Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until September, 2020.

  1. Low Cost Transverse Rail Defect Detector

    SBC: WavesinSolids LLC            Topic: N/A

    Development of the basic EMAT-based transverse rail defect detector has progressed toward finished form, as envisioned in the original solicitation.  This modification is intended to produce a demonstrable version of a 2-rail detection system with automated signal interpertation.

    SBIR Phase II 2004 Department of Transportation
  2. Advanced Microcalorimeter Instrumentation for X-Ray Microanalysis

    SBC: STAR CRYOELECTRONICS LLC            Topic: N/A

    An innovative superconducting transition edge sensor (TES) microcalorimeter array with superconducting quantum interference device (SQUID) readouts is described for high energy and high spatial resolution X-ray energy dispersive spectroscopy and microanalysis. The proposed microcalorimeter instrument offers an energy resolution that is comparable to and potentially even better than wavelength disp ...

    SBIR Phase I 2004 Department of CommerceNational Institute of Standards and Technology
  3. High-Speed Dynamic 3D Surface Mapping System

    SBC: Conrad Technologies, Inc.            Topic: N/A

    Conrad Technologies, Inc. (CTI) proposes a non-contact, dynamic 3D position sensor based on optical triangulation using multiple radiating LED targets to measure intrusion of an automobile structure into the occupant compartment during full-scale crash tests. CTI has significant experience developing non-contact measurement instruments. CTI has developed a Motion Imaging and Tracking Acquisition ...

    SBIR Phase I 2002 Department of Transportation
  4. Evaluation of Composite Joints in General Aviation Structures

    SBC: Materials Sciences LLC            Topic: N/A

    During the Phase I program, MSC demonstrated a powerful new software tool designed for the analysis of bonded joints in General Aviation (GA) aircraft. The tool can handle the complex geometry and boundary conditions found in typical joints, and has been shown to be exceptionally accurate. An easy-to-use front end to the code was also demonstrated. In addition, Materials Sciences Corporation (M ...

    SBIR Phase II 2002 Department of Transportation
  5. Evaluation of Composite Joints in General Aviation Structures

    SBC: Materials Sciences LLC            Topic: N/A

    During the Phase I program, MSC demonstrated a powerful new software tool designed for the analysis of bonded joints in General Aviation (GA) aircraft. The tool can handle the complex geometry and boundary conditions found in typical joints, and has been shown to be exceptionally accurate. An easy-to-use front end to the code was also demonstrated. In addition, Materials Sciences Corporation (M ...

    SBIR Phase I 2002 Department of Transportation
  6. Innovative Multi-cellular Pultruded Composite Guardrail

    SBC: Creative Pultrusions, Inc            Topic: N/A

    N/A

    SBIR Phase I 2001 Department of Transportation
  7. Innovative Multi-cellular Pultruded Composite Guardrail

    SBC: Creative Pultrusions, Inc            Topic: N/A

    N/A

    SBIR Phase II 2001 Department of Transportation
  8. Video Detection and Image Processing Systems for Traffic Law Enforcement

    SBC: DIGITAL TRAFFIC SYSTEMS, INC.            Topic: N/A

    Digital Traffic Systems, Inc. has previously developed and sells commercially an Intelligent Camera System that interprets video images of the road traffic and computes traffic parameters including: Queue Length (Vehicle count), Flow Speed (miles per hour), Density (vehicles per mile), volume (vehicles per hour), Lane Occupancy (percent of lance occupied) and Headway (average distance| feet betwe ...

    SBIR Phase I 2001 Department of Transportation
  9. A Neural Network-based System for Automated Detection of Wire Insulation Chafing from TDR/FDR Data

    SBC: MANAGEMENT SCIENCES INC            Topic: N/A

    This proposal is to develop an automated system for identification and characterization of chafing in the aircraft wiring. Chafing degrades wiring integrity and can lead to shorts and/or damaged data pathways. Shorts have been associated with deadly in-flight fires. Damaged data pathways have caused engine shutdowns, loss of control, and other safety hazards. Currently recognizing and measurin ...

    SBIR Phase I 2001 Department of Transportation
  10. Evaluation of Composite Joints in General Aviation (GA) Structures (MSC P1S21-118)

    SBC: Materials Sciences LLC            Topic: N/A

    Simple, yet accurate engineering analytical tools will be developed for the evaluation of strength, durability and damage tolerance of composite bonded joints used in General Aviation (GA) structures with due consideration to adherend and adhesive thickness variations used (or present) in such joints. These tools and other available ones will be exercised for typical joint GA joint configurations ...

    SBIR Phase I 2001 Department of Transportation
US Flag An Official Website of the United States Government