Award Data

Autonomous Innovations Inc. (AII) proposes to develop a novel comprehensive monitoring system for motorcycles that will monitor vehicle miles traveled (VMT), as well as a varity of physical measurements, to understand the exposure and factors in the increased numbers of accidents among motorcycles riders. All has extensive experience in developing and integrating sensors and data-logging for a va ...

Cities must perform detailed assessments of sidewalks and streets, including curb ramps, pedestrian signals, crosswalks, street furniture, and other components to determine compliance with the Public Rights-of-Way Accessibility Guidelines. However, current assessment methods are inadequate or unreasonable due to time and resources required. The objectives of this project are to: 1) develop elect ...

This proposal describes the application of a mature nanotechnology-based crack arrest / structural repair technology as a novel crack arrestor tool for high-strength pipelines. The crack arrestor would comprise a thin layer or sleeve of electrodeposited nanocrystalline material applied to the outside of the pipe either in the coating mill during fabrication or in-field during or following constru ...

This proposal describes the application of a mature nanotechnology-based crack arrest/structural repair technology as a novel in-field pipeline repair tool. The repair would be comprised of a thin layer or sleeve of electrodeposited nancrystalline material applied to the damaged region of the pipe in order to utilize the "crack filling" characteristic of the process. The concept proposed has alr ...

Laser Technology Inc. (LTI) proposes a Phase II SBIR research project to further develop a Compact Shearography System, Analysis Method and Software for micro-crack detection in concrete. There is an urgent need to detect and characterize fine cracks in concrete that form because of various damage mechanisms including alkali-silicate reaction, delayed ettringite formation or frost damage. Fine s ...

Modern supercontinuum (SC) light sources are generated by non-linear interactions between ultrashort pulse lasers and optical fibers. Output in near-ultraviolet to near-infrared wavelength ranges has been demonstrated. These light sources have high brightness and are spatially coherent. Recently, output to 4.5 µm was achieved using fluoride glass fibers; optical absorption by the fiber prevents l ...

Southwest Sciences proposes development of residential fire sensing systems based on low cost optical imaging sensors combined with newly introduced highly miniaturized, low power CO sensors. Sensor modules will also include temperature sensors. The modules will be part of a low power wireless network. Each module will be about ½ the size of a business card, a few mm thick, and will operate for ...

A key factor of international efforts to identify and suppress the supply of and demand for nuclear materials, and thereby to deter potential traffickers, is the ability to accurately identify contradicted material and ultimately to trace it back to its origin. Alpha particle spectroscopy is widely used in nuclear forensics to assay trace quantities of sensitive nuclear materials, but the limited ...

Development of the basic EMAT based transverse rail defect detector has progressed toward finished form, as envisioned in the original solicitation. This modification is intended to produce a demonstratable version of a 2-rail detection system with automated signal interpertation. The objectives of this work are to: a. Further develop the system into a functioning 2-rail detection system, as ori ...

Conrad Technologies, Inc. (CTI) proposes a non-contact, dynamic 3D position sensor based on optical triangulation using multiple radiating LED targets to measure intrusion of an automobile structure into the occupant compartment during full-scale crash tests. CTI has significant experience developing non-contact measurement instruments. CTI has developed a Motion Imaging and Tracking Acquisition ...