You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
High-Speed Dynamic 3D Surface Mapping System
SBC: Conrad Technologies, Inc. Topic: N/AConrad Technologies, Inc. (CTI) proposes a non-contact, dynamic 3D position sensor based on optical triangulation using multiple radiating LED targets to measure intrusion of an automobile structure into the occupant compartment during full-scale crash tests. CTI has significant experience developing non-contact measurement instruments. CTI has developed a Motion Imaging and Tracking Acquisition ...
SBIR Phase I 2002 Department of Transportation -
Evaluation of Composite Joints in General Aviation Structures
SBC: MATERIALS SCIENCES LLC Topic: N/ADuring the Phase I program, MSC demonstrated a powerful new software tool designed for the analysis of bonded joints in General Aviation (GA) aircraft. The tool can handle the complex geometry and boundary conditions found in typical joints, and has been shown to be exceptionally accurate. An easy-to-use front end to the code was also demonstrated. In addition, Materials Sciences Corporation (M ...
SBIR Phase II 2002 Department of Transportation -
Evaluation of Composite Joints in General Aviation Structures
SBC: MATERIALS SCIENCES LLC Topic: N/ADuring the Phase I program, MSC demonstrated a powerful new software tool designed for the analysis of bonded joints in General Aviation (GA) aircraft. The tool can handle the complex geometry and boundary conditions found in typical joints, and has been shown to be exceptionally accurate. An easy-to-use front end to the code was also demonstrated. In addition, Materials Sciences Corporation (M ...
SBIR Phase I 2002 Department of Transportation -
Innovative Multi-cellular Pultruded Composite Guardrail
SBC: Creative Pultrusions, Inc Topic: N/AN/A
SBIR Phase I 2001 Department of Transportation -
Innovative Multi-cellular Pultruded Composite Guardrail
SBC: Creative Pultrusions, Inc Topic: N/AN/A
SBIR Phase II 2001 Department of Transportation -
Evaluation of Composite Joints in General Aviation (GA) Structures (MSC P1S21-118)
SBC: MATERIALS SCIENCES LLC Topic: N/ASimple, yet accurate engineering analytical tools will be developed for the evaluation of strength, durability and damage tolerance of composite bonded joints used in General Aviation (GA) structures with due consideration to adherend and adhesive thickness variations used (or present) in such joints. These tools and other available ones will be exercised for typical joint GA joint configurations ...
SBIR Phase I 2001 Department of Transportation -
Calibration of an Autonomous Navigation System Using GPS and Machine Learning
SBC: Sierra Nevada Corporation Topic: N/AGPS receivers are heavily used in aviation for both visual and instrument flights. There is a need for a backup system so that enroute and non-precision approaches can be flown without reliance on ground based systems should GPS be unavailable. We propose to use barometric pressure, airspeed, low-cost inertial sensors, three-axis magnetometer along with high-fidelity geomagnetic models, and an ...
SBIR Phase I 2001 Department of Transportation -
INTELLIGENT EMERGENCY MEDICAL SERVICES SYSTEM SIMULATION- IEMS(3)
SBC: Data Communications Corp. Topic: N/ATHE PURPOSE OF THIS RESEARCH PROJECT IS TO DETERMINE THE FEASIBILITY OF MERGING AN EMERGENCY MEDICAL SERVICES (EMS) SIMULATOR WITH GEOGRAPHICAL INFORMATION SYSTEMS (GIS) IN ORDER TO PRODUCE IEMS(3) (INTELLIGENT EMERGENCY MEDICAL SERVICES SYSTEMS SIMULATOR), A PC-BASED SYSTEM WHICH CAN BE USED FOR BOTH ADDRESSING STRATEGIC PLANNING ISSUES OF EMS SYSTEMS (E.G., SYSTEM CONFIGURATION; VEHICLE LOCATION ...
SBIR Phase I 1994 Department of Transportation -
ADVANCED MATERIAL CONCEPTS FOR GUARDRAIL END TREATMENTS
SBC: United Dynamics, Inc. Topic: N/AGUARDRAIL TERMINALS ARE SOME OF THE MORE TROUBLESOME AND POTENTIALLY HAZARDOUS ROADSIDE APPURTENANCES. RECENTLY DEVELOPED TERMINAL CONCEPTS WHICH HAVE PASSED CURRENT CRASH TEST CRITERIA TEND TO BE EXPENSIVE AND MAY REQUIRE EXCESSIVE LENGTH OF NEED, FLARE-OUT SPACE AND ADDITIONAL FILL AND GRADING. THIS PHASE I SBIR PROPOSAL ADDRESSES THE DEVELOPMENT OF A MORE EFFICIENT ENERGY ABSORBING TERMINAL CON ...
SBIR Phase II 1994 Department of Transportation -
X-RAY DAMAGE THRESHOLD FOR FILM AND MAGNETIC RECORDING MEDIA
SBC: United Dynamics, Inc. Topic: N/ATHE FEDERAL AVIATION ADMINISTRATION NEEDS STATISTICAL DATA ON THE X-RAY DAMAGE THRESHOLD OF PHOTOGRAPHIC FILM AND MAGNETIC MEDIA TO PREDICT POSSIBLE DAMAGING EFFECT OF HIGHER POWERED X-RAY FACILITIES BEING CONSIDERED AS PART OF INCREASED AIRPORT SECURITY. TECHNOLOGY DEVELOPMENT ASSOCIATES, INC. (TDA) PROPOSES AN EXPERIMENTAL PROGRAM TO STATISTICALLY EVALUATE DAMAGE THRESHOLDS. X-RAY TRANSPORT ANAL ...
SBIR Phase I 1994 Department of Transportation