List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

Displaying 1 - 10 of 3328 results
  1. Dual Plane 3D Compton Scattering Imager with Pixelated CZT Detectors for 1-10MeV Gamma Ray

    SBC: H3D            Topic: NA

    A dual plane Compton imager prototype system with large volume pixelated CZT detectors will be built for spectrally resolved MeV gamma ray tomographic applications. These two planes will be operated at independent clocks and they will be synchronized via a common periodical pulse. The common periodical pulse is self-generated so it does not rely on external pulse generator. Each detector will be c ...

    SBIR Phase I 2018 Department of CommerceNational Institute of Standards and Technology
  2. IF Conversion System for High-Bandwidth Multiplexed Sensors Arrays

    SBC: Alphacore, Inc.            Topic: NA

    Alphacore will develop an Intermediate Frequency (IF) Conversion System for High-Bandwidth Multiplexed Sensors Arrays for NIST’s 2018 solicitation for Exploratory Measurement Science Topic 9.04.02.68. The proposing team has already successfully developed and evaluated a similar printed-circuit board (PCB)-based system for NIST (ROACH2 BLAST-TNG, refer section 1.2). The goal in Phase I is therefo ...

    SBIR Phase I 2018 Department of CommerceNational Institute of Standards and Technology
  3. Leveraging Cyber Security Framework to Identify the SP 800 53 Security and Privacy Controls for Cloud‐based Information Systems

    SBC: INFOBEYOND TECHNOLOGY, LLC            Topic: NA

    NIST developed information system risk management and guidelines that assist agencies in implementing integrated, organization‐wide programs to manage information security risk, and further developed Cloud Security Assessment Tool (CSAT) to facilitate in this matter. However, NIST’s CSAT needs further improvement and implementation of new functions such that it can be commercialized as an ente ...

    SBIR Phase I 2018 Department of CommerceNational Institute of Standards and Technology
  4. Multimode Chiroptical Spectrometer for Nanoparticle Characterization

    SBC: Applied Nanofluorescence LLC            Topic: NA

    This project will develop a new scientific instrument optimized for the advanced characterization of near-infrared fluorescent nanoparticles that can exist as left- or right-handed structures (enantiomers). Single-walled carbon nanotubes (SWCNTs) are currently the leading example of such nanomaterials. Applied NanoFluorescence, LLC (ANF) proposes a novel multi-mode chiroptical spectrometer that ca ...

    SBIR Phase I 2018 Department of CommerceNational Institute of Standards and Technology
  5. Secure Role-Based System for Distributed Network Measurement

    SBC: POLLERE, INC.            Topic: NA

    Network measurement is a critical element in networks but it has largely been an afterthought and inadequately secured. With the emergence of Information-Centric Networking technologies, specifically the popular open source Named-Data Networking (NDN), there is the early stage opportunity to create a useful and flexible network measurement system that can accommodate a range of network probes. Thi ...

    SBIR Phase I 2018 Department of CommerceNational Institute of Standards and Technology
  6. Self-Configuring Residential Conditioned Air Zoning System for Low Energy Homes

    SBC: Steven Winter Associates, Inc.            Topic: NA

    Steven Winter Associates, Inc. (SWA) hereby proposes to undertake research to develop a self-configuring residential conditioned air zoning system for low load energy homes. The Phase I prototype will feature zone nodes and a master controller. The zone nodes will measure and wirelessly report environmental conditions to the central controller, and modulate a damper based on commands received from ...

    SBIR Phase I 2018 Department of CommerceNational Institute of Standards and Technology
  7. TheSieve

    SBC: Cyber Point International, LLC            Topic: NA

    We propose to create an advanced forensic analysis tool called TheSieve. This tool will use machine learning techniques that can classify files as malicious or benign as well as suggesting files for closer inspection. Built upon custom enhancements to the National Software Reference Library (NSRL), TheSieve will allow forensic investigators to spend theirvaluable time examining the most significan ...

    SBIR Phase I 2018 Department of CommerceNational Institute of Standards and Technology
  8. Measuring the Concentration of Host-cell Proteins in Biomanufacturing Using Silicon Nanowire Array Sensors

    SBC: Advanced Silicon Group            Topic: NA

    Our innovation is a low cost, sensitive, quantitative biosensor that can detect many biomarkers on the same chip. Our sensor consists of vertically aligned silicon nanowires. The silicon nanowires’ high surface area to volume ratio makes them sensitive to the environment around them and can thus lead to high sensitivity detection. Each of the nanowires can be functionalized to be sensitive to ei ...

    SBIR Phase I 2018 Department of CommerceNational Institute of Standards and Technology
  9. Manufacturing Data Compiler for Visualization Based on Engineering-Driven Machine Learning

    SBC: OG Technologies, Inc.            Topic: NA

    There has been substantial development in data analytics. However, the complex mathematical formulation of “big data analytics” is difficult to populate in general manufacturing plants. There is a need for an SPC-like tool to enable the acceptance of the advanced data analytics and its visualization. The MD Compiler, a tool to bridge the gap between data available and the information demanded ...

    SBIR Phase I 2018 Department of CommerceNational Institute of Standards and Technology
  10. Continuous Learning for Additive Manufacturing Processes Through Advanced Data Analytics

    SBC: Senvol LLC            Topic: NA

    Additive manufacturing (AM) is a promising manufacturing technique for end-use parts that can solve challenges for American manufacturers in many industries, e.g. aerospace, defense, automotive, energy, and healthcare. However, despite the potential that AM offers, the rate of AM adoption in industry is very slow. This is because AM suffers from low repeatability and quality consistency issues, wh ...

    SBIR Phase I 2018 Department of CommerceNational Institute of Standards and Technology

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government