You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Innovative Approaches to the Fabrication of Composite Rotary Wing Main Rotor Blade Spars with Option

    SBC: ACCUDYNE SYSTEMS, INC.            Topic: N08026

    Sponsored by NAVAIR, Accudyne Systems completed a Phase 1 SBIR program, developing an equipment and process concept for cost-effective fabrication of composite rotary wing main rotor blade spars. The CH-53K spar was the study focus. The recommended work cell concept combines automated tape placement, woven fabric placement, and pick and place of 45° parallelograms to layup plies, then debulk and ...

    SBIR Phase II 2010 Department of DefenseNavy
  2. Thermal Protective Coatings for Interceptor Missiles

    SBC: Adherent Technologies, Inc.            Topic: MDA09007

    This SBIR project will address the combined effects of aerothermal heating, rain erosion, and moisture and gas diffusion on the degradation of interceptor missile radomes designed for hypersonic travel. A novel method of protecting hypersonic interceptor missiles from the rigors experienced at velocities several times the speed of sound is proposed. The technology is based on the conversion of a ...

    SBIR Phase I 2010 Department of DefenseMissile Defense Agency
  3. Shipboard Waste Volume Reduction and Treatment

    SBC: Adherent Technologies, Inc.            Topic: N092153

    The US Navy is seeking ways to treat typical ship-generated waste to minimize storage space required for waste storage during long-term deployments, with a special emphasis on the large items produced during cargo and ordinance handling. The best way to do this is to treat the waste as a resource, reducing its volume and producing useful energy or fuel from the waste decomposition process. Rather ...

    SBIR Phase I 2010 Department of DefenseNavy
  4. A Novel Noninvasive Microwave Sensor for Quantitative Assessment of Degree of Sensitization in Marine Aluminum Alloys

    SBC: ALPHASENSE, INC.            Topic: N09T022

    In phase I, we have proven the feasibility of using the microwave cavity perturbation technique to detect and quantify DoS in marine aluminum alloys. We implemented an alpha version sensor prototype, characterized and validated its performance using ASTM G67 method. We also identified methods to further enhance the sensor sensitivity, so that DoS in the low (a few mg/cm2) to moderate range can be ...

    STTR Phase II 2010 Department of DefenseNavy
  5. A Novel Automated and Controlled Dual Laser Ablation System for Selective Removal of Thermal Barrier Coatings

    SBC: ALPHASENSE, INC.            Topic: AF093120

    Thermal barrier coatings have been widely used to provide thermal protection to superalloy components in gas turbine engines. After certain amount of service time, the coating experiences a reduction in thickness by processes such as wear, erosion and foreign/domestic object damage. When the thickness decreases below a critical value, the thermal barrier effect provided by the coating is no longer ...

    SBIR Phase I 2010 Department of DefenseAir Force
  6. A Compact, Low Cost, Handheld Sensor for Non- Destructive Material Case Depth Verification

    SBC: ALPHASENSE, INC.            Topic: N102141

    In this proposal, AlphaSense, Inc. and the Center for Non-destructive Evaluations at Iowa State University detail the development of a compact, low cost handheld sensor for non-destructive material case depth verification. The key innovations of this proposal include the following: a) case depth evaluations based on electromagnetic property measurements, b) a model based alternating current potent ...

    SBIR Phase I 2010 Department of DefenseNavy
  7. Compact, Low Cost, MEMS Hotplate Sensors for Battery Offgassing Analysis

    SBC: ALPHASENSE, INC.            Topic: N101056

    In this proposal, Alphasense Inc. and the Institute for MEMS and VLSI technologies at the George Washington University detail the development of compact, low cost MEMS microhotplate sensors for battery offgassing analysis. Key innovations of the proposed sensor include: a) the application of metal oxide coated microhotplates to ensure high sensitivity and stability, b) the application of a bi-laye ...

    SBIR Phase I 2010 Department of DefenseNavy
  8. A Handheld Sensor for Amorphous Coating Integrity Evaluation

    SBC: ALPHASENSE, INC.            Topic: SB093002

    Under the DARPA sponsored Naval Advanced Amorphous Coating (NAAC) program, a novel, thermal sprayed amorphous metal coating has been developed. Such a coating has demonstrated superior mechanical and corrosion resistance properties. Although the coating is designed to be life-of-ship, the application and operational conditions may compromise the integrity of the coating. For example, the applicati ...

    SBIR Phase I 2010 Department of DefenseDefense Advanced Research Projects Agency
  9. DIPAIN-Based Handheld Assay for the Detection of T-2 Toxin in Water Using a Handheld Reader

    SBC: ANP TECHNOLOGIES INC.            Topic: A10AT021

    A rapid assay for the detection of T2 trichothecene mycotoxin in water is proposed that will use ANP Technology, Inc.'s established handheld reader and rapid acetylcholinesterase (AChE) inhibitor test ticket format. Dipain-II and other candidate Dipain derivatives will be immobilized on cellulose and other solid supports mounted as discs in wells on the existing test ticket, similar to the AChE i ...

    STTR Phase I 2010 Department of DefenseArmy
  10. Space Qualified, Fast Steering Mirror (SQ_FSM)

    SBC: A-TECH CORPORATION            Topic: MDA08011

    Many steering mirrors have been developed over the years, but never has one been explicitly designed for high dose radiation environments or long-term space operations. As a result, deployed spaced based optical systems for line-of-sight stabilization or beam control have not benefited from the higher bandwidth control and better error rejection that can result from designs incorporating fast ste ...

    SBIR Phase II 2010 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government