Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Broad Spectrum Absorption-Fluorescence Method for Determining Adsorption Capacity of Fly Ash

    SBC: PHOSPHORTECH            Topic: 171FH1

    Interference of unburned and activated carbon in fly ash with air-entraining admixtures (AEA’s) in fresh concrete mixtures is a major concern in the concrete industry. Therefore, a rapid and accurate measurement of adsorption capacity of fly ash is of great interest to this industry. In this project, a new method is suggested, which can qualitatively and quantitatively measure different surfact ...

    SBIR Phase I 2017 Department of Transportation
  2. A Robust Compact Portable Instrument Package for the Complete Spatiotemporal Measurement of a Single Ultrashort Laser Pulse

    SBC: Swamp Optics, LLC            Topic: N171085

    We will develop a simple, lightweight, compact, robust, and inexpensive instrument package that will report essentially all ultrashort-laser-pulse characteristics. It will yield, on a single shot, the pedestal power and complete pulse spatiotemporal field, E(x,y,z,t)i.e. all possible pulse information, including pulse-shape stability, even if multi-shot operation is required. It will include user- ...

    SBIR Phase I 2017 Department of DefenseNavy
  3. Advanced Silicon Diode Switch for HPRF Systems

    SBC: Radiation Detection Technologies, Inc.            Topic: N15AT023

    The ultimate goal of the phase II effort is to build Si-based PCSS 10kV-modules and compare coupling of those modules to different microwave radiation technologies. The microwave radiating technologies include at least non-linear transmission lines and direct drive antenna; comparisons and system-level tradeoffs will be identified through normalized field measurements.

    STTR Phase II 2017 Department of DefenseNavy
  4. Electrochemical Modeling of Anodic Metal-Rich Primers

    SBC: Corrdesa, LLC            Topic: N162129

    We propose a methodology for modeling and computationally optimizing anodic metal-filled primers using extensions of approaches that we already employ for corrosion analysis. Modeling will be developed using Star CCM+, a Computer Aided Engineering (CAE) platform from CD-Adapco. We presently use this for corrosion analysis when we need to incorporate computational fluid dynamics to take the variab ...

    SBIR Phase I 2017 Department of DefenseNavy
  5. VERIFICATION OF STEEL PLACEMENT IN PORTLAND CEMENT CONCRETE USING SHORT-PULSE RADAR TECHNIQUES

    SBC: Bomar Associates Inc.            Topic: N/A

    THERE IS A NEED FOR A RAPID, NON-DESTRUCTIVE METHOD TO TEST FOR PROPER STEEL PLACEMENT IN PORTLAND CEMENT PAVEMENTS. ISTHE GOAL OF THIS PROPOSED PROGRAM TO DEMONSTRATE THE FEASIBILITY OF USING SHORT-PULSE, GROUND-PENETRATING RADAR AS A MEANS OF RAPID STEEL LOCATION IN CONCRETE PAVEMENT. A GENERAL BACKGROUND IN GROUND-PENETRATING RADAR THEORY IS PRESENTED. LABORATORY AND FIELD MEASUREMENTS USING A ...

    SBIR Phase II 1990 Department of Transportation
  6. INDEPENDENT ENGINEERING ANALYSIS OF PROPOSED AH-1W HELICOPTER FOUR-BLADED MAIN ROTOR DEVELOPMENT

    SBC: GUIDED SYSTEMS TECHNOLOGIES, INC.            Topic: N/A

    THE U.S. MARINE CORP REQUIRES AN INDEPENDENT ENGINEERING ANALYSIS OF THE PERFORMANCE AND OPERATIONAL COST-BENEFITS OF FOUR BLADED MAIN ROTOR DEVELOPMENT FOR THE AH-1W ATTACK HELICOPTER. THE PROPOSED PHASE I EFFORT IS DESIGNED TO SATISFY THIS REQUIREMENT BY FIRST GATHERING APPROPRIATE ENGINEERING DATA ON BOTH THE BASELINE CONFIGURATION AND THE PROPOSED FOUR-BLADED MAIN ROTOR SYSTEM, DEVELOPING SUIT ...

    SBIR Phase I 1990 Department of DefenseNavy
  7. ADVANCED ARMAMENT CARRIAGE FOR THE MARINE CORPS AH-1W ATTACK HELICOPTER

    SBC: GUIDED SYSTEMS TECHNOLOGIES, INC.            Topic: N/A

    THE U.S. MARINE CORPS HAS A CRITICAL NEED FOR A NEW, STATE-OF-THE-ART SYSTEM FOR ARMAMENT CARRIAGE ON ITS AH-1W ATTACK HELICOPTER. THIS PHASE I EFFORT WILL PERFORM A TRADE/CONCEPTUAL DESIGN STUDY TO SYSTEMATICALLY IDENTIFY THE BEST DESIGN SOLUTION. THE MERITS, COSTS, AND RISKS ASSOCIATED WITH AN INNOVATIVE DESIGN SOLUTION (CONFORMAL WEAPONS PODS) WILL BE COMPARED TO MORE CONSERVATIVE DESIGN SOLUTI ...

    SBIR Phase I 1990 Department of DefenseNavy
  8. MULTISPECTRUM GUIDANCE TARGET GENERATORS

    SBC: Millimeter Wave Technology,            Topic: N/A

    THE CURRENT METHODOLOGY OF MULTISPECTRAL HARDWARE-IN-THE-LOOP (HWIL) TARGET SIMULATION IS TO MECHANICALLY POSITION AN IR/RF TARGET HEAD VIA A ROBOT, FOR INSTANCE, LOCATED IN A LARGE ANECHOIC CHAMBER. THE TARGET HED INCLUDES AN IR POINT SOURCE PLUS A THREE (OR FOUR) ELEMENT ANTENNA ARRAY TO SIMULATE TARGET RADAR RETURN, INCLUDING EFFECTS OF GLNT AND DISTRIBUTED TARGETS. THE SEEKER-UNDER-TET (SUT) I ...

    SBIR Phase I 1990 Department of DefenseNavy
US Flag An Official Website of the United States Government