List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Enabling Materials Processing Technology for Low-Cost Fabrication of Integral Bladed Rotors (IBR)

    SBC: THIRD WAVE SYSTEMS, INC.            Topic: AF04140

    Integral bladed rotors (IBR) manufacturing is an essential part of gas turbine fabrication for modern fighter aircraft. Stringent dimensional tolerance and surface finish requirements necessitate precision manufacturing and consequently, resulting in increased cost. Our Phase II proposal will demonstrate innovative high speed machining (HSM) technologies the Air Force needs for affordable fabrica ...

    SBIR Phase II 2005 Department of DefenseAir Force
  2. Magnetic Sensors for Submarine Detection

    SBC: NVE CORP. (FORMERLY NONVOLATILE ELECTRONICS, INC.            Topic: SB031023

    An anti-submarine warfare concept is proposed in which a low-cost and easily-deployable temporary submarine detection zone is created in littoral waters. The concept uses solid-state magnetic field sensors to detect the passage of submarines, and acoustic transmitters to relay the data to a small number of in-water receiver units. The data is then communicated from these units to a manned off-sit ...

    SBIR Phase II 2005 Department of DefenseDefense Advanced Research Projects Agency
  3. High-Speed Machining of Thin-Web, Large-Pocket Ti-6Al-4V Firewalls/Bulkheads

    SBC: THIRD WAVE SYSTEMS, INC.            Topic: N04013

    The overall goal of our Phase II project is to demonstrate innovative, scalable high-performance machining (HPM) processes the Navy needs for thin-web, large-pocket Ti-6Al-4V firewalls and bulkheads. The anticipated benefits of the program are the ability to fabricate unitized structures resulting in reduced labor costs, part count and improved quality while achieving desired weight requirements a ...

    SBIR Phase II 2005 Department of DefenseNavy
  4. Quantitative In-Situ TEM Nanoindentation Instrument

    SBC: HYSITRON, INCORPORATED            Topic: 30b

    75333S Nanoindentation is the primary technique for assessing the nanomechanical behavior of small volumes of materials. With this technique, the force required to produce a given displacement into a sample by a sharp diamond tip is measured, and the hardness of the material being tested is determined analyzing the force-displacement curve. However, the microstructural origins of the measured me ...

    SBIR Phase II 2005 Department of Energy
  5. A Tool for the Simulation of Thermal and Chemical Effects on Turbine Engine Component Parts

    SBC: Computherm, LLC            Topic: AF04155

    CompuTherm proposes to develop a tool which will enable the simulation of thermal and chemical effects on turbine engine component parts made of Alloy 718 during heat treatment and service. The proposed innovative tool will include a thermodynamic database which covers all the phases for Alloy 718 and a software package which integrates both thermodynamic and kinetic models. The tool can be used t ...

    SBIR Phase II 2005 Department of DefenseAir Force
  6. In-Harbor/At-Sea Ship Defense with Terahertz Sensors

    SBC: VDW DESIGN, LLC            Topic: N04065

    The Phase II component of this project will scale from the gigahertz to the terahertz regime the new antennas, pulse generators, detectors and modulation concepts modeled and demonstrated in Phase I. Phase II efforts will focus on arrays for generating and detecting broadband radiation from 50 GHz to above 0.5 THz (where atmospheric absorption is minimized) for sensing concealed threats. Portabili ...

    SBIR Phase II 2005 Department of DefenseNavy
  7. Wiring System In-Situ Health Monitoring Diagnostics

    SBC: MINNESOTA WIRE & CABLE COMPANY            Topic: AF04153

    Maintaining wire integrity of aging aircraft is an immense effort and cost for the military and commercial airlines. The Navy is reported to spend 1.8 million maintenance hours annually trouble shooting and repairing aircraft wiring. The development of an in-situ wire fault location system is critical to the solution to reduce cost, minimize downtime and improve safety. A key component of this sys ...

    SBIR Phase II 2005 Department of DefenseAir Force
  8. Computer-Aided Design and Optimization of High Performance Vacuum Electronic Devices

    SBC: SIMULATION TECHNOLOGY & APPLIED RESEARCH, INC.            Topic: N04113

    High-performance vacuum electron devices, such as microwave tubes, are widely used in military electronic battle-space systems. These devices are found in radar, communications, remote sensing, and navigation systems, where they provide an efficient and reliable source of microwave power. The pivotal role of microwave tubes in many on-board systems makes them a natural choice for careful optimiza ...

    SBIR Phase II 2005 Department of DefenseNavy
  9. Noninvasive Treatment of Hemorrhagic Shock

    SBC: ADVANCED CIRCULATORY SYSTEMS, INC.            Topic: A03178

    Shock secondary to acute blood loss remains the number one cause of death for our soldiers. Furthermore, heat shock and dehydration remain a common cause of cardiovascular collapse for our military personnel, especially as operations move increasingly into desert combat. The main objective of this proposal is to continue the development of the inspiratory impedance threshold device (ITD); an opera ...

    SBIR Phase II 2005 Department of DefenseArmy
  10. ZnO Based Light Emitters for UV/Blue Applications

    SBC: SVT ASSOCIATES, INCORPORATED            Topic: A04068

    This Phase II SBIR project addresses the development of novel solid state Zinc Oxide-based light emitting device. These devices will find widespread application in civilian and military markets. The objective of the Phase II is to develop UV/Blue emitters using the CdZnO/ZnO material system. SVT Associates utilize innovative approaches for material epitaxial growth p-type doping and device design. ...

    SBIR Phase II 2005 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government