Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. EVALUATION OF GENERAL FAILURE TYPES IN SAFETY ANALYSIS

    SBC: John Wreathall & Company            Topic: N/A

    THIS WORK IS TO DEVELOP A METHOD TO IMPROVE THE ABILITY OF THE USNRC TO EVALUATE THE OPERATIONAL SAFETY SIGNIFICANCE OF OCCURANCES AT NUCLEAR POWER PLANTS. PERHAPS THE AREA OF GREATEST SAFETY SIGNIFICANCE IS HUMAN PERFORMANCE, BUT THE TECHNIQUES USED BY NRC DO NOT EVALUATE HUMAN PERFORMANCE IN ANY SYSTEMIC WAY. THE WORK IS PROPOSED TO BE PERFORMED IN THREE STAGES, AND BUILDS ON METHODS THAT HAVE B ...

    SBIR Phase I 1992 Nuclear Regulatory Commission
  2. IMPROVED AEROSOL CAN

    SBC: Materials Engineering &            Topic: N/A

    N/A

    SBIR Phase I 1990 Department of Transportation
  3. Determination of the Onset of Widespread Fatigue Damage

    SBC: Qual-x, Inc.            Topic: N/A

    QUAL-X proposes to nondestructively inspect the extensive surface areas of aging commercial airliners for corrosion and fatigue damage. QUAL-X will characterize the above surfaces both at local and global areas of interest using chemical gas penetrants and advanced gas sensor techniques; both of which were developed as an extension of the company's unique and singular experience with the ket gas ...

    SBIR Phase I 1996 Department of Transportation
  4. DEVELOPMENT OF A PROTOTYPE REMOTE LONGITUDINAL STRESS MONITORING DEVICE

    SBC: Salient Systems Inc.            Topic: N/A

    A LOW COST MEASUREMENT MODULE TAILORED TO THE APPLICATION OFSENSING RAIL LONGITUDINAL STRESS AND TEMPERATURE IS TO BE DEVELOPED AND INSTALLED IN TWO EXISTING TEST SITES. RESEARCH INTO THE BEST METHOD OF GENERATING POWER AND COMMUNICATING TO THE OUTSIDE WORLD WITHOUT HARD-WIRED CONNECTIONS IS TO BE DETERMINED. A PROTOTYPE OF THE NON-HARD-WIRED CONFIGURATION IS EXPECTED TO BE BUILT AND INSTALLED.

    SBIR Phase II 1990 Department of Transportation
  5. AIRCRAFT SAFTEY

    SBC: SYSTEMS & ELECTRONICS, INC.            Topic: N/A

    N/A

    SBIR Phase I 1992 Department of Transportation
  6. Design, Development and Testing of Optimized "Soft Crack Arrestors"

    SBC: ENGINEERING MECHANICS CORPORATION OF COLUMBUS            Topic: 07PH1

    EMC2''s Phase II proposal focuses on continuing development of "Soft Crack Arrestors" through additional key material property, detailed analytical refinement of the design, and full-scale pipe validation testing.  This material testing will be done over a range of temperatures to cover extreme conditions for future pipeline designs, with special attention to arctic applications.  It is ...

    SBIR Phase II 2009 Department of Transportation
US Flag An Official Website of the United States Government