List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Pedestrian Auto Enforcement Program (PAEP)

    SBC: Polaris Sensor Technologies, Inc.            Topic: 122FH3

    We propose an innovative Pedestrian Automotive System for Enforcement and Safety (PASES) that combines commercial-off-the-shelf video or camera components and state-of-the-art microwave(radar) systems with sophisticated software that will not only provide more effective enforcement through effective evidentiary information, but will also enable predictive actions based on vehicle and pedestrian be ...

    SBIR Phase I 2013 Department of Transportation
  2. High Speed Imaging Spectropolarimeter for Dynamic Samples

    SBC: Polaris Sensor Technologies, Inc.            Topic: 9020663R

    Spectroscopic ellipsometry is recognized as the gold standard in noncontact characterization of the refractive index and thickness of a thin optical film or film stack on a substrate. However, it suffers from a number of shortcomings, perhaps the most important of which is the time required to perform a single measurement. Moreover, manufacturers are interested in comprehensive evaluation of thin ...

    SBIR Phase I 2013 Department of CommerceNational Institute of Standards and Technology
  3. Body Orientation Sensor System (BOSS)

    SBC: Archangel Systems, Inc.            Topic: 07NH1

    The objective of this work is to develop a low cost 6 DOF body tracking system to monitor the orientations of an occupants and pedestrians as well as vehicle kinematics in vehicular impact tests. This tracker system can be standalone or part of a subsystem that can communicate with other trackers and external computer via serial, USB and/or Bluetooth interface. The proposed tracker coined Body O ...

    SBIR Phase I 2008 Department of Transportation
  4. Dynamic Non-contact 3D Measurement System for Rollover Testing

    SBC: Photon-x, Inc.            Topic: 07NH2

    Photon-X is proposing to develop an innovative dynamic 3D roof imaging system to monitor vehicle roof deformation during vehicle rollover testing. The 3D imaging system will capture real-time dynamic motion of the roof and vehicle occupants for playback analysis or modeling to enhance overall safety in rollover crashes. The system will provide photographic resolution 3D imagery with the ability ...

    SBIR Phase I 2008 Department of Transportation
  5. An Inexpensive Structural Core Material for Composite Bridges

    SBC: Polymer Bridge Systems, Inc.            Topic: N/A

    Polymer Bridge Systems, with over 8 years of research composite bridges, found that success hinges on being dollar-for-dollar cost competitive with steel and concrete. We founded the four "golden rules" that are required: the bridge must be: 1) factory build; 2) road transportable; 3) installed in 1 eight-hour day; and 4) be cost-competitive on an installed cost basis. This bridge will be buil ...

    SBIR Phase I 1996 Department of Transportation
  6. IMPROVED RADIATION DETECRTOR: THE MULTI-DIMENSIONAL NEUTRON RADIOMETER

    SBC: Tensor Technology Inc.            Topic: N/A

    THIS PROPOSAL IS TO DETERMINE THE SPATIAL RESOLUTION OF A NEW TYPE OF MULTI-DIMENSIONAL X-Y DETECTOR WHICH PROVIDES THE POSITION IN AN X-Y PLANE OF NEUTRAL PARTICLE INTERACTIONS FOR USE IN AIRPORT SECURITY SYSTEMS FOR INSPECTION OF SEALED LUGGAGE.

    SBIR Phase I 1993 Department of Transportation

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government