You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Pedestrian Auto Enforcement Program (PAEP)

    SBC: POLARIS SENSOR TECHNOLOGIES INC            Topic: 122FH3

    We propose an innovative Pedestrian Automotive System for Enforcement and Safety (PASES) that combines commercial-off-the-shelf video or camera components and state-of-the-art microwave(radar) systems with sophisticated software that will not only provide more effective enforcement through effective evidentiary information, but will also enable predictive actions based on vehicle and pedestrian be ...

    SBIR Phase I 2013 Department of Transportation
  2. AirCore Reusable InSitu Sampler for CO2 and Trace Gas Measurements

    SBC: KALSCOTT ENGINEERING INC.            Topic: S108

    A novel design for an in situ air sampling sensor for CO2 and trace gases is proposed. The sensor, named AirCore, provides the advantages of existing in situ sensors (e.g. high resolution) but eliminates possible biases in analysis that often originate from imperfect measurement condition. The AirCore provides a significant savings in cost and weight while increasing the capabilities of existing i ...

    SBIR Phase I 2013 National Aeronautics and Space Administration
  3. Low-Cost Manufacturing Technique for Advanced Regenerative Cooling for In-Space Cryogenic Engines

    SBC: Analytical Services, Inc.            Topic: H202

    The goal of the proposed effort is to demonstrate feasibility of using selective laser melting (SLM, an emerging manufacturing technique) to manufacture a subscale combustion chamber liner that features an advanced regenerative cooling technique that combines high performance with low pressure drop. SLM enables the ability to "print" the advanced regenerative liner in mere hours, despite the line ...

    SBIR Phase I 2013 National Aeronautics and Space Administration
  4. Advanced Nanostructured Cathode for Ultra High Specific Energy Lithium Ion Batteries

    SBC: SCIENTIC INC            Topic: H802

    Integrate advanced nanotechnology with energy storage technology to develop advanced cathode materials for use in Li-ion batteries while maintaining a high level of safety, stability, and cycle life, allowing the cathodes to be tailored to provide very high specific energy or very high specific power depending on the relative ratio of the three components-active material, current conductors/collec ...

    SBIR Phase I 2013 National Aeronautics and Space Administration
  5. Low-Cost Multi-Junction Photovoltaic Cells

    SBC: Black Hills Nanosystems            Topic: H804

    The proposed SBIR project will provide a pathway to dramatically reduce the cost of multi-junction solar cells. The project leverages a TRL6 micropackaging process with ~100% yield for cell assembly. Cost savings are critical as space-qualified multi-junction cells render large panel applications prohibitive. The proposed project aims to develop a greatly-simplified manufacturing process that c ...

    SBIR Phase I 2013 National Aeronautics and Space Administration
  6. Design and Development of a Compact and Rugged Phase and Fluorescence Microscope for Space Utilization

    SBC: EAST WEST ENTERPRISES, INC.            Topic: E103

    In this SBIR Phase 1 we propose to develop a novel microscope by integrating Fourier phase contrast microscopy (FPCM) and epi-fluorescence microscopy. In FPCM, the high degree coherence of low power laser source provides well resolved spatial frequency bands in the Fourier plane and the retardation is generated by photo-thermally induced phase transitions in a liquid crystal by varying the intens ...

    SBIR Phase I 2013 National Aeronautics and Space Administration
  7. Nano-structures Enhanced Novel Composite Electrode Material for Batteries

    SBC: SCIENTIC INC            Topic: H1002

    Integrate advanced nanotechnology with energy storage technology to develop advanced cathode material for use in Li-ion batteries while maintaining high level of safety, stability and cycle life, allowing the cathodes to be tailored to provide very high specific energy or very high specific power depending on the relative ratio of the three components- active material, current conductors/collector ...

    SBIR Phase I 2013 National Aeronautics and Space Administration
  8. Particle Flow Physics Modeling for Extreme Environments

    SBC: CFD RESEARCH CORPORATION            Topic: T403

    The liberation of particles induced by rocket plume flow from spacecraft landing on unprepared regolith of the Moon, Mars, and other destinations poses high mission risks for robotic and human exploration activities. This process occurs in a combination of "extreme environments" that combine low gravity, little or no atmosphere, with rocket exhaust gas flow that is supersonic and partially rarefie ...

    STTR Phase I 2013 National Aeronautics and Space Administration
  9. Efficient Conversion of Carbon Dioxide into Methane using 3rd Generation Ionic Liquids

    SBC: AZ Technology Inc            Topic: H101

    This work directly addresses a technology of interest listed in Section 9, sub-section H1.01 In-Situ Resource Utilization, specifically "Highly efficient reactors for carbon monoxide/carbon dioxide (CO/CO2) conversion into methane (CH4)."The proposal will investigate combining recent work that demonstrates outstanding CO2 sorption by third generation ionic liquids (ILs) without an increase in visc ...

    SBIR Phase I 2013 National Aeronautics and Space Administration
  10. Fine Grained Tungsten Claddings for Cermet Based NTP Systems

    SBC: Plasma Processes, LLC            Topic: H202

    In October 2011, NASA initiated the Nuclear Cryogenic Propulsion Stage (NCPS) program to evaluate the feasibility and affordability of Nuclear Thermal Propulsion (NTP). A critical aspect of the program is to develop a robust, stable nuclear fuel. One of the nuclear fuel configurations currently being evaluated is a cermet-based material comprised of uranium dioxide particles encased in a tungste ...

    SBIR Phase I 2013 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government