You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Manufacturing Methods for Sulfur Concrete Sewer Pipe

    SBC: Brimstone Pipe Company            Topic: N/A

    This Phase I research is intended to evaluate the feasibility of manufacturing low-cost, acid-resistant sanitary sewer pipe from sulfur concrete. Sulfur is an abundant mineral recovered from coking, natural gas processing, and petroleum refining. Secondary recovery of sulfur, resulting from environmental regulation, produces more material than is needed by U.S. industry. The U.S. Bureau of Mines ...

    SBIR Phase I 1997 Environmental Protection Agency
  2. Electromagnetic Coupling to Satellite Cavities

    SBC: ADVANCED ELECTROMAGNETICS            Topic: N/A

    The proposed research combines an innovative eigenvector method with other electromagnetic techniques to produce a hybrid approach towards solving the EM coupling to satellite cavity problem. The physical structure is divided into an exterior region and one or more interior regions. The exterior region is modeled with method of moments (MOM) and or hybrids of MOM with the uniform theory of diffr ...

    SBIR Phase II 1997 Department of DefenseAir Force
  3. Powder Injection Molding Processing Using Corn-based Biopolymers

    SBC: 8VA Corporation            Topic: N/A

    This program proposes to replace petroleum-based chemicals with formulations that are less expensive and safer to use in the environment. Critical to this goal is the incorporation of biopolymer additives require as binders for powder injection molding. Water soluble, cellulose-based polymers that have been processed from wood and cotton are also useful as binders in various ceramic manufacturin ...

    SBIR Phase II 1997 Department of DefenseArmy
  4. Nuclear Weapons Effects Phenomenology

    SBC: Applied Physics Technologies            Topic: N/A

    The nuclear weapons community has traditionally focused on the next generation or level of weapon capability complimented by gathering and analysis of actual test data. Now, with the cessation of actual weapons testing, there is an increased need to use the actual test data in modeling techniques to better understand the phenomenology and potential effects of nuclear weapons. The first phase of ...

    SBIR Phase I 1997 Department of DefenseDefense Threat Reduction Agency
  5. Interface-Driven Multidisciplinary Design of Large-Scale Aircraft Structures

    SBC: Applied Research Associates, Inc.            Topic: N/A

    Under the proposed research an Interface-Driven Design Manager (IDM) for CAD packages will be developed to greatly reduce the design cycle time for aircraft structures. The IDM represents a first attempt to fully integrate powerful new interface element and design management technologies into the CAD environment. These emerging technologiies have the potential for making multidisciplinary design ...

    SBIR Phase II 1997 Department of DefenseAir Force
  6. Armament Research

    SBC: Applied Research Associates, Inc.            Topic: N/A

    Recent efforts in the target vulnerability community (fixed ground targets, mobile ground targets, and aircraft) have focused on enhancing the blast and fragmentation modeling from weapon detonations. This includes modeling propagation of the detonation effects from the weapon through their interaction with the target geometry, to the development of loads on and response of the target structure. ...

    SBIR Phase I 1997 Department of DefenseAir Force
  7. Engineering Models of Reactive Munitions and Damage Effects

    SBC: Applied Research Associates, Inc.            Topic: N/A

    Warhead design calculations and weapons effectiveness estimates require a methodology to predict structural response and the associated damage to air targets from reactive munitions. The objectives for the proposed Phase I study effort are to develop candidate launch conditioning, reaction initiation and reaction rate methodology, to incorporate existing ballistic, blast and quasi-static pres ...

    SBIR Phase I 1997 Department of DefenseNavy
  8. Laser Turbulence Measurements in the LB/TS

    SBC: Applied Research Associates, Inc.            Topic: N/A

    Turbulence of gas flows by its very nature is one of the most difficult things to model and measure. We propose to develop a new way of measuring the turbulence and to compare these measurements to predictions using the k-epsilon model. Typical measurements, in the past, use smoke, Schlierin or shadow graph techniques to visually infer turbulence characteristics. These features are either motio ...

    SBIR Phase I 1997 Department of DefenseDefense Threat Reduction Agency
  9. Slipper Wear/Gouging Phenomena

    SBC: Applied Research Associates, Inc.            Topic: N/A

    The objective of this work is to develop analytical techniques to characterize wear and gouging phenomena of slippers at speeds up to hypersonic and demonstrate means to evaluate or reduce slipper wear/gouging. Specifically, we will develop analytical techniques that can be used to predict slipper wear patterns and gouging phenomena throughout the sled velocity regime to Mach 10. This will inclu ...

    SBIR Phase I 1997 Department of DefenseAir Force
  10. Unique Selected Area Deposition o Copper Onto Aluminum for Multichip Module Applications

    SBC: Brewer Science Incorporated            Topic: N/A

    The inability to deposit copper directly onto aluminum is a longstanding problem in microelectronic manufacturing. Presently, aluminum must be coated with a barrier layer such as TiN to promote copper adhesion and provide good electrical contact between the two metals. This work will demonstrate a nonaqueous galvanic process for selectively depositing a highly adherent copper coating directly o ...

    SBIR Phase I 1997 Department of DefenseAir Force
US Flag An Official Website of the United States Government