For best search results, use the search terms first and then apply the filters

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Rapid, Low-Cost, Reformable Tooling for Prototyping and Short-run Manufacturing of Advanced Composite Structures

    SBC: 2PHASE TECHNOLOGIES, INC.            Topic: MDA03049

    The proposing company's reformable, reusable tooling can substantially reduce the time, cost and effort associated with conventional or alternative tooling while providing the flexibility for prototyping iterations, short-run or low rate manufacture through lengthy product cycles. This Phase II project addresses the use of reformable tooling materials and tooling systems for the production of prot ...

    SBIR Phase II 2004 Department of DefenseMissile Defense Agency
  2. Field-deployable, Reformable Tooling System for Repair, Replacement or Prototyping of Composite Structures

    SBC: 2PHASE TECHNOLOGIES, INC.            Topic: A03045

    The use of reformable, reusable tooling can greatly reduce the time, cost and skills required for conventional tooling production, and no waste products are generated since the tooling materials themselves can be rapidly cycled from a hard tooling-capable state to a liquid-like state and back to the tool-capable state. We are proposing to create a new, lightweight, rapid tooling system for proto ...

    SBIR Phase I 2004 Department of DefenseArmy
  3. Passive High Performance Heat Storage and Dissipation Technology for Transient High Power Thermal Management

    SBC: Advanced Cooling Technologies, Inc.            Topic: MDA04T010

    Advanced Cooling Technologies, Inc. (ACT), supported by the University of Nevada-Reno (UNR), proposes to develop a passive, high performance heat storage and dissipation technology for high power electronics and directed energy system applications. The proposed technology incorporates heat pipes for acquisition and dissipation of high heat fluxes and metal hydrides for storage of large transient h ...

    STTR Phase I 2004 Department of DefenseMissile Defense Agency
  4. Thermal Bus Technology for Next Generation Vehicles

    SBC: Advanced Cooling Technologies, Inc.            Topic: A03228

    The proposed SBIR program will develop a thermal bus technology for cooling of the next generation vehicles. The Phase I effort will demonstrate the feasibility and benefits of full or partial insertion of the technology into an Army vehicle platform. Trade studies and conceptual designs will be conducted to quantify the technology benefits. Subscale, proof-of-concept components testing will be co ...

    SBIR Phase I 2004 Department of DefenseArmy
  5. Advanced Thermo-Fluid Using Hybrid Nanoparticles

    SBC: DYNALENE INC.            Topic: OSD04EP8

    Due to the inefficiencies associated with Directed Energy (DE) weapons, a large amount of waste heat is generated that must be removed quickly to maintain a constant temperature operation. To remove such a high heat flux, an efficient heat transfer device/mechanism and a designer thermo-fluid are necessary. Nanofluids and Phase Change Materials (PCMs) have been developed to increase the thermophys ...

    SBIR Phase I 2004 Department of Defense
  6. Non-intrusive Multimodal Emotional State Monitoring

    SBC: VideoMining Corporation            Topic: SB032038

    This SBIR Phase I proposal will conduct an exploratory study to establish the feasibility of a multimodal framework for monitoring the emotion of a person using an non-intrusive sensor suite that includes video, audio, and thermal sensing. This will lead to the development of a portable gauge for robustly monitoring the emotional state of people in operational environments. The following five dyna ...

    SBIR Phase I 2004 Department of DefenseDefense Advanced Research Projects Agency
  7. Novel Approaches to Fabricate High Flux Density Magnetic Materials

    SBC: ADVANCED MATERIALS CORP.            Topic: N04158

    M19 grade silicon steel is the most commonly used soft magnet for a number of applications such as in the manufature of motors. Advanced Materials Corporation proposes to fabricate new, proprietary magnet compositions and bonded magnets employing novel processing techniques. The saturation induction is anticipated to exceed the M19 value by greater than 25%. Magnetic, electrical and mechanical pro ...

    SBIR Phase I 2004 Department of DefenseNavy

    SBC: 3TEX, Inc.            Topic: N022072

    3TEX will build on the results of the Phase I projects funded by ONR to develop multi-functional composite material systems designed to both carry structural loads and provide blast protection. The emphasis in this proposed phase II effort will be on all composite solutions not involving metallic foam and metal or ceramic hard face. Using a combination of design-build-test and numerical analysi ...

    SBIR Phase II 2004 Department of DefenseNavy
  9. Hybird 3-D Textile Gradient Density and Fluted Preforms for C-SiC Structural TPS

    SBC: 3TEX, Inc.            Topic: AF04033

    Thermal protection materials have been largely parasitic materials adhered to airframe structural materials beneath. Attachment of such disparate and largely non-load-bearing materials incurs weight penalties and encourages failures. Integrated preforms providing enhanced thermal management, improved shock resistance/integrity and thereby enable more efficient re-entry profiles. This project will ...

    SBIR Phase I 2004 Department of DefenseAir Force
  10. 3 Dimensional Nano-Scale Reinforcement Architecture for Advanced Composite Structures

    SBC: 3TEX, Inc.            Topic: AF04T020

    Three-dimensional woven and braided fiber architectures provide important advantages to composites, including suppression of delamination, high damage tolerance, improved through-the-thickness properties, simplicity and cost-effectiveness of manufacturing complex composite structural components. However, in order to diversify applications and reach high volumes of utilization of these materials in ...

    STTR Phase I 2004 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government