Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Low-cost, multi-spectral treatment for exo-atmospheric ballistic targets

    SBC: Synectic Research And Analysis, Inc.            Topic: MDA04T023

    This Phase II effort demonstrates the feasibility of integrating a chemically powered or “active” infrared (IR) treatment into an inflatable device and then perform three experimental excursions with the hardware: 1) achieve a tunable IR signature by cooling the surface; 2) achieve tunable IR emissions combined with a predetermined and fixed radar cross section (RCS); and 3) achieve both varia ...

    STTR Phase II 2005 Department of DefenseMissile Defense Agency
  2. Viscous Cartesian Flow Solver with AMR Capabilities for Automated Flow Simulation

    SBC: CFD Research Corporation            Topic: N08T008

    The goal of this project is to develop and leverage the novel Normal Ray Refinement (NRR) methodology investigated in Phase I, and to apply it to an efficient and robust prototype adaptive Cartesian solver for automated simulations of viscous flows. The NRR approach will provide a substantial reduction in the number of grid points in viscous boundary layers and will employ adaptive normal ray plac ...

    STTR Phase II 2009 Department of DefenseNavy
  3. Analysis & Adaptation of Advanced Fischer Tropsch Catalyst Structures and Resulting BOP Reductions to Fulfill Future Navy Fuel Needs

    SBC: INTRAMICRON INC            Topic: N07T027

    In the Phase I study, IntraMicron found that Microfibrous Entrapped Catalysts (MFEC) increased effective thermal conductivity by 3~12 times, improved selectivity and product yield, and significantly reduced the Balance of Plant (BOP) compared with packed beds; Ceramatec prepared novel catalysts for highly selective jet fuel production and designed a FTS modular reactor with fast external heat tran ...

    STTR Phase II 2009 Department of DefenseNavy
  4. An Integrated Optimization System for Lightening the Load of Warfighters

    SBC: CFD Research Corporation            Topic: N08T019

    Warfighters rely on technological equipment to ensure safety, mission effectiveness, and situational awareness. This equipment increases the capabilities of warfighters but also adds to their weight burden. This excess load could cause significant stress on the musculoskeletal system and lead to physiological deficits. The overall objective of the proposed project is to develop a system-level opti ...

    STTR Phase II 2009 Department of DefenseNavy
  5. Extreme Phase Change Materials for Soldier Microclimate Regulation

    SBC: Renewable Alternatives, LLC            Topic: A05T012

    Microclimate systems are being developed to minimize the effects of extreme temperature on performance capability and enable functioning under conditions that would otherwise cause incapacitation. It is important that these systems be highly reliable, lightweight and durable, with the intention to be worn under armor materials, heavy chemical/biological protective suits, and other protective cloth ...

    STTR Phase I 2005 Department of DefenseArmy
  6. Development of a Portable Breath Analysis System Based on a Novel Electronic Nose Microsensor

    SBC: Streamline Automation, LLC            Topic: AF04T017

    Significant recent research has shown that breath biomarkers are excellent indicators of oxidative stress caused by conditions ranging from radiation exposure to COPD. Current techniques for collection, concentration, and analysis of exhaled breath do not support real-time analysis, or require complex and bulky equipment. Streamline Automation, LLC will develop a portable Breath BioDetector in p ...

    STTR Phase I 2005 Department of DefenseAir Force
  7. Computational Design Tool for the Synthesis and Optimization of Gel Formulations (SOGeF)

    SBC: CFD Research Corporation            Topic: A05T003

    Gel propulsion systems combine the best characteristics of solid and liquid propellants. The gel system stores like solid propellant, but flows like a liquid when pressurized, enabling throttle and restart capability similar to liquid propellants. An enabling technology for the further advancement of gelled propulsion is the development of tools to render the development of propellant formulation ...

    STTR Phase I 2005 Department of DefenseArmy
  8. Software for the Design and Certification of Unitized Airframe Components

    SBC: Engineering Software Research And Development, Inc.            Topic: AF05T015

    An investigation of the feasibility of commercialization of the results developed in the Center for Computational Mechanics, Washington University, St. Louis, Missouri under AFOSR Grant No. F49620-01-1-0074 entitled; "Mathematical and Computational Framework for a Virtual Fabrication Environment for Aircraft Components". The proposed project will address some of the key requirements identified in ...

    STTR Phase I 2005 Department of DefenseAir Force
  9. Matched and Ultra-Low CTE Optical Materials

    SBC: GATR Technologies, Inc.            Topic: MDA05T021

    A new material and processing technology is proposed that will dramatically reduce the cost of manufacturing lightweight mirrors for optical test applications. Such precision mirrors are also required for surveillance, directed energy, and DoD-sponsored space programs. There is a significant amount of research devoted to developing materials and processes for space-born mirrors and ground test use ...

    STTR Phase I 2005 Department of DefenseMissile Defense Agency
  10. Image/Model Based System for Optimized Helmet Design

    SBC: CFD Research Corporation            Topic: A05T030

    Military helmets are designed based on costly and time consuming laboratory ballistic tests, firing range, and forensic data. Until now advanced medical imaging and computational modeling tools have not been adequately utilized in the design and optimization of military helmets. The overall objective of this project is to develop 3D medical imaging techniques for the brain ballistic injury model a ...

    STTR Phase I 2005 Department of DefenseArmy
US Flag An Official Website of the United States Government