Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Augmenting Inductive Loop Vehicle Sensor Data with SPAT and GrID (MAP) via Data Fusion

    SBC: Harmonia Holdings Group, LLC            Topic: 111FH2

    Our goal is to create a demonstrable software system that we call IntelliFusion, which fuses Connected Vehicle data with data from traditional inductive loop detectors and uses this data to improve traffic control at intersections across the country. Our work will improve the safety of intersections and improve the mobility of traffic through adaptive traffic control which uses data produced by I ...

    SBIR Phase II 2013 Department of Transportation
  2. Coating Existing Concrete Barriers to Reduce Rollover Potential

    SBC: Nanosonic Inc.            Topic: 121FH1

    The objective of this DoT SBIR program is to further establish the technical foundation of low friction HybridSil® Slippery Overturn Automobile Protection (SOAP) coatings on concrete barriers for drastic reductions in vehicle rollover potential and significantly increased concrete impact durability thus, enabling the rapid commercial integration of these coatings. To meet this challenge, NanoSoni ...

    SBIR Phase II 2013 Department of Transportation
  3. WS-BD Conformant Handheld Multi-biometric Acquisition System

    SBC: Fulcrum Biometrics, LLC            Topic: 9010477TT

    Secure trusted biometric validation of identity has never been more important. The increase in global terrorism, unfettered identity theft and new legislation requiring multi-factor authentication are a few of the driving factors. The biometrics industry has not actively responded to the changing market conditions being driven by the explosion in mobile computing. Millions of new mobile devices ar ...

    SBIR Phase II 2013 Department of CommerceNational Institute of Standards and Technology
  4. Inline Material Electrical Characterization Sensor (IMECS)

    SBC: PANERATECH, INC.            Topic: N/A

    There is no capability to rapidly assess the electrical properties of nanofiber films during manufacturing and prepregging process. Continuous monitoring of these films will guide the U.S. nanofiber manufacturing industry in optimizing and increasing the yield rate with proper process optimization and avoid any inconsistency in the process and the cost with associated waste material. To address th ...

    SBIR Phase II 2013 Department of CommerceNational Institute of Standards and Technology
  5. Compact and Portable Hyperlite Multi-Occupant Hyperbaric Chamber

    SBC: PCCI, Inc.            Topic: 813NR

    In Phase II, the PCCI Team will conduct the research and development required to extend the design of the multi-occupant, flexible, hyperbaric chamber to withstand an internal pressure of 165 feet of sea water (fsw), up from the 70 fsw design goal of the Phase I SBIR. This increased pressure rating will both benefit the NOAA Diving Program, by allowing treatment of divers to U.S. Navy Table 6A ap ...

    SBIR Phase II 2012 Department of Commerce
  6. A Quantitative Non-destructive Residual Stress Assessment Tool for Pipelines

    SBC: Generation 2 Materials Technology Llc            Topic: 111PH2

    There exists a wide-range need in both industry and government for quantitative residual stress measurements. Generation 2 Materials Technology LLC (G2MT) will collaborate with partners from industry and government to calibrate and commercialize the eStress system to assess residual stress from mechanical damage and re-rounding. The industrial members, consortiums, and government laboratories who ...

    SBIR Phase II 2012 Department of Transportation
  7. Dynamic Non-Contact 3D Measurement System for Rollover Testing

    SBC: Photon-x, Inc.            Topic: 07NH2

    During Phases I and II, Photon-X successfully demonstrated the feasibility of applying its patented Spatial Phase Imaging technology to the problem of non-contact 3D imaging during a rollover test and delivered a viable prototype system. During Phase IIB, Photon-X will continue to refine the system in preparation for commercialization. Photon-X will use this opportunity to add an additional camer ...

    SBIR Phase II 2012 Department of Transportation
  8. Prediction of Equivalent System Temperature: A Computer Methodology

    SBC: Applied Data Trends, Inc.            Topic: N/A

    There is a global trend towards utilization of satellite communications for information services. Equivalent system temperature, Ts, is a significant parameter in quantifying the antenna system/link performance, because it represents the noise power spectral density in antenna system figures-of-merit, such as receiver gain/system temperature (G/T), and end-to-end Signal to Noise Ratio (SNR). Unf ...

    SBIR Phase II 1996 Department of Commerce
  9. An Expert System for Aquaculture Environment Control

    SBC: Ortech Engineering Inc.            Topic: N/A

    This Small Business Innovation Research Phase I project will explore the use of a fuzzy logic based expert system in a closed loop control system for nitrate removal (denitrification) from large aquaculture systems. Nitrate is naturally generated by the bio-mass in any aquatic system. Current techniques for the control of nitrate levels are almost exclusively based on water exchange. For large ...

    SBIR Phase II 1996 Department of Commerce
  10. "Sensor Systems for Hazardous Conditions in High Speed Rail"

    SBC: ENSCO Inc            Topic: N/A

    N/A

    SBIR Phase II 1996 Department of Transportation
US Flag An Official Website of the United States Government