Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until September, 2020.

  1. Demonstration of a Low-Cost Vehicle Monitoring

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: 112FM1

    During the Phase I SBIR Effort, Mainstream demonstrated a unique vehicle monitoring system (VMS) for tractor trailer applications. The development was driven by the need to easily store, retrieve, and transfer key trailer parameters to the tractor and the need to electronically transfer key driver, tractor, and trailer information to roadside inspectors and maintenance personnel. In Phase I, we ...

    SBIR Phase II 2013 Department of Transportation
  2. Real Time Signal State Transition Software for ATC- NTCIP Interface

    SBC: Advanced Technologies, Inc            Topic: 06FH1

    Phase II Project Scope: ATI has developed an open source Signal Control Programming Environment (SCOPE) that ➢ Implements Actuated Control with Min Recall Mode, Max Recall Mode, Gap Out Mode, Max Out Mode, Presence Mode, Lane-by-Lane Control. ➢ Contains a Pretimed Mode allowing control of 3-leg, 4-leg, and Texas Diamond Intersections ➢ Can be easily ported to any operating system. ➢ Can ha ...

    SBIR Phase II 2012 Department of Transportation
  3. A Quantitative Non-destructive Residual Stress Assessment Tool for Pipelines

    SBC: Generation 2 Materials Technology Llc            Topic: 111PH2

    There exists a wide-range need in both industry and government for quantitative residual stress measurements. Generation 2 Materials Technology LLC (G2MT) will collaborate with partners from industry and government to calibrate and commercialize the eStress system to assess residual stress from mechanical damage and re-rounding. The industrial members, consortiums, and government laboratories who ...

    SBIR Phase II 2012 Department of Transportation
  4. Dynamic Non-Contact 3D Measurement System for Rollover Testing

    SBC: Photon-x, Inc.            Topic: 07NH2

    During Phases I and II, Photon-X successfully demonstrated the feasibility of applying its patented Spatial Phase Imaging technology to the problem of non-contact 3D imaging during a rollover test and delivered a viable prototype system. During Phase IIB, Photon-X will continue to refine the system in preparation for commercialization. Photon-X will use this opportunity to add an additional camer ...

    SBIR Phase II 2012 Department of Transportation
  5. Advanced Simulation Framework for the Mesoscale Dynamics of Heterogeneous Explosives

    SBC: Streamline Numerics, Inc.            Topic: OSD09W04

    The proposed work seeks to develop a computational tool to conduct sophisticated and realistic computational modeling of the mesoscale dynamics of heterogeneous energetic materials/high explosives (HEs) under the effects of imposed loads. Designing propulsion devices and munitions for precise operational performance demands comprehensive understanding and manipulation of the spatial and temporal d ...

    SBIR Phase II 2012 Department of DefenseOffice of the Secretary of Defense
  6. Countermeasures to Malicious Hardware to Improve Software Protection Systems

    SBC: Clear Hat Consulting, Inc.            Topic: OSD10IA1

    The availability and low cost of COTS software and hardware components has resulted in their deployment across a wide array of critical defense and industry applications. Clear Hat focused their Phase 1 effort on developing countermeasures for malicious hard disk firmware. Although we will continue our research and development of technologies designed to ensure the integrity of disk drive firmware ...

    SBIR Phase II 2012 Department of DefenseOffice of the Secretary of Defense
  7. Field Programmable Gate Array (FPGA) Physical Unclonable Functions

    SBC: Lewis Innovative Technologies, Inc.            Topic: OSD10A02

    LIT accomplished all Phase I goals and technical objectives. In Phase I LIT produced an effective Random Number Generator (RNG) and tested two PUF designs. The PUF designs showed greatly improved Entropy and Stability over other technologies. LITs Entropy Goal for Phase II is 100% (already proven by analysis) and the Stability goal is one bit error per million bits. In Phase II LIT will ma ...

    SBIR Phase II 2012 Department of DefenseOffice of the Secretary of Defense
  8. Parallel Operation of Compact, Efficient Turbogenerators for Robust Tactical Energy Independence

    SBC: Integrated Solutions For Systems, Inc.            Topic: OSD10EP1

    The need for clean, reliable electrical power is increasing in both the military and commercial sectors, which places high priority on technologies that provide flexibility and increased energy independence. The potential for reduced maintenance, high reliability, and increased durability is currently being demonstrated with microturbine generator (MTG) hardware. Currently these MTGs have been lar ...

    SBIR Phase II 2012 Department of DefenseOffice of the Secretary of Defense
  9. The Application of Advanced Technology to Traffic Enforcement

    SBC: Anacapa Sciences            Topic: N/A

    N/A

    SBIR Phase II 1996 Department of Transportation
  10. NEURAL NETWORK LANE CHANGE DETECTOR

    SBC: Exodyne Technologies, Inc.            Topic: N/A

    N/A

    SBIR Phase II 1993 Department of Transportation
US Flag An Official Website of the United States Government