You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Pedestrian Auto Enforcement Program (PAEP)

    SBC: POLARIS SENSOR TECHNOLOGIES INC            Topic: 122FH3

    We propose an innovative Pedestrian Automotive System for Enforcement and Safety (PASES) that combines commercial-off-the-shelf video or camera components and state-of-the-art microwave(radar) systems with sophisticated software that will not only provide more effective enforcement through effective evidentiary information, but will also enable predictive actions based on vehicle and pedestrian be ...

    SBIR Phase I 2013 Department of Transportation
  2. Improved Decision Support Tools for State of Good Repair

    SBC: TWILIGHT TRAINING, L.L.C.            Topic: 131FT2

    Every asset ages. Pipes, roads, computers, cars, etc. This fact is inevitable. And, as a result of the aging process, every asset suffers a degradation in its intended capability or performance over time. Yet every day, millions of people in the U.S. get up in the morning expecting that they will be able to travel to work, drink clean water, use the Internet, and so on. It usually takes a catastro ...

    SBIR Phase I 2013 Department of Transportation
  3. A Quantitative Non-destructive Residual Stress Assessment Tool for Pipelines

    SBC: Generation 2 Materials Technology Llc            Topic: 111PH2

    There exists a wide-range need in both industry and government for quantitative residual stress measurements. Generation 2 Materials Technology LLC (G2MT) will collaborate with partners from industry and government to calibrate and commercialize the eStress system to assess residual stress from mechanical damage and re-rounding. The industrial members, consortiums, and government laboratories who ...

    SBIR Phase II 2012 Department of Transportation
  4. Dynamic Non-Contact 3D Measurement System for Rollover Testing

    SBC: PHOTON-X, INC.            Topic: 07NH2

    During Phases I and II, Photon-X successfully demonstrated the feasibility of applying its patented Spatial Phase Imaging technology to the problem of non-contact 3D imaging during a rollover test and delivered a viable prototype system. During Phase IIB, Photon-X will continue to refine the system in preparation for commercialization. Photon-X will use this opportunity to add an additional camer ...

    SBIR Phase II 2012 Department of Transportation
  5. Field Energy Recoil Emission Technology (FERET)

    SBC: INVOCON, INC.            Topic: N/A

    Passenger safety concerns have prompted the FAA to elicit energy-sensitive neutron detectors which do not rely on the time-of-flight method and are suitable for use in explosive detection systems. Invocon, Inc. proposes to design an inspection system consisting of an energy source and a detector. Designated FERET sytem, (Field Energy Recoid Emission Technology), it would detect substances identi ...

    SBIR Phase I 1996 Department of Transportation
  6. Electrical Ground Loops in Heavy Trucks

    SBC: Vehicle Enhancement Systems,            Topic: N/A

    The number of electrical/electronic devices in heavy-duty vehicles are increasing rapidly. Many of these devices require a "clean" source of power, which may theoretically be supplied by a separate ground. Currently, tractors operate on one of three grounding methods, the frame ground being the most common. However, the introduction of a separate ground into the trailer could lead to serious gr ...

    SBIR Phase I 1996 Department of Transportation
  7. COMPUTER-BASED PAVEMENT DISTRESS INDENTIFICATION SYSTEM

    SBC: Brent Rauhut Engineering Inc.            Topic: N/A

    N/A

    SBIR Phase I 1993 Department of Transportation
  8. MULTIVORTEX COLLECTOR OF EXPLOSIVE AGENTS

    SBC: Energy Innovations, Inc.            Topic: N/A

    THE OBJECTIVE IS A COMPACT, RELIABLE AND INEXPENSIVE METHOD FOR SAMPLING LARGE VOLUMES OF AIR RAPIDLY TO DETERMINE THE CONCENTRATION OF AIRBORNE EXPLOSIVES. THE APPROACH INVOLVES THE USE OF A MULTIVORTEX PRECIPITATOR CAPABLE OF EFFICIENTLY REMOVING FINE PARTICULATES AND LARGE MOLERCULES FROM THE AIR AND COLLECTING THEM FOR CONVENIENT ANALYSIS. DURING PHASE I, A PROTOTYPE WILL BE TESTED FOR COLLECT ...

    SBIR Phase I 1993 Department of Transportation
  9. NEURAL NETWORK LANE CHANGE DETECTOR

    SBC: Exodyne Technologies, Inc.            Topic: N/A

    N/A

    SBIR Phase II 1993 Department of Transportation
  10. IMPROVED RADIATION DETECRTOR: THE MULTI-DIMENSIONAL NEUTRON RADIOMETER

    SBC: Tensor Technology Inc.            Topic: N/A

    THIS PROPOSAL IS TO DETERMINE THE SPATIAL RESOLUTION OF A NEW TYPE OF MULTI-DIMENSIONAL X-Y DETECTOR WHICH PROVIDES THE POSITION IN AN X-Y PLANE OF NEUTRAL PARTICLE INTERACTIONS FOR USE IN AIRPORT SECURITY SYSTEMS FOR INSPECTION OF SEALED LUGGAGE.

    SBIR Phase I 1993 Department of Transportation
US Flag An Official Website of the United States Government