driving electric generators connected to electric propulsion motors have the potential to transform the aircraft design space by decoupling power generation from propulsion. Resulting aircraft designs such as blended-wing bodies with distributed propulsion can provide the large reductions in emissions, fuel burn, and noise required to make air trans ...

    SBIR Phase II 2013 National Aeronautics and Space Administration
  6. Scandate Cathode for High Power Long Life Electric Propulsion

    SBC: E BEAM INC            Topic: E101

    Scandate cathodes are proposed as a way to boost performance and life for electric space propulsion systems. This company has recently demonstrated breakthrough performance on these cathodes in other formats. We have demonstrated emission of 5 Amps/cm2 at 850 degrees CB, which is 200 degrees C below that of conventional cathodes. At this temperature they should live at least 100,000 hours. Thi ...

    SBIR Phase I 2013 National Aeronautics and Space Administration
  7. A Novel Plasma-Based Compressor Stall Control System

    SBC: CREARE LLC            Topic: A308

    Modern aircraft gas turbine engines utilize highly loaded airfoils in both the compressor and turbine to maximize performance while minimizing weight, cost, and complexity. However, high airfoil loading increases the likelihood of flow separation at lower mass flow rates. Dielectric Barrier Discharge (DBD) plasma actuators have been shown to be a very promising technique for compressor stall con ...

    SBIR Phase I 2013 National Aeronautics and Space Administration
  8. A Reliable, Efficient Cryogenic Propellant Mixing Pump with No Moving Parts

    SBC: CREARE LLC            Topic: H201

    Refueling spacecraft in space offers tremendous benefits for increased spacecraft payload capacity and reduced launch cost. A key technology challenge for space refueling is the storage of liquid cryogenic fuel in space. To meet this need, we propose to develop a reliable, compact, efficient cryogenic mixing pump with no moving parts. The mixing pump will prevent thermal stratification of the c ...

    SBIR Phase I 2013 National Aeronautics and Space Administration
  9. Turbo-Brayton Power Converter for Spaceflight Applications

    SBC: CREARE LLC            Topic: H803

    Future NASA space missions require advanced systems to convert thermal energy into electric power. These systems must be reliable, efficient, and lightweight. In response, we propose to develop a turbo-Brayton power converter with high efficiency and specific power. The converter will use gas bearings to provide reliable, maintenance-free, long-life operation. It will also consist of discrete ...

    SBIR Phase I 2013 National Aeronautics and Space Administration
  10. Advanced Capabilities Medical Suction Device

    SBC: UMPQUA RESEARCH COMPANY            Topic: H1202

    A compact microgravity and hypogravity compatible vacuum device is proposed to provide medical suction and containment of extracted fluids. The proposed aspirator will draw up to 40 L/min of air and produce a nominal vacuum of 500-mm Hg, which is comparable to commercially available medical aspirators. The unit will also provide a means for separation and containment of up to 1000 mL of aspirate ...

    SBIR Phase I 2013 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government