You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Liquid-cooled actuation to achieve greater degrees of freedom and range of motion in untethered exoskeletons

    SBC: APPTRONIK INC            Topic: H6018135

    Apptronik Systems Inc., in cooperation with the University of Texas Human Centered Robotics Lab (HCRL) and Huston-Tillotson University Robotics Lab (a historically black college and university HBCU), endeavor to advance the movement capabilities and modularity of the exoskeleton being developed under contract #H92222-17-C-0050. The primary goal of this program is to optimize the range of movement ...

    STTR Phase II 2017 Department of DefenseSpecial Operations Command
  2. First Shot Mortar System

    SBC: LYNNTECH INC.            Topic: SOCOM172006

    Mortar systems are widely used within the Special Operations Force to provide organic fire support. Traditionally, due to inaccuracies in estimates of orientation, position, and environmental parameters, the first mortar fired has been unlikely to produce effects on target and is used to determine the required correction for subsequent salvos. While estimates of the enemys position have become inc ...

    SBIR Phase I 2017 Department of DefenseSpecial Operations Command
  3. High Accuracy Mortar Fire Control System

    SBC: PRECISION TARGETING, LLC            Topic: SOCOM172006

    The proposed system will be capable of being tube mounted on the 60/81/120mm mortar tubes for the measuring of the barrel elevation and cant angles and will provide a firing solution, elevation and azimuth angle, required to impact the target at the range input by the user. The range to the target can be directly entered by the user, read from a fielded laser range finder (VECTOR, PLRF, etc), or c ...

    SBIR Phase I 2017 Department of DefenseSpecial Operations Command
  4. Development of Innovative Welding for High Performance Bridge Steel

    SBC: KAI, LLC            Topic: 132FH1

    With this research, we would like to provide new materials joining methods to the DOT. This will be achieved with a pulse energy store that has already demonstrated game changing capability in welding a wide variety of metals and alloys. The process we are proposing is known as Homopolar Welding. The weld is created by a solid state fusion welding process whereby high current is passed through the ...

    SBIR Phase II 2017 Department of Transportation
  5. Broad Spectrum Absorption-Fluorescence Method for Determining Adsorption Capacity of Fly Ash

    SBC: PHOSPHORTECH CORP            Topic: 171FH1

    Interference of unburned and activated carbon in fly ash with air-entraining admixtures (AEA’s) in fresh concrete mixtures is a major concern in the concrete industry. Therefore, a rapid and accurate measurement of adsorption capacity of fly ash is of great interest to this industry. In this project, a new method is suggested, which can qualitatively and quantitatively measure different surfact ...

    SBIR Phase I 2017 Department of Transportation
  6. Resilient Wayside Structures and Passenger Car Survivability

    SBC: PROTECTION ENGINEERING CONSULTANTS LLC            Topic: 171FR3

    Additional passenger fatalities and injuries can occur during derailments due to interaction with wayside structures, such as catenary poles, bridge abutments, and discontinuities in third rails at highway grade crossings. Resilient wayside structures can reduce these risks, by lessening the amount of intrusion, penetration, and passenger motion. PEC and Arup will work together to develop resilien ...

    SBIR Phase I 2017 Department of Transportation
  7. Environmentally Stable Portable PoC Blood Analysis Device

    SBC: LYNNTECH INC.            Topic: SOCOM16002

    A shared objective in Combat Casualty Care and in Prolonged Field care is to overcome the different challenges posed by conducting of operations under austere conditions. This can be achieved in part by providing capable and functional diagnostic and treatment methods for use at the point of injury. The research described in this proposal addresses the urgent need for an improved blood analysis ...

    SBIR Phase II 2017 Department of DefenseSpecial Operations Command
  8. Nanomaterials-Based Moisture Transport Pathway Treatments towards Textiles with Improved Moisture Management and Comfort

    SBC: LYNNTECH INC.            Topic: SOCOM17002

    Special Operations Force operators are often subjected to physically challenging conditions under varying environmental extremes. Efficient body temperature regulation, proper heat stree management, as well as adequate soldier comfort level are keys to enhanced warfighter performance and continued mission success. While textile fabrics used in US military uniforms have multiple favorable propert ...

    SBIR Phase I 2017 Department of DefenseSpecial Operations Command
  9. Liquid cooled viscoelastic actuation for robust legged robot locomotion

    SBC: APPTRONIK INC            Topic: H601

    Apptronik Systems in cooperation with the University of Texass Human Centered Robotics Lab (HCRL), Carnegie Mellon Universitys Robotics Institute and Italys National Research Institute (CNR), will collaborate to develop a new type of exoskeleton that is founded upon Apptroniks Visco-Elastic Liquid Cooled Actuator (VLCA). The fundamental goal of this program is the development of a powered exoskel ...

    STTR Phase II 2017 Department of DefenseSpecial Operations Command
  10. Upper Body Addendum to Proposal S2-0328

    SBC: APPTRONIK INC            Topic: H601

    This is an Addendum to previously submitted proposal that includes the addition of a powered upper body portion of an exoskeleton. In this addendum we propose the additional requirements of researching, fabricating and integrating a powered upper body to the previously outlined lower body. These two systems together will comprise the entire exoskeleton proposed by the contractor. Through this ...

    STTR Phase II 2017 Department of DefenseSpecial Operations Command
US Flag An Official Website of the United States Government