List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

Displaying 1 - 10 of 15621 results
  1. Nanoengineered Hybrid Gas Sensors for Spacesuit Monitoring

    SBC: N5 SENSORS INC            Topic: T6.01

    Extravehicular Mobility Units (EVU) are the necessary to perform elaborate, dynamic tasks in the biologically harsh conditions of space and they have stringent requirements on physical and chemical nature of the equipment/components/processes, to ensure safety and health of the individual require proper functioning of its life-support systems. Monitoring the Portable Life Support System (PLSS) of ...

    STTR Phase II 2017 National Aeronautics and Space Administration
  2. Metal Digital Direct Manufacturing (MDDM) for Close-Out of Combustion Chambers and Nozzle Fabrications

    SBC: Keystone Synergistic Enterprises, LLC            Topic: T12.04

    This NASA sponsored STTR project will investigate methods for close-out of large, liquid rocket engine, nickel or stainless steel nozzle, coolant channels utilizing robotic laser and pulsed-arc additive manufacturing (AM)methods. Structural jacket to coolant channel land area interface strength will be quantified and metallurgical characterization completed. Process optimizations will be conducte ...

    STTR Phase II 2017 National Aeronautics and Space Administration
  3. Wideband Autonomous Cognitive Radios for Networked Satellites Communications

    SBC: BLUECOM SYSTEMS AND CONSULTING LLC            Topic: T5.01

    Wideband Autonomous Cognitive Radios (WACRs) are advanced radios that have the ability to sense state of the RF spectrum and the network and self-optimize its operating mode in response to this sensed state. During the just finished Phase I STTR project, Bluecom Systems was able to develop a comprehensive design for realizing such a WACR and demonstrate the proof-of-concept operation in a hardware ...

    STTR Phase II 2017 National Aeronautics and Space Administration
  4. NLV Upper Stage Development and Flight Testing

    SBC: Garvey Spacecraft Corporation            Topic: T1.01

    Our Phase I results include a preliminary design for an advanced nanosat launch vehicle (NLV) upper stage that features several advanced propulsion technologies, as well as extensive empirical data from a series of pathfinding operations conducted at both the Pacific Spaceport Complex - Alaska on Kodiak Island and the Poker Flat Research Range. For Phase II, we are taking major steps, such as bui ...

    STTR Phase II 2017 National Aeronautics and Space Administration
  5. Dynamic Flight Simulation Utilizing High Fidelity CFD-Based Nonlinear Reduced Order Model

    SBC: Zona Technology, Inc            Topic: A1.01

    The Nonlinear Dynamic Flight Simulation (NL-DFS) system will be developed in the Phase II project by combining the classical nonlinear rigid-body flight dynamics model with an add-on nonlinear aeroelastic solver to compute the airframe response due to pilot input command and to identify the key aeroelastic coupling mechanisms between the structural dynamics and unsteady aerodynamics with classic r ...

    SBIR Phase II 2017 National Aeronautics and Space Administration
  6. Manufacturing For Design of Titanium Alloys

    SBC: TRANSITION45 TECHNOLOGIES, INC.            Topic: A1.01

    This SBIR Phase I program proposes to exploit the tremendous benefits that could be offered by the development of a microstructural refinement and control technology for titanium alloys. A severe plastic deformation (SPD) technology based on hot die isothermal forging technologies will be explored in this work. The goal is to demonstrate a practical, production level manufacturing approach to prod ...

    SBIR Phase I 2017 National Aeronautics and Space Administration
  7. Fast Response, Fiber-Optic Micromachined Five-Hole Probe for Three-Dimensional Flow Measurements in Harsh Environments

    SBC: Interdisciplinary Consulting Corporation            Topic: A1.08

    The Interdisciplinary Consulting Corporation (IC2) proposes the development of a fiber-optic, micromachined five-hole probe for three-dimensional flow measurements in harsh environments. The goal of this research is to develop a microelectromechanical systems (MEMS) based, optical probe capable of significantly improved performance compared to existing available sensors, by enabling faster respons ...

    SBIR Phase I 2017 National Aeronautics and Space Administration
  8. Aircraft Chemical Sensor Arrays for Onboard Engine and Bleed Air Monitoring

    SBC: MAKEL ENGINEERING, INC.            Topic: A2.01

    Makel Engineering Inc. (MEI) is developing flight capable chemical microsensor arrays for in situ monitoring of high temperature bleed air and turbine exhaust in jet engines. The proposed chemical sensor probes will be a new class of onboard engine instrumentation for real time monitoring engine and bleed air system operation in flight. Sensor arrays developed by MEI have been demonstrated for gro ...

    SBIR Phase II 2017 National Aeronautics and Space Administration
  9. Windhover Unmanned Aircraft Systems (UAS) Software Ecosystem

    SBC: Windhover Labs            Topic: A2.02

    The safety of Unmanned Aircraft Systems (UAS) flights is currently the responsibility of the pilot who is required to keep the vehicle within their line of sight (LoS). However, many UASs are capable of increasingly autonomous operation. As autonomy pushes against this boundary it is inevitable that the LoS requirement must be replaced with onboard intelligence to sense and avoid trouble without ...

    SBIR Phase II 2017 National Aeronautics and Space Administration
  10. Autonomous Contingency Detection and Reaction for Unmanned Aircraft

    SBC: Near Earth Autonomy, Inc.            Topic: A2.02

    Unmanned Aircraft Systems (UAS) operating in the national airspace system (NAS) have the potential to significantly impact modern society. It is now common to consider UAS for difficult and dangerous tasks such as fire fighting and dull tasks such as surveying crops. In addition, the autonomous elements from such UAS are being considered as a means to provide safe personal aviation. Open questions ...

    SBIR Phase II 2017 National Aeronautics and Space Administration

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government