Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until September, 2020.

  1. Determination of the Onset of Widespread Fatigue Damage

    SBC: Qual-x, Inc.            Topic: N/A

    QUAL-X proposes to nondestructively inspect the extensive surface areas of aging commercial airliners for corrosion and fatigue damage. QUAL-X will characterize the above surfaces both at local and global areas of interest using chemical gas penetrants and advanced gas sensor techniques; both of which were developed as an extension of the company's unique and singular experience with the ket gas ...

    SBIR Phase I 1996 Department of Transportation
  2. Advanced Concept Basalt Fiber Reinforcement for Concrete

    SBC: Research & Technology Corp            Topic: N/A

    Extensive research (Ukraine) has shown that high strength continuous fibers of basalt can be produced. These fibers are inexpensive and have exceptionally high strength, stiffness and corrosion resistance. Basalt is a naturally occurring volcanic mineral, consisting a variety concentration of oxides. The product envisioned is a low-cost, corrosion resistant replacement for steel bar in reinforc ...

    SBIR Phase I 1996 Department of Transportation
  3. Fatigue Crack Detection Via Differential Thermography

    SBC: Stress Photonics, Inc.            Topic: N/A

    N/A

    SBIR Phase II 1996 Department of Transportation
  4. Affordable Lightweight Electronic Packaging Materials

    SBC: Cast Metal Composites            Topic: N/A

    The objective of the proposed program is to develop and demonstrate a low-cost, high thermal conductivity, low mass density material for use in electronic packaging. Target material characteristics are: less than aluminum heat sinks, thermal conductivity at least 200 W/m-k, and mass density less than aluminum. To address this objective, Cast Metal Composites, Inc. will produce lightweight, high ...

    SBIR Phase I 1996 Department of DefenseDefense Advanced Research Projects Agency
  5. Solid State Growth of Advanced Ceramic Single Crystals

    SBC: CERONE, INC.            Topic: N/A

    The proposed experimental program demonstrates the technical feasibility of growing single crystals of technologically important ceramics by the solid state method. The proposed method relies on discontinuous grain growth which is often regarded as undesirable and deleterious during the sintering of many ceramics. In order to demonstrate the technical feasibility and versatility of the solid sta ...

    SBIR Phase I 1996 Department of DefenseDefense Advanced Research Projects Agency
  6. A Novel Electrochemical Machining Process for Hard Passive Alloys

    SBC: Faraday Technology, Inc.            Topic: N/A

    This Small Business Innovation Research Phase I project will demonstrate a novel process for electrochemical machining nickel superalloys and other hard, passive alloys. Nickel-based superalloys are widely used in various industries, such as aerospace and automative industries. However, nickel superalloys are difficult-to-cut materials. Traditional mechanical methods failed to machine these sup ...

    SBIR Phase I 1996 Department of DefenseDefense Advanced Research Projects Agency
  7. Dynamic Magnetic Consolidation (DMC) Process for Fabricating Advanced Nanostructured Components from Nano Powders

    SBC: IAP RESEARCH, INC.            Topic: N/A

    This SBIR project of Phase I proposes to develop and advance a process technology called Dynamic Magnetic Compaction (DMC). This technology will be useful for fabricating nanostructured components of various material systems such as ceramics, metals, high temperature alloys, and composites from their respective nano powders. The fabrication of nano components from nano powders requires the conso ...

    SBIR Phase I 1996 Department of DefenseDefense Advanced Research Projects Agency
  8. Low Weight, Zero Maintenance Long Endurance SOFC for MUAV

    SBC: IGR Enterprises, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseDefense Advanced Research Projects Agency
  9. System Capture, Synthesis and Evaluation Environment (SCSEE)

    SBC: MTL SYSTEMS, INC.            Topic: N/A

    MTL Systems, Inc (MTL) and the Knowledge-Based Software Engineering Lab of the University of Cincinnati (UC) propose System Capture, Synthesis and Evaluation Environment (SCSEE). Key technologies included in our proposal that will increase our likehood of success are: (1) MTL's simulation-Based Performance Modeling and Analysis technology and toolset to provide high fidelity and quality assessment ...

    SBIR Phase I 1996 Department of DefenseDefense Advanced Research Projects Agency
  10. Title missing

    SBC: MTL SYSTEMS, INC.            Topic: N/A

    N/A

    SBIR Phase II 1996 Department of DefenseDefense Advanced Research Projects Agency
US Flag An Official Website of the United States Government