Award Data

The proposing company's reformable, reusable tooling can substantially reduce the time, cost and effort associated with conventional or alternative tooling while providing the flexibility for prototyping iterations, short-run or low rate manufacture through lengthy product cycles. This Phase II project addresses the use of reformable tooling materials and tooling systems for the production of prot ...

The use of reformable, reusable tooling can greatly reduce the time, cost and skills required for conventional tooling production, and no waste products are generated since the tooling materials themselves can be rapidly cycled from a hard tooling-capable state to a liquid-like state and back to the tool-capable state. We are proposing to create a new, lightweight, rapid tooling system for proto ...

Advanced Cooling Technologies, Inc. (ACT), supported by the University of Nevada-Reno (UNR), proposes to develop a passive, high performance heat storage and dissipation technology for high power electronics and directed energy system applications. The proposed technology incorporates heat pipes for acquisition and dissipation of high heat fluxes and metal hydrides for storage of large transient h ...

The proposed SBIR program will develop a thermal bus technology for cooling of the next generation vehicles. The Phase I effort will demonstrate the feasibility and benefits of full or partial insertion of the technology into an Army vehicle platform. Trade studies and conceptual designs will be conducted to quantify the technology benefits. Subscale, proof-of-concept components testing will be co ...

Due to the inefficiencies associated with Directed Energy (DE) weapons, a large amount of waste heat is generated that must be removed quickly to maintain a constant temperature operation. To remove such a high heat flux, an efficient heat transfer device/mechanism and a designer thermo-fluid are necessary. Nanofluids and Phase Change Materials (PCMs) have been developed to increase the thermophys ...

This SBIR Phase I proposal will conduct an exploratory study to establish the feasibility of a multimodal framework for monitoring the emotion of a person using an non-intrusive sensor suite that includes video, audio, and thermal sensing. This will lead to the development of a portable gauge for robustly monitoring the emotional state of people in operational environments. The following five dyna ...

M19 grade silicon steel is the most commonly used soft magnet for a number of applications such as in the manufature of motors. Advanced Materials Corporation proposes to fabricate new, proprietary magnet compositions and bonded magnets employing novel processing techniques. The saturation induction is anticipated to exceed the M19 value by greater than 25%. Magnetic, electrical and mechanical pro ...

3TEX will build on the results of the Phase I projects funded by ONR to develop multi-functional composite material systems designed to both carry structural loads and provide blast protection. The emphasis in this proposed phase II effort will be on all composite solutions not involving metallic foam and metal or ceramic hard face. Using a combination of design-build-test and numerical analysi ...

Thermal protection materials have been largely parasitic materials adhered to airframe structural materials beneath. Attachment of such disparate and largely non-load-bearing materials incurs weight penalties and encourages failures. Integrated preforms providing enhanced thermal management, improved shock resistance/integrity and thereby enable more efficient re-entry profiles. This project will ...

Three-dimensional woven and braided fiber architectures provide important advantages to composites, including suppression of delamination, high damage tolerance, improved through-the-thickness properties, simplicity and cost-effectiveness of manufacturing complex composite structural components. However, in order to diversify applications and reach high volumes of utilization of these materials in ...