Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until September, 2020.

  1. Determination of the Onset of Widespread Fatigue Damage

    SBC: Qual-x, Inc.            Topic: N/A

    QUAL-X proposes to nondestructively inspect the extensive surface areas of aging commercial airliners for corrosion and fatigue damage. QUAL-X will characterize the above surfaces both at local and global areas of interest using chemical gas penetrants and advanced gas sensor techniques; both of which were developed as an extension of the company's unique and singular experience with the ket gas ...

    SBIR Phase I 1996 Department of Transportation
  2. Advanced Concept Basalt Fiber Reinforcement for Concrete

    SBC: Research & Technology Corp            Topic: N/A

    Extensive research (Ukraine) has shown that high strength continuous fibers of basalt can be produced. These fibers are inexpensive and have exceptionally high strength, stiffness and corrosion resistance. Basalt is a naturally occurring volcanic mineral, consisting a variety concentration of oxides. The product envisioned is a low-cost, corrosion resistant replacement for steel bar in reinforc ...

    SBIR Phase I 1996 Department of Transportation
  3. Fatigue Crack Detection Via Differential Thermography

    SBC: Stress Photonics, Inc.            Topic: N/A

    N/A

    SBIR Phase II 1996 Department of Transportation
  4. Use of Coal Fines for Production of Clean Fuel and Vapor-Grown Carbon Fiber

    SBC: Applied Sciences            Topic: N/A

    N/A

    SBIR Phase II 1996 Department of Energy
  5. Environmentally Responsible Recycling of Thin-Film Cadmium Telluride Modules

    SBC: First Solar, Llc            Topic: N/A

    N/A

    SBIR Phase II 1996 Department of Energy
  6. An Engineered RNA/DNA Polymerase to Increase Speed and Economy of DNA Sequencing

    SBC: PROMEGA CORP.            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of Energy
  7. Composite Ceria Eletrolytes for Solid Oxide Fuel Cells

    SBC: Nextech Materials, Ltd.            Topic: N/A

    40826 November 13, 1996 NexTech Materials, Ltd. Although oxygen-conducting ceramics are used as electrolytes in solid oxide fuel cells (SOFCs), their requirements for high temperature operation cause material compatibility problems. The primary obstacles are: high operating temperatures of the current materials, low volumetric efficiency, and poor materi ...

    SBIR Phase I 1996 Department of Energy
  8. CLOSED CYCLE CRYOCOOLER WITH HYBRID HEAT EXCHANGER- REGENERATOR

    SBC: Cvi Inc.            Topic: N/A

    IT IS PROPOSED TO INVESTIGATE SEVERAL NOVEL REGENERATOR DESIGNS TOWARD PROVING THE FEASIBILITY OF HIGH HEAT CAPACITYIN THE 4.5 TO 10 DEGREE K RANGE. IN ADDITION, OPTIMIZATION OF THE OPERATING TIMING SEQUENCE OF THESE REGENERATORS WILL BE SIMULATED THROUGH A COMPUTER PROGRAM AND THE EFFECT OF PARAMETERS SUCH AS TEMPERATURE AND PRESSURE WILL BE EVALUATED. THE FINAL RESULTS OF THIS STUDY WILL INDICAT ...

    SBIR Phase II 1984 Department of Energy
  9. MODELING & SIMULATION OF ELECTROLYTIC CELLS

    SBC: Helipump Corp            Topic: N/A

    A COMPUTER IMPLEMENTED MODEL FOR SIMULATING ELECTROLYTIC CELLS WILL BE DEVELOPED. THE MODEL WILL PROVIDE THE TOTAL CURRENT AND ITS DISTRIBUTION IN THE CELL, THE DEPOSIT THICKNESS ALONG THE ELECTRODE, THE OVERPOTENTIAL COMPONENTS,THE OVERALL CELL RESISTANCE AND THE POWER DISSIPATION AS FUNCTION OF THE SYSTEM PARAMETERS. THE LATTER INCLUDES THE APPLIED CELL POTENTIAL OR THE TOTAL CURRENT, THE ELECTR ...

    SBIR Phase II 1984 Department of Energy
  10. UPPER CYLINDER FRICTION AND WEAR DEFICIENCIES ARE INHIBITING THE USE OF CERAMIC CARBIDES, NITRIDES AND OXIDES IN ADIABATIC AND MULTIFUEL DIESEL ENGINES.

    SBC: Hohman Plating & Manufacturing            Topic: N/A

    UPPER CYLINDER FRICTION AND WEAR DEFICIENCIES ARE INHIBITING THE USE OF CERAMIC CARBIDES, NITRIDES AND OXIDES IN ADIABATIC AND MULTIFUEL DIESEL ENGINES. SYNTHETIC POLYOL ESTERS OFFER THE SOLUTION TO THIS DILEMNA. A MATERIALS SYSTEM RING-LINER-BASESTOCK-ADDITIVE MATRIX APPROACH USING A HIGH TEMPERATURE OSCILLATORY FRICTION AND WEAR TESTER IS PROPOSED. THE FRICTION, WEAR AND DEPOSITION RESULTS FROM ...

    SBIR Phase I 1984 Department of Energy
US Flag An Official Website of the United States Government