Award Data

For best search results, use the search terms first and then apply the filters

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until September, 2020.

  1. Biological Decontamination for Forward-Deployed Airbase Using Low Temperature Air Plasmas

    SBC: ASI TECHNOLOGY CORP.            Topic: N/A

    "ASI's plasma consultant, Igor Alexeff, PhD, has invented, tested and patented an atmospheric pressure, dc of 60 Hz AC discharge, that has been operated in air, helium, argon and nitrogen. The apparatus has in laboratory testing successfully destroyedmicroorganisms. The apparatus does not require a complicated, fragile RF power supply for operation. We propose it to be developed into equipment for ...

    STTR Phase I 2002 Department of DefenseAir Force
  2. Electromagnetic Field Overexposure Indicator

    SBC: Beam Tech Corp.            Topic: N/A

    "There is a need for a personal radiofrequency radiation (RF) alarm that has the ability to detect high levels of electromagnetic field exposures, in both near and far-field situations, so that personnel can perform their duties without health hazards inenvironments mandated by DOD operations. This project will develop a small, inexpensive portable alarm to detect overexposures to RF electric and ...

    SBIR Phase II 2002 Department of DefenseAir Force
  3. Novel Concepts for Multi-Mission Radar

    SBC: CAE SOFT CORP.            Topic: N/A

    "CAE Soft Corporation proposes to develop a unified, simultaneous, and power efficient "Intense Moving Target Surveillance (IMTS)" airborne radar mode that exploits the complimentary aspects of individual SAR, GMTI, AMTI, and ATR modes enabled by usingshared aperture, shared energy approaches. The IMTS mode will have the ability to continuously and simultaneously detect, maintain track, and geo-l ...

    SBIR Phase I 2002 Department of DefenseAir Force
  4. Improved Composite Duct Design for Increased Safety Margin or Weight Reduction


    "Practical methodologies will be developed to efficiently design nonlinear composite ducts and panels with large anomalies and cutouts for buckling. The analysis system to be devised will be automated and integrated into the ANSYS finite element code usingits macro language capabilities, including optimization with parameterized shell and solid models of subject composite duct systems. Important f ...

    SBIR Phase I 2002 Department of DefenseAir Force
  5. Knowledge Based Data Monitoring for a Joint/Coalition Environment

    SBC: CYCORP, INC.            Topic: N/A

    "We propose to develop a knowledge based application for informationfusion and data monitoring. The Cyc Monitor will provide the end userwith the capability to seamlessly integrate multiple, semanticallyhetergenous data bases and knowledge sources within the Cyc knowledgebase, define high-level patterns, or concepts of interest, which mayappear directly or inferrentially among the disparate knowle ...

    SBIR Phase II 2002 Department of DefenseAir Force
  6. Rapid Laser Drilling and Inspection of Contoured Holes

    SBC: E. M. Optomechanical, Inc.            Topic: N/A

    "The Air Force's Airborne Laser System needs technology to rapidly produce high-quality 170-micron diameter contoured holes in quantities of millions. At a target rate of one hole per minute, a single production workstation running 24/7 would take 46 yearsto produce the number of holes required for a fully operational system consisting of seven aircraft. E. M. Optomechanical, Inc. is proposing a ...

    SBIR Phase I 2002 Department of DefenseAir Force
  7. Aircraft Wiring Inspection System

    SBC: E-Spectrum Technologies, Inc.            Topic: N/A

    "The technical feasibility of developing a viable non-intrusive portable aircraft wiring test system is examined. The application of the system is to provide examination and characterization of aircraft wiring harnesses, while also providing predictivedata analysis, health assessment, and identification of incipient failures. Of particular importance in this research is the heretofore untested ...

    SBIR Phase I 2002 Department of DefenseAir Force
  8. An Ultra-Compact Impulse Radiating Antenna for Space Applications

    SBC: FARR RESEARCH, INC.            Topic: N/A

    "Compact Ultra-Wideband (UWB) antennas with broad bandwidth could be of great use in a variety of space-based applications, including radar, communications, and surveillance. The challenge is to deploy a lightweight UWB antenna that is stowable in a smallvolume, that is automatically deployable, and that will be resistant to the harsh space environment. To overcome these challenges we propose an U ...

    SBIR Phase II 2002 Department of DefenseAir Force
  9. Artificial Dielectrics and Fresnel Lenses for High Power Microwave Applications

    SBC: FARR RESEARCH, INC.            Topic: N/A

    "Lens antennas with large apertures could be useful in a variety of High-Power Microwave (HPM) and Ultra-Wideband (UWB) applications. Such lenses are needed in the frequency range of 0.2-2 GHz, and they must have low loss and dispersion. Existing lensesmade of solid dielectric materials, such as polyethylene, are too dense and weigh too much to be practical for large apertures. To build a lightwei ...

    SBIR Phase I 2002 Department of DefenseAir Force

    SBC: Glolinuear Computer Systems, Inc.            Topic: N/A

    "This SBIR project will develop DMIMS, an innovative concept for C4I operations centers featuring our innovative technology for information capture, presentation and instant replay in real-time, near-real-time or from archives. It answers the need for aversatile high performance information processing capability in response to the ever-increasing supply of C4I information that must be processed. ...

    SBIR Phase I 2002 Department of DefenseAir Force
US Flag An Official Website of the United States Government