Award Data

In Phase II, Daniel H. Wagner Associates will build a full-scale prototype Multi-Sensor Data Fusion System (MSDFS) using a modular approach to allow for a straightforward transition of the innovative MSDFS technologies into the DD(X)/Open Architecture Track Management (OATM) architecture and also into other Navy combat and command and control systems, especially Anti-Submarine Warfare (ASW) and To ...

Effective Naval warfare depends on accurate estimates of sensor performance in complex environments, which provides a force multiplier by allowing friendly forces to optimize their tactics while avoiding counterdetection. The shift in emphasis from open ocean to littoral operations has increased the demands on models of sonar performance because data must be sampled at an order-of-magnitude finer ...

REPAIR OF SHIPBOARD MACHINERY AND EQUIPMENT REQUIRES INFORMATION AND EXPERTISE NOT EASILY AVAILABLE TO SHIPBOARD MAINTENANCE PERSONNEL. WHAT INFORMATION THAT IS AVAILABLE IS GENERALLY EMBEDDED IN TECHNICAL MANUALS OR MAINTENANCE/REPAIR CARDS THAT ARE DIFFICULT TO DECIPHER, BULKY, AND SOMETIMES HARD TO MAINTAIN. A SYSTEM THAT ALLOWED FOR IMPROVED MAINTENANCE AIDING AND GUIDANCE TO NON-EXPERTS WOULD ...

This proposal addresses the development and use of lightweight, low thermal-capacity reformable tooling materials for high-temperature composite processing evaluation, parts prototyping, trial production and full-rate production of PMC engine components. The weight-saving promise of high-temperature polymer matrix composites (PMCs) for engine components is offset by the very high costs of parts m ...

"ACIT has studied a remotely addressed strain detection system consisting of a passive embedded sensor and a handheld detector, used in either a stationary or portable mode. This Proposal will demonstrate the utility of the strain detection system forspecific advanced composite materials used in aerospace vehicles, fulfilling a critical need to assess the mission capability of advanced composites ...

"A study is proposed in which the performance of an underwater acoustic vector sensor (AVS) containing conventional piezoelectric transducers is compared with that of an AVS containing single crystal piezoelectric transducers. An acoustic vector sensor isa device that measures three orthogonal components of the acoustic particle velocity in conjunction with the acoustic pressure at a single point ...

"Acoustech proposes a Phase I study to develop an acoustic dyadic sensor using piezoelectric single crystals. The study combines theoretical and numerical modeling along with experimental data obtained from a pre-prototype unit to assess the feasibility ofdeveloping a full scale unit during Phase II for a surveillance application. Greater sensor directivity in a comparable or smaller sized packag ...

THE OBJECTIVES OF PHASE I ARE TO DETERMINE HOW WELL THE SMALL SCALE TESTS CURRENTLY USED FOR SCREENING EXPLOSIVES, AND THE MODELS THAT DESCRIBE EXPLOSIVE BEHAVIOR IN THE SMALL SCALE TEST AND IN THE FULL SCALE MUNITION, CAN PREDICT THRESHOLDS OF EXPLOSIVE REACTION IN THE OPERATIONAL FULL SCALE MUNITION. FULL SCALE MUNITIONS WILL BE STUDIED TO DETERMINE THE CRITICAL MODE(S) OF EXPLOSIVE REACTION THA ...

THE PROBLEM IS TO DEVELOP SHALLOW DEPTH ROTATING BANDS FOR HIGH VELOCITY PROJECTILES THAT WILL MINIMIZE BARREL EROSION AND REDUCE DRAG TO AN ABSOLUTE MINIMUM, USING INEXPENSIVE METHODS OF RETAINING INJECTION-MOLDABLE THERMOPLASTIC MATERIALS. THE PROPOSED APPROACH IS TO TRADE OFF STRONGLY-RETAINED LOW DRAG ROTATING BANDS AGAINST BARREL EXIT-SEPARATING BANDS THAT ARE ASSISTED IN RETENTION INSIDE THE ...

This project will investigate candidate space-time coding schemes to be incorporated in a multiple-input multiple output two-way communication system that operates within an urban warfare environment. The main objective is to increase channel capacity to achieve high-quality video transmission using narrow signal bandwidths, typically deployed for voice channels. The investigation will determine t ...