Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Advanced Mechanical Testing System for Highly Irradiated Materials

    SBC: Product Innovation And Engineering, LLC            Topic: 32a

    This project will research and develop an Advanced Mechanical Test (AMT) system to perform comprehensive, high throughput, automatic mechanical characterization using miniature tensile specimens for highly irradiated materials. The solution should aid in a dramatic reduction of irradiated material waste, remote operation within hot cell environments, and stochastic characterization. It can also be ...

    STTR Phase II 2019 Department of Energy
  2. Low-cost, multi-spectral treatment for exo-atmospheric ballistic targets

    SBC: Synectic Research And Analysis, Inc.            Topic: MDA04T023

    This Phase II effort demonstrates the feasibility of integrating a chemically powered or “active” infrared (IR) treatment into an inflatable device and then perform three experimental excursions with the hardware: 1) achieve a tunable IR signature by cooling the surface; 2) achieve tunable IR emissions combined with a predetermined and fixed radar cross section (RCS); and 3) achieve both varia ...

    STTR Phase II 2005 Department of DefenseMissile Defense Agency
  3. Hadamard Transform Time-of-Flight Mass Spectrometry

    SBC: Southwest Sciences, Inc.            Topic: AF03T003

    This Phase II STTR research project is designed to further develop a mass spectrometry technology employing Hadamard Transform (HT) multiplexing techniques with the goal of developing a relatively simple, linear, rugged, HT time-of-flight (HT-TOF) mass spectrometer that offers high sensitivity and rapid mass spectra storage rates. Southwest Sciences and Stanford University will focus their effor ...

    STTR Phase II 2005 Department of DefenseAir Force
  4. Computationally Efficient, Accurate and Uncertainty Characterized Chemical Kinetics for Hydrocarbon Fuels

    SBC: CFD Research Corporation            Topic: AF17AT004

    High-pressure turbulent combustion occurs in many combustion devices critical to the Air Force. Notwithstanding significant progress in computational modeling of these devices; several challenges have remained. A fundamental challenge is identification of reaction pathways and reactions in small molecule foundational chemical kinetics requiring improvements under these high-pressure turbulent cond ...

    STTR Phase II 2019 Department of DefenseAir Force
  5. Verification and Validation of Algorithms for Resilient Complex Software Controlled Systems

    SBC: XL Scientific, LLC            Topic: AF17CT05

    This effort seeks verification tools and techniques to ensure safety and stability of spacecraft Guidance, Navigation, and Control (GN&C) algorithms, particularly the attitude control system integrated with autonomy software. Advanced control algorithms and autonomy are increasingly necessary to enable responsiveness of fleets of vehicles to attitude constraints and object avoidance. Verus Researc ...

    STTR Phase II 2019 Department of DefenseAir Force
  6. Damage Morphology for Advanced Concretes

    SBC: Dynamic Systems And Research Corporation            Topic: AF18AT012

    The development and implementation of new damage morphology models for concrete materials is critical to understanding their dynamic behavior during severe shock loading environments.Current constitutive models of conventional strength concretes do not accurately represent the behavioral characteristics of new ultra-high strength concretes because of differences in damage mechanisms during failure ...

    STTR Phase II 2019 Department of DefenseAir Force
  7. Shear Stress Sensor Using Shape Memory Films

    SBC: DOMINCA LLC            Topic: AF03T010

    There is a need for a low profile, simple, accurate, localized, responsive sensor to measure shear stress in fluid flow. The unusual properties of shape memory alloys, and of Ni2MnGa in particular, suggest they could be sensing elements for shear. In recent years, single crystal films of Ni2MnGa have been grown by Molecular Beam Epitaxy (MBE). Once released from their substrate, these films hav ...

    STTR Phase II 2005 Department of DefenseAir Force
  8. High-Performance Activewear and Workwear made from Virgin and Recycled Cotton

    SBC: CFD Research Corporation            Topic: A152092

    Pulse voltammetry techniques, coupled with model-based analysis tools, provide a number of advantages for quantitative analysis of electrochemically active materials that govern the performance of batteries and fuel cells.In prior Phase I and II researc

    STTR Phase II 2019 Department of DefenseArmy
  9. High Energy Density Capacitors for Navy Pulse Power Applications

    SBC: TPL, INC.            Topic: N03T007

    Advanced power systems for Future Naval Capability depend on capacitor banks as the first stage of pulsed power. Significant electrical energy is necessary to support a range of applications including electromagnetic armor, electromagnetic gun and electro-mechanical aircraft launch systems. It is anticipated that each electric ship will require up to one trillion joules of capacitor energy. Adv ...

    STTR Phase II 2005 Department of DefenseNavy
  10. Adaptive Laser Beam Control Using Return Photon Statistics

    SBC: Nukove Scientific Consulting, Llc            Topic: AF03T009

    During a Phase I STTR Contract #F49620-03-C-0064 provided by AFOSR, Nukove Scientific Consulting addressed “Adaptive Laser Beam Control Using Return Photon Statistics” with considerable success. The Nukove/NMSU Team demonstrated the feasibility of combining Nukove’s statistical approaches to pointing estimation and target identification with a laboratory testbed at NMSU. This proposed Phase ...

    STTR Phase II 2005 Department of DefenseAir Force
US Flag An Official Website of the United States Government