List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. INFLATABLE PADDING FOR HARD SURFACES IN VEHICLE INTERIORS

    SBC: Concept Analysis Corp            Topic: N/A

    OCCUPANT INJURY CAN BE SIGNIFICANTLY REDUCED BY THE INCORPORATION OF PADDING OF HARD SURFACES IN VEHICLE INTERIORS. SEVERAL INTERIOR HARD SURFACES SUCH AS ROOF HEADER, A-PILLAR, AND B-PILLAR ARE DIFFICULT TO PAD DUE TO LIMITED SPACE. WAT IS NEEDED IS AN INFLATABLE PLASTIC BI-LAYER THAT COULD BE ATTACHED TO HARD SURFACES AND GIVE ACCEPTABLE WEAR AND APPEARANCE WHEN UNINFLATED, YET BE INFLATABLE DUR ...

    SBIR Phase I 1990 Department of Transportation
  2. STUDY AND EVALUATION OF FIBER REINFORCED DOWELL BARS FOR USEIN HIGHWAYS

    SBC: Etc Engineers Inc.            Topic: N/A

    DOWEL BARS HAVE TRADITIONALLY BEEN USED AS AN IMPORTANT LOADTRANSFER MECHANISM ON OUR FEDERAL HIGHWAYS. A SIGNIFICANT PROBLEM OCCURRS WITH THE USE OF THESE BARS DUE TO RUST AND RESULTANT SPALLING AND CRACKING CONCRETE. COMPOSITE REINFORCING BARS (CRB) HAVE BECOME WIDELY USED FOR CRACK CONTROL IN MANY REINFORCED CONCRETE STRUCTURES EXPOSED TO AGGRESSIVE ENVIRONMENTS. A LIMITED AMOUNT OF DATA IS AVA ...

    SBIR Phase II 1990 Department of Transportation
  3. EFFECT OF LOW TEMPERATURE PROCESSING ON POLYSILICON THIN FILM TRANSISTORS

    SBC: ENERGY CONVERSION DEVICES, INC.            Topic: N/A

    N/A

    SBIR Phase I 1990 National Science Foundation
  4. REAL-TIME HOLOGRAPHIC STEREOGRAM DISPLAY

    SBC: Kms Fusion Inc            Topic: N/A

    KMSF PROPOSES TO DEVELOP A REAL-TIME DISPLAY CAPABLE OF HOLOGRAPHICALLY PROJECTING A 3-DIMENSIONAL IMAGE. DURING THE PHASE I EFFORT, KMS WILL RESEARCH AND EXAMINE THE LIMITATIONS OF THE STATE-OF-THE-ART, ANALYZE EXISTING ELECTRONIC HOLOGRAPHY SYSTEMS, DESIGN A MATHEMATICAL MODEL OF A PROJECTED HOLOGRAPHIC DISPLAY FOR HOLOGRAPHIC STEREOGRAMS AND DEVELOP AN OPTIMIZED DESIGN FOR A HOLOGRAPHIC AUTO-ST ...

    SBIR Phase I 1990 National Science Foundation
  5. VIEW FACTOR APPLICATIONS IN COMPUTER GRAPHICS

    SBC: Kms Fusion Inc            Topic: N/A

    THE OBJECTIVE OF THE PROPOSED WORK IS TO APPLY RADIATION TRANSPORT METHODS DEVELOPED TO STUDY CONTROLLED FUSION TO SIMULATE THE REFLECTION OF LIGHT IN COMPUTER GRAPHICS. VIEWFACTOR METHODS HAVE RECENTLY BEEN APPLIED TO THE STUDY OF TIME DEPENDENT RADIATION TRANSPORT IN ENCLOSURES. CODES DEVELOPED AT KMS FUSION, INC. (KMS) HAVE THE ABILITY, BELIEVED UNIQUE FOR VIEW FACTOR CODES, OF SOLVING TIME DEP ...

    SBIR Phase I 1990 National Science Foundation
  6. PRODUCTION AND CHARACTERIZATION OF POLYCLONAL ANTIBODIES AGAINST MALIC ENZYME AND POST INITIATION PROTEIN NUMBER 5

    SBC: Neogen Corporation            Topic: N/A

    N/A

    SBIR Phase I 1990 National Science Foundation
  7. STUDY AND EVALUATION OF FIBER REINFORCED DOWELL BARS FOR USEIN HIGHWAYS

    SBC: Etc Engineers Inc.            Topic: N/A

    N/A

    SBIR Phase I 1989 Department of Transportation
  8. DEVELOPMENT OF A COMMERCIALLY VIABLE YELLOW PERCH (PERCA FLAVESCENS) CULTURE SYSTEM

    SBC: Bay Port Fish Company Inc.            Topic: N/A

    COMMERCIAL HARVEST OF YELLOW PERCH IN THE GREAT LAKES REGIONCANNOT MEET MARKET DEMAND. ADDITIONAL CONTROLS BEING PLACEDON COMMERCIAL HARVEST, CONSUMER DEMAND AND HIGH PERCH PRICESHAVE GENERATED RENEWED INTEREST IN PERCH AQUACULTURE. ATTEMPTS TO ESTABLISH COMMERCIAL PERCH CULTURE HAVE FACED THREE MAJOR CONSTRAINTS: 1) SEASONAL SUPPLY OF FINGERLINGS, 2) FEEDING FRY PRACTICAL FEEDS, AND 3) PROVIDING ...

    SBIR Phase II 1989 National Science Foundation
  9. FLOAT ZONE SILICON SHEET GROWTH

    SBC: Energy Materials Research            Topic: N/A

    RESEARCH ON A NOVEL PROCESSING TECHNOLOGY TO PRODUCE SHEET MATERIALS FROM BULK SOLIDS IS PROPOSED. THE PRINCIPAL OBJECTIVE IS TO DEVELOP A MEANS TO PRODUCE HIGH QUALITY, LOWCOST SILICON RIBBON. THIS NEW TECHNOLOGY WHEN DEVELOPED WILL REDUCE THE COST OF SILICON WAFER PRODUCTION AND RESPONDTO THE NATIONAL NEED FOR INCREASED ON SHORE MANUFACTURING PRODUCTIVITY IN THE ELECTRONICS INDUSTRY. CURRENT SIL ...

    SBIR Phase I 1989 National Science Foundation
  10. ELECTROLUMINESCENT FIBER OPTIC SHOCK SENSOR

    SBC: Kms Fusion Inc            Topic: N/A

    THE MEASUREMENT OF DYNAMIC HIGH-PRESSURES IS A PROBLEM OF INTEREST IN MANY FIELDS. THE PERFORMANCE OF EXISTING DYNAMIC PRESSURE SENSORS IS OFTEN LIMITED BY HIGH AMPLITUDE,BROADBAND ELECTROMAGNETIC NOISE ENDEMIC TO THE ENVIRONMENTS IN WHICH THEY ARE USED. TO OBTAIN A MORE USEFUL PRESSURE DIAGNOSTIC THIS PROJECT WILL ATTEMPT TO DEVELOP A FIBER OPTIC SENSOR WHICH PRODUCES A LOW NOISE STRESS DEPENDENT ...

    SBIR Phase II 1989 National Science Foundation

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government