Award Data

Under our Phase I SBIR effort, and also under a complementary Arete Associates IR&D-funded airborne program, Areté successfully defined and performed preliminary airborne, long-standoff, demonstration of critical elements of novel, passive, multi-view, multi-channel algorithms for performing FOPEN against targets highly occluded by foliage. During Phase II, through the Phase II option, Arete prop ...

A need exists for economical, high capacity softwre to aid medical and engineering researchers to more easily and consistently calculate forces acting on vehicle occupants during real-world crashes. One example of such research is NHTSA's Crash Injury research and Engineering Network (CIREN), which in adition to collecting injury and vehicle information, has increasing access to data from Event D ...

This SBIR Phase I proposal to FHWA requests support for Elliott Technologies, Inc. to demonstrate the feasibility of using a handheld device or a single board computer to verify a simple interface between a user and simulated Safety Warning System messages, Simulated dedicated short range communications, and simulated High accuracy nationwide differential GPS. The significance of this proposal wi ...

FBS, Inc. proposes to establish the feasibility of an ultrasonically based device for in-situ evaluation of pipeline coatings and for the archiving of coating properties. Based on our experience gained through DOT and EPRI sponsored work on long range ultrasonics, buried pipes, and tar coated pipes we recognize the need for coating characterization not only as an important factor for inspection d ...

Intelligent Automation, Inc. and Oak Ridge National Lab is proposing a novel and integrated approach to inspect mechanical damages in the pipelines with or without coatings. It extends our successful work in a previous phase 1 project that combines the state of the art Shear Horizontal wave signal processing and pattern classification techniques, to detect and characterize the mechanical dents in ...

Laser Technology Inc. has demonstrated for the first time, the detection of non-visible cracks of less than 10 microns soon after casting of high performance concrete test prisms. Fine cracks may be associated with the two leading causes of concrete deterioration, delayed ettringite formation and alkali-silica reaction. Laser Technology is a leading developer, manufacturere and provider of laser ...

In line with the DOT's desire to encourage the development of a wireless brake shoe force measurement system, Mide will use its extensive experience on loadcell design, energy power-harvesting and wireless data transmission to develop an accurate system for the self-powered, wireless measurement of brake shoe forces on Railroad freight cars. Piezo or coil/magnet proof mass devices will harvest vi ...

Physical Sciences Inc (PSI) is working with the NYSEARCH suborganization of the Northeast Gas Association (NGA) to develop the Proactive Infrasonic Gas Pipeline Evaluation Network (PIGPEN) system to detect and warn of third-party damage before it occurs. PIGPEN uses low frequency seismic/acoustic (0.1 to 100 Hz) sensor technology to proactively detect and warn of unauthorized activity near the un ...

The Advanced Traffic Controller (ATC) goal of a standard open architecture for traffic engineering applications will be more fully realized by the transition from proprietary operating system to open source Linux. In Phase I of this project, Precision Traffic Systems (PTS) demonstrated that a real time Linux OS could support an existing traffic signal control application, and perform to 2070 task ...

Our primary concept is a distributed storage system capable of supporting organizations which scale from the small to the very largest. The goal is to build a distributed self-configuring; self-managing and self-healing file storage system which exhibits modular upgradeability and dynamic adaptation to an organization's evolving needs. Our strategy to do this is to exploit a unique scientifically ...