Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Inline Material Electrical Characterization Sensor (IMECS)

    SBC: PANERATECH, INC.            Topic: N/A

    There is no capability to rapidly assess the electrical properties of nanofiber films during manufacturing and prepregging process. Continuous monitoring of these films will guide the U.S. nanofiber manufacturing industry in optimizing and increasing the yield rate with proper process optimization and avoid any inconsistency in the process and the cost with associated waste material. To address th ...

    SBIR Phase II 2013 Department of CommerceNational Institute of Standards and Technology
  2. Smart Manufacturing Workflow Environment

    SBC: Nimbis Services, Inc.            Topic: N/A

    Nimbis in partnership with UCLA and Smart Manufacturing Leadership Coalition (SMLC) will provide an open workflow environment that supports the sequential execution of 3rd party APPS using net-worked information based modeling and data analytic technologies to integrate manufacturing intelligence across an entire manufacturing ecosystem. The SMWE leverages Nimbis commercial cloud technical analysi ...

    SBIR Phase I 2013 Department of CommerceNational Institute of Standards and Technology
  3. Domain-Specific Modeling Environment for Autonomous System Demonstration and Experimentation

    SBC: TORC Robotics, INC.            Topic: OSD12AU2

    The TORC team, which includes Dr. Jonathan Sprinkle of the University of Arizona (UA), will develop enabling software and modeling methods for the Autonomous System Demonstration and Experimentation Workbench. The workbench will assist test engineers, systems engineers and analysts in designing and equipping autonomous unmanned vehicles for a variety of operations. The proposed work is based on o ...

    SBIR Phase I 2013 Department of DefenseDefense Threat Reduction Agency
  4. Reactive Structural Materials for Enhanced Blasts

    SBC: Matsys Incorporated            Topic: DTRA122008

    MATSYS proposes to develop reactive materials compositions and processing techniques for structural reactive composites for blast enhancement. This effort will combine our unique expertise in instrumented-Hot Isostatic Pressing (HIP) with new approaches in reactive materials design to develop a new generation of cost-efficient and highly reactive materials. The proposed material system will use ...

    SBIR Phase I 2013 Department of DefenseDefense Threat Reduction Agency
  5. Covert Optically-Reporting Threat-Functionalized Nanomaterials

    SBC: VOXTEL, INC.            Topic: DTRA122003

    The Defense Threat Reduction Agency (DTRA) and the U.S. Strategic Command Center for Combating Weapons of Mass Destruction (SCC-WMD) requires transformational materials technology to support the intelligence, surveillance, and reconnaissance (ISR) of personnel and materials associated with weapons of mass destruction (WMD) development, manufacturing, and proliferation. Voxtel, Inc. proposes to fa ...

    SBIR Phase I 2013 Department of DefenseDefense Threat Reduction Agency
  6. Toughened Fabrics with Counter-WMD Functionality for Daily Wear

    SBC: LUNA INNOVATIONS INCORPORATED            Topic: DTRA122016

    Military personnel and first responders must be prepared to operate under the threat of a wide range of CBRNE threats (chemical, biological, radiological, nuclear, and high explosive) and rapidly counter WMD hazards. Daily-wear uniforms such as the army combat uniform (ACU) or the CWU-27/P flight suit are breathable and lightweight and provide basic abrasion and fire protection, but are not capab ...

    SBIR Phase I 2013 Department of DefenseDefense Threat Reduction Agency
  7. Dynamic Light Scattering Instrumentation Using Field Programmable Gate Array-based Digital Signal Processing

    SBC: VOXTEL, INC.            Topic: N/A

    An existing low-cost FPGA-based processing platform will be demonstrated with fiber-coupling to single-photon detectors, to perform photon-arrival time stamping with

    SBIR Phase I 2009 Department of CommerceNational Institute of Standards and Technology
  8. High Efficiency, Large-area, 1550 nm InGaAs Photodiodes

    SBC: VOXTEL, INC.            Topic: N/A

    A stable, well characterized InGaAs materials growth and photodetector fabrication process will be used to fabricate matched photodiodes optimized for balanced homodyne detection. The 1-mm-diameter p-i-n photodetectors will be manufactured back-illuminated with a 5-micron absorber, allowing residual light to reflect off the front-side metal to make a double pass through the active layer. Ultra-hig ...

    SBIR Phase I 2009 Department of CommerceNational Institute of Standards and Technology
  9. Efficient Low-Dark-Count Detector for Photon Counting

    SBC: VOXTEL, INC.            Topic: N/A

    Voxtel has demonstrated efficient high-speed photon counting with thresholded linear-mode avalanche photodiode (APD) receivers using multi-gain-stage InGaAs/InAIAs APDs. In contrast to Geiger APDs, thresholded photon-counting linear APD receivers are thought not to suffer afterpulsing, and can support maximum count rates (MCR) up to 2 or 3 orders of magnitude faster than Geiger APDs. However, the ...

    SBIR Phase II 2009 Department of CommerceNational Institute of Standards and Technology
  10. Abrasion protection, ballistic tolerance, and laser protection for windows/sensor on rotary wing aircraft.

    SBC: INTER MATERIALS, LLC            Topic: SOCOM07007

    Some of the US Army SOCOM greatest concerns are to maintain the helicopter pilot’s ability to see clearly and to provide helicopter windscreens with a greater degree of erosion/abrasion protection than what is being currently afforded. Recent developments on polymer coatings demonstrate the potential to meet and exceed all erosion/abrasion resistance and optical requirements by using plasma depo ...

    SBIR Phase II 2009 Department of DefenseSpecial Operations Command
US Flag An Official Website of the United States Government