You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Advanced Long-Range Video Capabilities Using Speckle Imaging Techniques

    SBC: EM PHOTONICS INC            Topic: A402

    Flight-testing is a crucial component in NASA's mission to research and develop new aeronautical concepts because it allows for verification of simulated and wind-tunnel experiments and exposes previously unforeseen design problems. Video is an invaluable tool for flight-testing, allowing the collection of a wealth of information such as craft position, speed, health, as well as tracking diff ...

    SBIR Phase II 2013 National Aeronautics and Space Administration
  2. ISS Additive Manufacturing Facility for On-Demand Fabrication in Space

    SBC: Made In Space, Inc.            Topic: O302

    Made in Space has completed a preliminary design review of the Additive Manufacturing Facility. During the first half of Phase 1, the design went through conceptual development, simulation testing, cost analysis, and comparison testing of which off-the-shelf parts can be used. The deliverables for Phase I include a written report detailing evidence of demonstrated technology (TRL 5) in the laborat ...

    SBIR Phase II 2013 National Aeronautics and Space Administration
  3. Dynamic Frequency Passive Millimeter-Wave Radiometer Based on Optical Up-Conversion

    SBC: PHASE SENSITIVE INNOVATIONS INC            Topic: 941D

    In the proposed effort, we will leverage this extensive experience and capabilities to realize a frequency agile mmW radiometer that can cover the range of DC-110 GHz and can be scaled to DC-200 GHz under Phase II. Ours is a photonic system that multiplies and up-coverts a low-frequency reference signal onto an optical carrier (laser) using EO modulation, then uses the modulation sidebands to inj ...

    SBIR Phase I 2013 Department of CommerceNational Oceanic and Atmospheric Administration
  4. Generating Autoclave-Level Mechanical Properties with Out-of-Autoclave Thermoplastic Placement of Large Composite Aerospace Structures

    SBC: ACCUDYNE SYSTEMS, INC.            Topic: T702

    While in the 1970's and 1980's, composites were adopted for aerospace structure for increased performance and weight savings, the 1990's and 2000's witnessed the attention towards cost-effective fabrication. All thermoset processes that utilize such machines rely on autoclaves to consolidate the laminates, at significant acquisition and operational expense. Autoclaves to consolidate wings are hu ...

    STTR Phase II 2009 National Aeronautics and Space Administration
  5. A High Reliability Frequency Stabilized Semiconductor Laser Source

    SBC: Princeton Optronics            Topic: S101

    NASA needs high stability laser source of 1W output power for Lidar applications. Princeton Optronics has developed ultra-stable, narrow linewidth diode pumped solid state lasers using stable packaging and high performance locker. We have also developed high power Vertical Cavity Surface Emitting Laser (VCSEL) semiconductor laser sources. We propose to develop a high reliability master oscillator ...

    SBIR Phase I 2009 National Aeronautics and Space Administration
  6. Miniature, Rugged, Pulsed Laser Source for LIDAR Application

    SBC: Princeton Optronics            Topic: S101

    Princeton Optronics proposes to develop a high energy pulsed laser source based on a novel approach. The approach consists of a technique to combine a large number of diode pumped solid state lasers. The resulting laser can be packaged in a very small package. We will develop the laser and package it into a laser welded package which can be space qualified. We can achieve 50mJ or higher level of e ...

    SBIR Phase I 2009 National Aeronautics and Space Administration
  7. Novel Photonic RF Spectrometer

    SBC: SPECTRUM MAGNETICS LLC            Topic: S104

    Leveraging on recent breakthroughs in broadband photonic devices and components for RF and microwave applications, SML proposes a new type of broadband microwave spectrometer with performance and affordability that were not attainable before. The photonic microwave spectrometer overcomes the constrains associated with microwave electronics, linearly and simultaneously offering 6-18 GHz (potential ...

    SBIR Phase I 2009 National Aeronautics and Space Administration
  8. Heated Thermoplastic Fiber Placement Head for NASA Langley Research Center

    SBC: ACCUDYNE SYSTEMS, INC.            Topic: A404

    Reduced mass composite materials are crucial to the success of aerospace systems, but are inhibited by expensive autoclave consolidation, especially for large parts. To remedy this, NASA-LaRC has been developing cost-effective high-performance thermoplastic composite materials for years. NASA materials could dramatically reduce the cost of large aerospace structures, because those materials avo ...

    SBIR Phase I 2004 National Aeronautics and Space Administration
  9. Monolithic Approach to Oxide Dispersion Strengthened Aluminum

    SBC: Nassau Stern Company            Topic: N/A

    Nassau Stern Company is investigating an approach for manufacturing oxide dispersion strengthened (ODS) aluminum in bulk rather than powder form. The approach combines novel ceramic injection molding technology to produce preforms for subsequent pressure infiltration casting with aluminum. The preforms contain between 30 and 40 volume percent sub-micron aluminum oxide and 60 to 70 volume percent n ...

    SBIR Phase I 2004 National Aeronautics and Space Administration
  10. Fabrication and Test of HTS Coils for the VASIMR Experiment

    SBC: TAI-YANG RESEARCH COMPANY            Topic: H703

    In the Phase I effort, Tai-Yang Research Corporation (TYRC) proposes to design and perform analyses on state-of-the-art High Temperature Superconducting (HTS) coils for the Variable Specific Impulse Magneto-Plasma Rocket (VASIMR) experiment being conducted at the Advanced Space Propulsion Laboratory (ASPL) at the NASA Johnson Space Center. Using the design results obtained in the Phase I effort, T ...

    SBIR Phase II 2004 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government