You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Refractory Coating for Heat Resistant Portable Helipad

    SBC: ELTRON RESEARCH & DEVELOPMENT, INCORPORATED            Topic: N122109

    Eltron Research & Development, Inc (Eltron) has developed a refractory, flexible, inorganic paint that has shown excellent performance in protecting polymers from direct heat sources. In this project, Eltron will coat portable helipad mat materials such as polyethylene and polyester as well as other high temperature polymers and lightweight materials with refractory paint. Eltron"s refractory, cer ...

    SBIR Phase I 2013 Department of DefenseNavy
  2. Multi-material Helipad

    SBC: TOUCHSTONE RESEARCH LABORATORY, LTD.            Topic: N122109

    The goal of the Phase 1 effort is to demonstrate the feasibility of using a structurally flexible multi-layered insulation for increased thermal management and reduced weight for a portable helipad for austere environments compared to the current single material system. Hor gases and thrust particulates from aircraft exhaust can create extreme temperatures and thermal shock leading to premature fa ...

    SBIR Phase I 2013 Department of DefenseNavy
  3. Innovative Cost-Effective and High-Temperature Portable Helipad

    SBC: Frontier Performance Polymers Corporation            Topic: N122109

    The objective of this SBIR Phase I proposal is to develop a lightweight, cost-effective, and high-temperature resistant portable helipad for future helicopters and vertical landing aircrafts. Portable helipads are critical for forward operating bases, and enable aircrafts to land in any area safely and quickly without causing the brownout. The current technology is very effective for rotary crafts ...

    SBIR Phase I 2013 Department of DefenseNavy
  4. High Efficiency 808 nm Laser Pump Diode Arrays with Excellent Beam Quality

    SBC: Princeton Optronics            Topic: N122112

    The Navy is interested in developing high power and high operation efficiency pumps at 808nm for multiple Navy applications. VCSEL technology offers an excellent choice for the development of such laser pumps. Princeton Optronics has developed the technology of high power VCSEL arrays delivering hundreds of watts of power from small chips with>55% efficiency at 976nm. We would use improvements of ...

    SBIR Phase I 2013 Department of DefenseNavy
  5. High Efficiency 808 nm Laser Pump Diode Arrays with Excellent Beam Quality

    SBC: LASER OPERATIONS LLC            Topic: N122112

    As part of an effort funded by HEL-JTO, we recently demonstrated advanced quantum well diode laser designs with enhanced confinement operating at 1500 nm that substantially advanced the state-of-the-art with regard to efficiency, high operating temperature and beam quality. Similar enhanced confinement designs will be implemented at 808 nm to greatly improve both electrical-to-optical efficiency a ...

    SBIR Phase I 2013 Department of DefenseNavy
  6. High Efficiency 808-nm VCSEL Arrays with Excellent Beam Quality

    SBC: nLight Photonics            Topic: N122112

    Today"s high energy Q-switched Nd:YAG lasers are often pumped by stacks of multiple edge-emitting diode laser bars since the vertical-cavity surface-emitting laser (VCSEL) traditionally have been lower in efficiency. In this effort we are proposing a novel VCSEL design which overcomes the efficiency bottleneck in conventional VCSEL while preserving its beneficial attributes such as uniform beam in ...

    SBIR Phase I 2013 Department of DefenseNavy
  7. Deep Vector Sensor System

    SBC: LewTech Research, LLC.            Topic: N122113

    The Phase I program is directed at defining a buoy configuration that will capture the improved signal-to-noise ratios of surface or near-surface targets-of-interest when the acoustic sensor is located below the critical depth and as close to the ocean bottom as possible, capitalizing on the Reliable Acoustic Path. The overall buoy configuration options include a free-floating buoy and a buoy with ...

    SBIR Phase I 2013 Department of DefenseNavy
  8. Deep Vector Sensor System

    SBC: Applied Physical Sciences Corp.            Topic: N122113

    Applied Physical Sciences and the Navmar Applied Sciences propose to adapt existing vector sensor and sonobuoy technology within their respective areas of expertise to develop a preliminary design for a passive deep water directional sonobuoy. The Phase I Base is centered on tasks pertaining to vector sensor design with emphasis on achieving the stringent noise floor criteria in an A-Size sonobuoy ...

    SBIR Phase I 2013 Department of DefenseNavy
  9. Fiber Optic Vector Sensor Sonobuoy System

    SBC: Vibration, Impact and Pressure Sensors, Inc.            Topic: N122113

    VIP Sensors proposes to develop a very low noise, highly sensitive Fiber Optic Vector Sensor (FOVS) System packaged in a size - A sonobuoy. The FOVS includes a triaxial optical accelerometer, an omnidirectional optical hydrophone and an optical compass. Only a pair of single mode optic fibers interconnects the fully passive vector sensor located below sea level to the sonobuoy"s Surface Electronic ...

    SBIR Phase I 2013 Department of DefenseNavy
  10. Deep Vector Sensor System

    SBC: PROGENY SYSTEMS, LLC            Topic: N122113

    The US Navy has a requirement for a Reliable Acoustic Path A-sized sonobuoy system. The major challenge is to reduce sensor electronic noise to exploit the environment. Additionally, A-size introduces numerous technical challenges for flow and vertical motion induced noise mitigation, for data telemetry, and for packaging. Progeny Systems Corporation teamed with UnderSea Sensor Systems, Inc. pro ...

    SBIR Phase I 2013 Department of DefenseNavy
US Flag An Official Website of the United States Government