List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Innovative Techniques for Missile Defense- Proportional Hot Gas Actuator for DACS

    SBC: APPLIED THERMAL SCIENCES            Topic: MDA04020

    A key component of missile interceptor vehicles is the divert and attitude control system (DACS), which is responsible for maneuvering the interceptor vehicle to its target. A vital component to the DACS is the thruster, which provides effective control of vehicle divert. Solid propellant DACS thrusters employ an adjustable pintle for controlling the thrust level. Movement of the pintle for smo ...

    SBIR Phase II 2005 Department of DefenseMissile Defense Agency
  2. Development of Zinc Sulfide Seeker Window Material

    SBC: VICUS TECHNOLOGIES, LLC            Topic: MDA04053

    Ground based interceptors can benefit significantly from the use of a dual color focal planes and wideband seekers for improved target acquisition and target discrimination. Zinc sulfide has been under evaluation as a replacement window for the THAAD seeker system to replace the current sapphire window. Zinc sulfide presents a wideband capability and will result in a significant system cost reduct ...

    SBIR Phase II 2005 Department of DefenseMissile Defense Agency
  3. Miniaturized, Low Weight, Low Cost Interceptor Components for the Miniature Kill Vehicle (MKV)

    SBC: VICUS TECHNOLOGIES, LLC            Topic: MDA04009

    Advanced defensive interceptor systems require a source of power to operate target acquisition, seeker, and divert propulsion systems. As kill vehicle sizes continue to contract, novel power systems are required to minimize weight and of equal importance, to minimize volume. A conformal Ultracapacitor Power Storage Device has been demonstrated in Phase I that provides an energy density approaching ...

    SBIR Phase II 2005 Department of DefenseMissile Defense Agency
  4. Modular Mission Planning Toolkit (MMPT)

    SBC: Technology Systems Inc.            Topic: N05080

    TSI proposes to develop a mission planner that will be adaptable to AUVs currently planned to be integrated into the fleet over the next 3 years, be able to receive environmental data from Navy libraries (such as DIOPS), and optimize AUV missions as a result of the environmental data received. The mission planner will be able to coordinate the use of multiple AUVs to optimize environmental data c ...

    SBIR Phase I 2005 Department of DefenseNavy
  5. Design Development of an Advanced Composite Interceptor Nosecone for KEI

    SBC: Fiber Materials, Inc.            Topic: MDA04111

    The proposed nosecone development effort will investigate application of the following component technologies to a ground base interceptor deployable nosecone for KEI: [1] an advanced ceramic resin matrix for the thermal protection system, [2] a low-shock nosecone separation system, [3] a lightweight composite assembly configuration and [4] integration of lightning/EMI shielding into the composite ...

    SBIR Phase I 2005 Department of DefenseMissile Defense Agency
  6. Multi-Dimensional Reinforced Ceramic Matrix Composite Application to Advanced Pintle Operated DACS Systems

    SBC: Fiber Materials, Inc.            Topic: MDA04111

    This program proposes to investigate and demonstrate novel composite material concepts for advanced divert and attitude control solid propulsion systems. Fiber Materials Inc. (FMI) teamed with ATK Elkton LLC, proposes to develop multi-directional reinforced ceramic matrix composite (CMC) material applicable to ATK's Block II SDACS, KEI, MKV, advanced PBCS and advanced Patriot reaction control sys ...

    SBIR Phase I 2005 Department of DefenseMissile Defense Agency
  7. Development of Durable, Fiber-Reinforced Refractory Composites for Thermal Protection Systems (TPSs)

    SBC: Fiber Materials, Inc.            Topic: AF05137

    Next-generation endo/exoatmospheric hypersonic vehicles require durable thermal protection systems (TPSs) for leading edges, control surfaces and skin acreage that are resistant to impact damage. Fiber Materials Inc. (FMI) proposes a multidirectional fiber reinforced C/C-SiC TPS that demonstrates high impact durability for both low and high velocity debris. FMI's multidirectional C/C-SiC outer s ...

    SBIR Phase I 2005 Department of DefenseAir Force
  8. Innovative Thermal Protection Systems (TPSs) for Trajectory Shaping Vehicles (TSVs)

    SBC: INTERMAT            Topic: AF05143

    Advanced reentry vehicles desire extended time durations in oxidizing environments, at temperatures in the range of 3000°K. State of the art nosetip materials utilize a high density carbon/carbon (C/C) composite that has a carbide center core. This attribute results in maintenance of the aerodynamic shape of the nosetip for the vehicle. Intermat has produced nosetip billets with a variety of `c ...

    SBIR Phase I 2005 Department of DefenseAir Force
  9. Integrated Missile Harness-Fairing Assembly

    SBC: Fiber Materials, Inc.            Topic: MDA04111

    A need exists for a state-of-the-art electrical interconnection assembly that will simplify missile manufacture and assembly at a reduced cost relative to current methods. It should provide thermal protection, facilitate internal individual EMI shielding from each bundle type as well as external sources, and minimize the harness-fairing profile reducing aerodynamic forces. Fiber Materials, Inc. ( ...

    SBIR Phase I 2005 Department of DefenseMissile Defense Agency
  10. Hybrid Textile-Based Multi-Layered Flexible System for Penetration Resistance

    SBC: Tex Tech Industries Inc.            Topic: A05T004

    Tex Tech Industries has an effective through thickness reinforced hybrid ballistic fabric that has recently been introduced into the ballistic armor market for police force body armor. Fabric made with this technology was tested for V-50 results using both 9mm projectiles (124g Full Metal jacket) and .22 caliber fragment simulation projectiles( FSP, 17 grain). Result from this testing demonstrate ...

    STTR Phase I 2005 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government