Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. A Quantitative Non-destructive Residual Stress Assessment Tool for Pipelines

    SBC: Generation 2 Materials Technology Llc            Topic: 111PH2

    There exists a wide-range need in both industry and government for quantitative residual stress measurements. Generation 2 Materials Technology LLC (G2MT) will collaborate with partners from industry and government to calibrate and commercialize the eStress system to assess residual stress from mechanical damage and re-rounding. The industrial members, consortiums, and government laboratories who ...

    SBIR Phase II 2012 Department of Transportation
  2. Dynamic Non-Contact 3D Measurement System for Rollover Testing

    SBC: Photon-x, Inc.            Topic: 07NH2

    During Phases I and II, Photon-X successfully demonstrated the feasibility of applying its patented Spatial Phase Imaging technology to the problem of non-contact 3D imaging during a rollover test and delivered a viable prototype system. During Phase IIB, Photon-X will continue to refine the system in preparation for commercialization. Photon-X will use this opportunity to add an additional camer ...

    SBIR Phase II 2012 Department of Transportation
  3. Field Programmable Gate Array (FPGA) Physical Unclonable Functions

    SBC: Lewis Innovative Technologies, Inc.            Topic: OSD10A02

    LIT accomplished all Phase I goals and technical objectives. In Phase I LIT produced an effective Random Number Generator (RNG) and tested two PUF designs. The PUF designs showed greatly improved Entropy and Stability over other technologies. LITs Entropy Goal for Phase II is 100% (already proven by analysis) and the Stability goal is one bit error per million bits. In Phase II LIT will ma ...

    SBIR Phase II 2012 Department of DefenseOffice of the Secretary of Defense
  4. Parallel Operation of Compact, Efficient Turbogenerators for Robust Tactical Energy Independence

    SBC: Integrated Solutions For Systems, Inc.            Topic: OSD10EP1

    The need for clean, reliable electrical power is increasing in both the military and commercial sectors, which places high priority on technologies that provide flexibility and increased energy independence. The potential for reduced maintenance, high reliability, and increased durability is currently being demonstrated with microturbine generator (MTG) hardware. Currently these MTGs have been lar ...

    SBIR Phase II 2012 Department of DefenseOffice of the Secretary of Defense
  5. Enhancing the Usability of an Intersection Collision Avoidance Simulation Method

    SBC: Rioux Engineering            Topic: 03FH2

    The TEXAS Model for Intersection Traffic is a high-quality single-intersection microscopic traffic simulation model developed at The University of Texas at Austin. It analyzes in sub microscopic detail the behavior of driver-vehicle units as they go through an intersection and intermix with other traffic flows. It has detailed intersection geometry, path following, microscopic car following, lan ...

    SBIR Phase II 2008 Department of Transportation
  6. NEURAL NETWORK LANE CHANGE DETECTOR

    SBC: Exodyne Technologies, Inc.            Topic: N/A

    N/A

    SBIR Phase II 1993 Department of Transportation
US Flag An Official Website of the United States Government