You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. A Multi-Sensor Hybrid System for Vehicle Classification of Thirteen Classes

    SBC: Migma Systems Inc.            Topic: 081FH4

    Image processing methods have been studied and implemented for the vehicle classification over the past decades. The most dominant approach is the use of vehicle dimension, which requires complex processes of sensor calibration as the vehicle dimensions shown in the imagery are heavily dependent on the camera’s field of view. In general, video systems have physical disadvantages related to the ...

    SBIR Phase II 2013 Department of Transportation
  2. Pedestrian Auto Enforcement Program (PAEP)

    SBC: POLARIS SENSOR TECHNOLOGIES INC            Topic: 122FH3

    We propose an innovative Pedestrian Automotive System for Enforcement and Safety (PASES) that combines commercial-off-the-shelf video or camera components and state-of-the-art microwave(radar) systems with sophisticated software that will not only provide more effective enforcement through effective evidentiary information, but will also enable predictive actions based on vehicle and pedestrian be ...

    SBIR Phase I 2013 Department of Transportation
  3. A Multi-Pedestrian Counting System Using Fusion of Stereo Camera and Laser Scanner

    SBC: Migma Systems Inc.            Topic: 091FH4

    In Phase I, we developed a new system for pedestrian detection, tracking and counting. In this system, both IR LED stereo camera and laser scanner were selected for use. We have demonstrated that our pedestrian counting system can count multiple pedestrians walking in a large group, maintain individual tracks even when some pedestrians walk in unpredictable patterns or leave the crosswalk prematur ...

    SBIR Phase II 2011 Department of Transportation
  4. Stress and Geometry Imaging from Outside the Pipeline

    SBC: JENTEK SENSORS, INC.            Topic: 111PH1

    There is a well defined, yet unfulfilled need for a convenient (non-contact, light weight) and rapid imaging tool for multi-directional, thru-wall stresses (both applied and residual) from the outside of a pipeline. Quantitative stress imaging is needed at mechanical damage and corrosion sites, as well as at other critical locations (dents, bends, etc.). JENTEK is uniquely positioned to deliver ...

    SBIR Phase I 2011 Department of Transportation
  5. AEROSOL CONCENTRATION BY SPACE CHARGE ATOMIZING ELECTROSTATIC PRECIPITATOR

    SBC: David Gordon Associates, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1993 Department of Transportation
  6. DEVELOPMENT OF A COMMERCIAL AIRCRAFT RESIDUAL LIFE MEASUREMENT SYSTEM

    SBC: FOSTER-MILLER, INC.            Topic: N/A

    ECONOMIC FACTORS CONTINUE TO RESULT IN COMMERCIAL AIRCRAFT BEING OPERATED WELL BEYOND THEIR INITIAL DESIGN LIFE. FURTHER, EACH OF THESE AIRCRAFT EXPERIENCES A SUBSTANTIALLY DIFFERENT LOADS AND ENVIRONMENT HISTORY. IN ORDER TO ACCURATELY CALCULATE THE REMAINING LIFE FOR ANY GIVEN AIRCRAFT, AND THEREBY PERMIT IT TO OPERATE SAFELY BEYOND ITS INITIAL DESIGN LIFE, THE HISTORY OF THAT AIRCRAFT MUST BE K ...

    SBIR Phase I 1993 Department of Transportation
  7. Chemical-Free Deicing- A Systems Approach

    SBC: FOSTER-MILLER, INC.            Topic: N/A

    This proposal describes an innovative approach to non-chemical deicing of aircraft which focuses on new technology which could provide revolutionary improvement in the performance of a relatively mature deicing technique. This combined systems approach could be readily incorporated into existing aircraft and ground support equipment. We propose to develop a permanent anti-icing surface treatment ...

    SBIR Phase I 1996 Department of Transportation
  8. "An Object Oriented Network Data Model for Transportation GIS"

    SBC: Gis/trans, Ltd            Topic: N/A

    N/A

    SBIR Phase II 1996 Department of Transportation
  9. MWM-Array Characterization of Widespread Fatigue Damage Onset

    SBC: JENTEK SENSORS, INC.            Topic: N/A

    This proposal will investigate the potential of an enhanced version of the Meandering Winding Magnetometer (MWM), called the MWM-Array, to characterize and predict remaining life for components experiencing widespread fatigue damage. The MWM has already demonstrated the potential to characterize fatigue damage in metals priod to the formation of cracks, as well as the ability to detect and charac ...

    SBIR Phase I 1996 Department of Transportation
  10. Automated Production of Composite Energy Absorbing Utility Poles

    SBC: KaZaK Composites Incorporated            Topic: N/A

    KaZaK Composites, Kaman Sciences and Dr. Malcolm Ray of the University of Iowa propose to investigate the design of energy absorbing utility poles made from composite materials. This team has considerable experience in the multiple technologies needed to successfully complete the proposed program, including design of high performance composite products for automated production and design, analysi ...

    SBIR Phase I 1996 Department of Transportation
US Flag An Official Website of the United States Government