You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Pedestrian Auto Enforcement Program (PAEP)

    SBC: POLARIS SENSOR TECHNOLOGIES INC            Topic: 122FH3

    We propose an innovative Pedestrian Automotive System for Enforcement and Safety (PASES) that combines commercial-off-the-shelf video or camera components and state-of-the-art microwave(radar) systems with sophisticated software that will not only provide more effective enforcement through effective evidentiary information, but will also enable predictive actions based on vehicle and pedestrian be ...

    SBIR Phase I 2013 Department of Transportation
  2. Improved Decision Support Tools for State of Good Repair

    SBC: TWILIGHT TRAINING, L.L.C.            Topic: 131FT2

    Every asset ages. Pipes, roads, computers, cars, etc. This fact is inevitable. And, as a result of the aging process, every asset suffers a degradation in its intended capability or performance over time. Yet every day, millions of people in the U.S. get up in the morning expecting that they will be able to travel to work, drink clean water, use the Internet, and so on. It usually takes a catastro ...

    SBIR Phase I 2013 Department of Transportation
  3. WS-BD Conformant Handheld Multi-biometric Acquisition System

    SBC: Fulcrum Biometrics, LLC            Topic: 9010477TT

    Secure trusted biometric validation of identity has never been more important. The increase in global terrorism, unfettered identity theft and new legislation requiring multi-factor authentication are a few of the driving factors. The biometrics industry has not actively responded to the changing market conditions being driven by the explosion in mobile computing. Millions of new mobile devices ar ...

    SBIR Phase II 2013 Department of CommerceNational Institute of Standards and Technology
  4. Low-Cost Manufacturing Technique for Advanced Regenerative Cooling for In-Space Cryogenic Engines

    SBC: Analytical Services, Inc.            Topic: H202

    The goal of the proposed effort is to demonstrate feasibility of using selective laser melting (SLM, an emerging manufacturing technique) to manufacture a subscale combustion chamber liner that features an advanced regenerative cooling technique that combines high performance with low pressure drop. SLM enables the ability to "print" the advanced regenerative liner in mere hours, despite the line ...

    SBIR Phase I 2013 National Aeronautics and Space Administration
  5. Advanced Nanostructured Cathode for Ultra High Specific Energy Lithium Ion Batteries

    SBC: SCIENTIC INC            Topic: H802

    Integrate advanced nanotechnology with energy storage technology to develop advanced cathode materials for use in Li-ion batteries while maintaining a high level of safety, stability, and cycle life, allowing the cathodes to be tailored to provide very high specific energy or very high specific power depending on the relative ratio of the three components-active material, current conductors/collec ...

    SBIR Phase I 2013 National Aeronautics and Space Administration
  6. Advanced Cathode for Ultra-High Energy Li-Ion Batteries

    SBC: LYNNTECH INC.            Topic: H802

    Advanced lithium-ion (Li-ion) batteries are currently under development for Extravehicular Activity Suits, Altair Lunar Landers, and Lunar Mobility Systems. However, low voltage operation and low capacity cathode of current Li-ion batteries limits both volumetric and gravimetric energy density. High capacity cathode materials with high voltage operation are needed to offer the required gains at t ...

    SBIR Phase I 2013 National Aeronautics and Space Administration
  7. CarbAl(TM) Based Thermal Management for Space Flight Systems Application

    SBC: APPLIED NANOTECH, INC.            Topic: S304

    Thermal Transfer is a critical part of power electronics application in both terrestrial and space environments. Due to longer lifetime expectancies and harsh operational conditions, space vehicles require unique materials to deal with the increasing electrical and thermal loads placed upon the structure. Increasing use of power electronics including high current carrying semiconductor devices s ...

    SBIR Phase I 2013 National Aeronautics and Space Administration
  8. High Energy Density, High Power Density, High Cycle Life Flywheel Energy Storage Systems

    SBC: BALCONES TECHNOLOGIES LLC            Topic: S304

    Balcones Technologies (BT), LLC proposes to leverage technologies developed by and resident in BT, The University of Texas Center for Electromechanics (CEM) and Applied Nanotech Incorporated (ANI) in the areas of carbon nanotube composites (CNT) and terrestrial and space-based flywheel energy storage systems to address SBIR 2012 subtopic S3.04 Power Electronics and Management, and Energy Storage. ...

    SBIR Phase I 2013 National Aeronautics and Space Administration
  9. Design and Development of a Compact and Rugged Phase and Fluorescence Microscope for Space Utilization

    SBC: EAST WEST ENTERPRISES, INC.            Topic: E103

    In this SBIR Phase 1 we propose to develop a novel microscope by integrating Fourier phase contrast microscopy (FPCM) and epi-fluorescence microscopy. In FPCM, the high degree coherence of low power laser source provides well resolved spatial frequency bands in the Fourier plane and the retardation is generated by photo-thermally induced phase transitions in a liquid crystal by varying the intens ...

    SBIR Phase I 2013 National Aeronautics and Space Administration
  10. Nano-structures Enhanced Novel Composite Electrode Material for Batteries

    SBC: SCIENTIC INC            Topic: H1002

    Integrate advanced nanotechnology with energy storage technology to develop advanced cathode material for use in Li-ion batteries while maintaining high level of safety, stability and cycle life, allowing the cathodes to be tailored to provide very high specific energy or very high specific power depending on the relative ratio of the three components- active material, current conductors/collector ...

    SBIR Phase I 2013 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government