List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Pedestrian Auto Enforcement Program (PAEP)

    SBC: Polaris Sensor Technologies, Inc.            Topic: 122FH3

    We propose an innovative Pedestrian Automotive System for Enforcement and Safety (PASES) that combines commercial-off-the-shelf video or camera components and state-of-the-art microwave(radar) systems with sophisticated software that will not only provide more effective enforcement through effective evidentiary information, but will also enable predictive actions based on vehicle and pedestrian be ...

    SBIR Phase I 2013 Department of Transportation
  2. Improved Decision Support Tools for State of Good Repair

    SBC: VIASIM            Topic: 131FT2

    Every asset ages. Pipes, roads, computers, cars, etc. This fact is inevitable. And, as a result of the aging process, every asset suffers a degradation in its intended capability or performance over time. Yet every day, millions of people in the U.S. get up in the morning expecting that they will be able to travel to work, drink clean water, use the Internet, and so on. It usually takes a catastro ...

    SBIR Phase I 2013 Department of Transportation
  3. A Quantitative Non-destructive Residual Stress Assessment Tool for Pipelines

    SBC: Generation 2 Materials Technology Llc            Topic: 111PH2

    There exists a wide-range need in both industry and government for quantitative residual stress measurements. Generation 2 Materials Technology LLC (G2MT) will collaborate with partners from industry and government to calibrate and commercialize the eStress system to assess residual stress from mechanical damage and re-rounding. The industrial members, consortiums, and government laboratories who ...

    SBIR Phase II 2012 Department of Transportation
  4. Intelligent Dimension Evaluation and Alerting System (IDEAS)

    SBC: INTERNATIONAL ELECTRONIC MACHINES CORPORATION            Topic: 111FH3

    Low or narrow bridges are often hit by legal-sized commercial vehicles and oversize vehicles often strike regulation bridges. In both cases the accidents result in extensive property damage, possible personal injuries and even death, and increased traffic congestion. Past attempts to warn drivers of risks for bridge hits have failed due to inaccurate measurement, high rates of false alarms, or s ...

    SBIR Phase II 2012 Department of Transportation
  5. Transportation Autonomous Device

    SBC: INTERNATIONAL ELECTRONIC MACHINES CORPORATION            Topic: 101FR4

    Job related injuries cost the railroads over $1 billion annually and from 2005 through 2008 30.3% of those injuries occurred in the rail yard. A majority of the accidents were attributed to slips, trips and falls from the worker slipping on ballast or tripping on other trackside objects. IEM is developing a Transportation Autonomous Device that may be configured to work autonomously, with a remote ...

    SBIR Phase II 2012 Department of Transportation
  6. Dynamic Non-Contact 3D Measurement System for Rollover Testing

    SBC: Photon-x, Inc.            Topic: 07NH2

    During Phases I and II, Photon-X successfully demonstrated the feasibility of applying its patented Spatial Phase Imaging technology to the problem of non-contact 3D imaging during a rollover test and delivered a viable prototype system. During Phase IIB, Photon-X will continue to refine the system in preparation for commercialization. Photon-X will use this opportunity to add an additional camer ...

    SBIR Phase II 2012 Department of Transportation
  7. Three Dimensional Coordinate Measurement System- For Driver Hand Position Monitoring

    SBC: INTERNATIONAL ELECTRONIC MACHINES CORPORATION            Topic: N/A

    While the applications of a three dimensional coordinate measurement system are diverse, such a system will be particularly useful in reporting driver hand position and head movement coordinates. The coordinate information is used to evaluate driver behavior and performance in the new generation of instrumented vehicles where the driver engages in manipulation of specific equipment. Having devel ...

    SBIR Phase I 1996 Department of Transportation
  8. Effective and Efficient GIS Use in Transportation Planning Using an Integrated Vector and Raster System and Pseudo English as a Programming Language

    SBC: Susquehanna Resources And            Topic: N/A

    N/A

    SBIR Phase II 1996 Department of Transportation
  9. Field Energy Recoil Emission Technology (FERET)

    SBC: Invocon, Inc.            Topic: N/A

    Passenger safety concerns have prompted the FAA to elicit energy-sensitive neutron detectors which do not rely on the time-of-flight method and are suitable for use in explosive detection systems. Invocon, Inc. proposes to design an inspection system consisting of an energy source and a detector. Designated FERET sytem, (Field Energy Recoid Emission Technology), it would detect substances identi ...

    SBIR Phase I 1996 Department of Transportation
  10. COMPUTER-BASED PAVEMENT DISTRESS INDENTIFICATION SYSTEM

    SBC: Brent Rauhut Engineering Inc.            Topic: N/A

    N/A

    SBIR Phase I 1993 Department of Transportation

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government