You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Low-Cost, Full-Field, Surface Profiling Tool for Mechanical Damage Evaluation

    SBC: INTELLIGENT OPTICAL SYSTEMS, INC.            Topic: 091PH1

    Mechanical damage (typically from third party excavations) is the most frequent source of leaks and ruptures in pipelines. The most common type of mechanical damage is dents, sometimes associated with secondary features such as gouges, external corrosion, or cracks. Currently used techniques for assessing dents are not accurate enough for reliable determination of fitness for service. In this p ...

    SBIR Phase I 2009 Department of Transportation
  2. Integrated Risk Management and Quality Assurance

    SBC: Accident Prevention Group            Topic: N/A

    N/A

    SBIR Phase I 1995 Nuclear Regulatory Commission
  3. Open Document Word Processor Systems

    SBC: Adams Consulting Services            Topic: N/A

    The ISO Format Open Document standards 11, 26 and 36 describe a language for standard word processor systems. To implement such a system there are a number of challenges to overcome. The challenge of reusing logical constituent parts of a document and the difficulty of constructing a viable user interface are addressed in the research work proposed below. In addition the research will address t ...

    SBIR Phase I 1995 Department of Commerce
  4. Diagnostic Development for Characterizing Fuel Droplet Temperatures in Spray Flames

    SBC: Aerometrics Inc.            Topic: N/A

    N/A

    SBIR Phase I 1995 Department of Commerce
  5. Nanoparticle Characterization in Fluid by Resonant Mass Measurement

    SBC: Affinity Biosensors, LLC            Topic: N/A

    This project will extend the microchannel resonator to the level of a few attograms, which will allow measurement of individual particles as small as 10 nanometers with unprecedented resolution. The Phase I effort will prove the feasibility of this approach by miniaturizing the MEMS sensors, thereby improving their intrinsic mass sensitivity up to 100-fold; and by simultaneously measuring the sens ...

    SBIR Phase I 2009 Department of CommerceNational Institute of Standards and Technology
  6. X-Ray Spectrogram Film Densitometer

    SBC: APREND TECHNOLOGY            Topic: N/A

    The increased emphasis on mass screening for early detection of cancer has created a demand for effective quality assurance of medical radiography equipment. This is particularly true in mammography where indications of cancer are subtle and the image quality varies strongly with the x-ray technique used for the examination. Many studies clearly indicate that well calibrated and aligned equipmen ...

    SBIR Phase I 1995 Department of Commerce
  7. Scanning Head Storage Phosphor Plate Scanner

    SBC: APREND TECHNOLOGY            Topic: N/A

    N/A

    SBIR Phase I 1995 Department of Commerce
  8. Frequency Stable Optically Pumped Semiconductor Lasers

    SBC: Arete Associates            Topic: N/A

    Technology research and development in such areas as next-generation atomic clocks, quantum information processing with trapped ions, and atomic spectroscopy is impeded by the lack of commercially available laser sources that meet the required specifications of wavelength tuning range, output power, frequency-stability and reliability. Arete Associates is developing frequency-stable Optically Pump ...

    SBIR Phase II 2009 Department of CommerceNational Institute of Standards and Technology
  9. Development of Pulse/DC Characterization System for LEDs

    SBC: Arroyo Instruments, LLC            Topic: N/A

    The purpose of this project is to implement the process for a new method for the measurement of LED performance, but in a form that is low-cost, integrated, and easy-to-use, so that the barrier to entry is as low as is possible.

    SBIR Phase I 2009 Department of CommerceNational Institute of Standards and Technology
  10. "Aircraft Probabilistic Risk Assessment Methodology (APRAM)"

    SBC: ASCA, INC.            Topic: N/A

    N/A

    SBIR Phase I 1995 Department of Transportation
US Flag An Official Website of the United States Government