Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Broad Spectrum Absorption-Fluorescence Method for Determining Adsorption Capacity of Fly Ash

    SBC: PHOSPHORTECH            Topic: 171FH1

    Interference of unburned and activated carbon in fly ash with air-entraining admixtures (AEA’s) in fresh concrete mixtures is a major concern in the concrete industry. Therefore, a rapid and accurate measurement of adsorption capacity of fly ash is of great interest to this industry. In this project, a new method is suggested, which can qualitatively and quantitatively measure different surfact ...

    SBIR Phase I 2017 Department of Transportation
  2. III-Nitride Ternary Alloy Substrates for Next Generation UV Optoelectronics and Power Electronics

    SBC: Innovative Advanced Materials, Inc.            Topic: AF17AT024

    Innovative Advanced Materials (IAM), Inc., founded by Dr. W. Alan Doolittle, proposes to develop a new generation of bulk synthesis tools operating at significantly higher pressure than current prototype systems which already demonstrate tantalizing material quality and high growth rates with proven alloy and dopant control capability to produce AlGaN substrates with remarkably low cost and high q ...

    STTR Phase I 2017 Department of DefenseAir Force
  3. A MODULAR, EXPANDABLE, LOW COST MBE SYSTEM FOR A NEW GENERATION OF EPITAXY

    SBC: Innovative Advanced Materials, Inc.            Topic: AF16AT25

    Innovative Advanced Materials (IAM), Inc., founded by MBE expert Dr. W. Alan Doolittle, has developed a new generation of MBE tools with revolutionary capability and remarkably lower cost than legacy tools and proposes to construct a prototype tool to demonstrate its power. The prototype tool will be delivered to AFRL for use in the growth of Gallium Oxide shattering current technical roadblocks c ...

    STTR Phase II 2017 Department of DefenseAir Force
  4. Advanced back-illuminated CMOS image sensors for adaptive optics applications

    SBC: SCIMEASURE ANALYTICAL SYSTEMS, INC.            Topic: AF171022

    An existing 128x128 pixel CMOS image sensor will be backthinned and anti-reflection coated with the goal of achieving a quantum efficiency of >80% at 570 nm without microlenses. Each die will be window-backthinned instead of fully backthinned and hybridiz

    SBIR Phase I 2017 Department of DefenseAir Force
  5. Automatic Dependent Surveillance- Broadcast (ADS-B) and UAS operations

    SBC: KALSCOTT ENGINEERING INC            Topic: AF171045

    A full-featured ADS-B unit for unmanned air vehicles is proposed. In addition to the ADS-B In/Out capability, several features which are customized for UAV operations are included. In Phase I, development of the features will be undertaken, along with pre

    SBIR Phase I 2017 Department of DefenseAir Force
  6. Manufacturing of High Permeability Materials by NanoSpray Combustion for RF Antennas

    SBC: Engi-Mat Co.            Topic: AF171100

    RF signal collection and wireless communications across many different frequency regimes require conformal antennas operating over extremely broad frequency ranges (~2 MHz to ~3 GHz). Traditional electronic circuits and radiating elements face significant

    SBIR Phase I 2017 Department of DefenseAir Force
  7. Microwave NDE for Tailpipe Coating Thickness Measurement

    SBC: COMPASS TECHNOLOGY GROUP, LLC            Topic: AF171103

    CTG proposes a field deployable diagnostic measurement system that meets the need for assessing operational readiness, while also being affordable. CTG achieves this goal with a ruggedized sensor combined with a low-cost, compact vector analyzer. The se

    SBIR Phase I 2017 Department of DefenseAir Force
  8. Air Launch Testbed for Endoatmospheric Hypersonic Trajectories

    SBC: Generation Orbit Launch Services, Inc.            Topic: AF141081

    ABSTRACT:This SBIR proposal covers the preliminary design and initial hardware and software in-the-loop testing of the GOLauncher 1, a single stage liquid air launched rocket system, for utilization in future hypersonic flight testing efforts. Major objectives include completing prelimianry design of the system based on requirements defined during Phase I, further validation of cost and schedule e ...

    SBIR Phase II 2017 Department of DefenseAir Force
  9. Prognostic Scheduling

    SBC: GLOBAL TECHNOLOGY CONNECTION, INC.            Topic: AF151167

    Global Technology Connection, Inc. in collaboration with their academic and industrial partners proposes a prognostic scheduling architecture called Scheduling Algorithms for Maintenance using Prognostic Life Estimates (SAMPLE) to address unschedule

    SBIR Phase II 2017 Department of DefenseAir Force
  10. Big Data Cyber Analytics

    SBC: Dynamite Analytics LLC            Topic: AF171042

    Vlabs will define an architecture for a big data cybersecurity solution that will provide a real-time, intuitive and actionable analytics for enhanced situational awareness and rapid response. The system will facilitate automation of key security decisions with a goal to accelerate the attack detection time of highly resourceful adversaries. The system will ingest and analyze various data types an ...

    SBIR Phase I 2017 Department of DefenseAir Force
US Flag An Official Website of the United States Government