You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Query-Based Interoperability for Simulation of Composite Structures

    SBC: INTACT SOLUTIONS, INC            Topic: 9020673R

    We propose to design and implement a query-based approach to interoperable modeling and simulation of composite material structures, that usually contain the manufacturing recipe within their design. In Phase I, we established the feasibility of the approach using a demonstration scenario of CAD/CAE interoperability for assemblies. In Phase II, we propose to develop a series of use-case scenarios ...

    SBIR Phase II 2013 Department of CommerceNational Institute of Standards and Technology
  2. Improved Microcalorimeter Detectors for X-ray Chemical Shift Mapping

    SBC: STAR CRYOELECTRONICS, LLC            Topic: 9020868TT

    X-ray fluorescence spectroscopy is a widely used and extremely sensitive analytical technique for qualitative and quantitative chemical analysis. Superconducting Transition Edge Sensor (TES) microcalorimeter detectors have now been developed that achieve an energy resolution of 2 eV for 1.5 keV X-rays, which is sufficient to enable the measurement of the small shift of the X-ray line position that ...

    SBIR Phase II 2013 Department of CommerceNational Institute of Standards and Technology
  3. Three-Dimensional Test Materials for Solid Supports

    SBC: Prime Synthesis            Topic: 9021168R

    Since 1990, Prime Synthesis, Inc. (PSI) has been a leading manufacturer of controlled pore glass (CPG). It has developed significant expertise in the optimization of physical characteristics and chemical modifications of CPG for a variety of applications. CPG has a unique combination of attributes including a very uniform, three-dimensional, nanopore structure that is dimensionally stable in organ ...

    SBIR Phase I 2013 Department of CommerceNational Institute of Standards and Technology
  4. Dynamic Frequency Passive Millimeter-Wave Radiometer Based on Optical Up-Conversion

    SBC: PHASE SENSITIVE INNOVATIONS INC            Topic: 941D

    In the proposed effort, we will leverage this extensive experience and capabilities to realize a frequency agile mmW radiometer that can cover the range of DC-110 GHz and can be scaled to DC-200 GHz under Phase II. Ours is a photonic system that multiplies and up-coverts a low-frequency reference signal onto an optical carrier (laser) using EO modulation, then uses the modulation sidebands to inj ...

    SBIR Phase I 2013 Department of CommerceNational Oceanic and Atmospheric Administration
  5. Development of Manufacturing Technology for the Practical Application of Specialized and Environmentally Sensitive Nutrients, Enzymes, Immune-Stimulating Compounds and Biologics to Aquafeeds

    SBC: Zeigler Bros, Inc.            Topic: 823F

    In an effort to support the development of a domestic marine aquaculture industry, Zeigler Bros. Inc., (ZBI) proposes to continue its Phase I research by demonstrating the ability to scale up inclusion particle (IP) manufacturing. During Phase II ZBI will also demonstrate the efficacy of IOs for orally delivering phytase and probiotics to marine finfish. These efforts will directly address the p ...

    SBIR Phase II 2013 Department of CommerceNational Oceanic and Atmospheric Administration
  6. Anion Exchange Resin for Chirality-based Separation of Single-wall Carbon Nanotubes

    SBC: Sepax Technologies, Inc.            Topic: N/A

    Sepax Technologies, Inc. has identified a new type of anoin-exchange resin which separates single-wall carbon nanotubes (SWCNTs) with >80% recovery yield and resolves in a single pass the chiral tubes of (6,5) well from commercial SWCNT starting materials by Chromatography. Improvement and scale up of the targeted resin production will facilitate the separation of chiral nanotubes for the academic ...

    SBIR Phase II 2012 Department of CommerceNational Institute of Standards and Technology
  7. Improved Microcalorimeter Detectors for X-Ray Chemical Shift Mapping

    SBC: STAR CRYOELECTRONICS, LLC            Topic: N/A

    X-ray fluorescence spectroscopy is a widely used and extremely sensitive analytical technique for qualitative as well as quantitative chemical analysis. Superconducting Transition Edge Sensor (TES) microcalorimeter detectors have now been developed that achieve an energy resolution of 2 eV (full width at half maximum) for 1.5 keV X-rays, which is sufficient to enable the measurement of the small s ...

    SBIR Phase I 2012 Department of CommerceNational Institute of Standards and Technology
  8. Query- Based Interoperability and CAD/CAE Integration in Assemblies

    SBC: INTACT SOLUTIONS, INC            Topic: N/A

    We propose to design and implement a set of CAD queries by which to achieve model interchangeability in assemblies, model interoperability, and model integration for CAD/CAE. A model scenario will be used to illustrate how this can be accomplished. In Phase 1, we will establish the feasibility of the approach, develop high level algorithms and conduct software experiments to verify their efficienc ...

    SBIR Phase I 2012 Department of CommerceNational Institute of Standards and Technology
  9. Low Visibility Decoy Flare

    SBC: GENERAL SCIENCES INC            Topic: SOCOM09002

    Low visibility rotary aircraft decoys are needed to protect vehicles against heat seeking missile attacks without illuminating the target which exposes the aircraft to small arms fire and potentially compromising the mission. The novel approach to this challenge is to produce a decoy which emits only in the bands of interest utilizing techniques such as containment and composition selection to op ...

    SBIR Phase II 2012 Department of DefenseSpecial Operations Command
  10. Development of MicroFluidic Palette for Cellular Responses to Chemical Stimuli

    SBC: Bellbrook Labs, LLC            Topic: N/A

    Current research tools to understand tumor cell migration and metastases are limited to linear gradients or constant flow across cells skewing results. Researchers at the National Institute of Standards and Technology developed a tool called the microfluidic palette which exposes cells to chemical stimuli in a static environment overcoming the limitations above. Several improvements are necessary ...

    SBIR Phase I 2010 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government