You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Helmet-Mounted Thermal Sensor for First Responder Burn-Saver Device
SBC: TDA RESEARCH, INC. Topic: HSB0131003The personal protective equipment (PPE) worn by firefighters (turnout Gear, SCBA, helmet, etc.) protects the wearer against burns and hazardous environments. Unfortunately, they work so well that they decrease the firefighter's situational awareness, in particular their ability to notice rapidly increasing temperatures. Although current thermal sensor technologies (generally built in to the Pers ...
SBIR Phase I 2013 Department of Homeland Security -
GPS JLOC Sensor Suite for Critical Infrastructure
SBC: THE NAVSYS CORPORATION Topic: HSB0131004Timing and position data from civil GPS receivers have become integral to the operation of many of the Nation's critical infrastructures. Through the Patriot Watch architecture, DHS is coordinating efforts to identify, locate, and attribute domestic GPS interference, maintain a central database for reports of domestic and international interference to civil use of GPS and its augmentations, and n ...
SBIR Phase I 2013 Department of Homeland Security -
Refractory Coating for Heat Resistant Portable Helipad
SBC: ELTRON RESEARCH & DEVELOPMENT, INCORPORATED Topic: N122109Eltron Research & Development, Inc (Eltron) has developed a refractory, flexible, inorganic paint that has shown excellent performance in protecting polymers from direct heat sources. In this project, Eltron will coat portable helipad mat materials such as polyethylene and polyester as well as other high temperature polymers and lightweight materials with refractory paint. Eltron"s refractory, cer ...
SBIR Phase I 2013 Department of DefenseNavy -
A Miniaturized SERS Based Sensor Technology for detecting toxic contaminants in oxygen from aircraft On-Board Oxygen Generating Systems (OBOGS)
SBC: SPORIAN MICROSYSTEMS, INC Topic: N122120Aircraft equipped with On-Board Oxygen Generating Systems (OBOGS) selectively filter nitrogen and other gaseous contaminants in air from the aircraft's engine to provide the aircrew with an oxygen enriched breathing gas. Under suboptimal operating conditions, toxic byproducts can breach the OBOGS and enter the aircrew's oxygen supply. Current contaminant sensor technologies tend to lack ...
SBIR Phase I 2013 Department of DefenseNavy -
High Efficiency SIGINT Collection
SBC: NUMERICA CORPORATION Topic: N122121U.S. intelligence, reconnaissance, and surveillance (ISR) platforms employ SIGINT sensors for target platform detection, identification and location. Many receivers are narrowband and are scanned over the RF spectrum (e.g., 2-18 GHz) in search of RF emitters of interest. With the rapid proliferation of RF technology, the signal spectrum has become complex and congested placing a burden on the SIGI ...
SBIR Phase I 2013 Department of DefenseNavy -
Interactive Generative Manifold Learning
SBC: NUMERICA CORPORATION Topic: N122138Nonlinear manifold learning is an active area of mathematical research. Unfortunately, the extant literature has far less to offer on the problem of interactive nonlinear manifold learning. In other words, satisfactory nonlinear manifold learning approaches that put the''human in the loop'are yet to be fully developed. Human steering of such calculations promises several advantages ...
SBIR Phase I 2013 Department of DefenseNavy -
Efficient, Cost-Effective, Low-Emissions Method to Cutting Nuclear Submarine and Aircraft Carrier Hulls
SBC: Native American Technologies Company Topic: N123157Develop a new steel cutting process which will significantly increase the cutting rate of ship hull material for shipbreaking. In addition, the process will reduce the fume and smoke emissions to within Navy and civilian requirements and the opacity of particulate emissions to within Navy and civilian requirements.
SBIR Phase I 2013 Department of DefenseNavy -
High Energy and Power Density ALD-Enabled Devices
SBC: ADA TECHNOLOGIES, INC. Topic: N131020Envisioned Navy applications ranging from shore-based microgrids to directed energy weapons pose energy storage performance, cost, and scalability requirements that far exceed the capabilities of today"s technologies. Electric double-layer capacitors (EDLC) can meet most power demands ($/kW and kW/L) but cannot be used where high energy density is also required. As such, there is a need for a new ...
SBIR Phase I 2013 Department of DefenseNavy -
Wireless Torque Sensor for Condition Based Maintenance
SBC: Albido Corporation Topic: N11AT030In recent years, the need for highly reliable, durable and non-intrusive systems for monitoring the health condition of naval structures becomes more and more recognized. Of particular importance is the condition based maintenance of Navy rotating machinery (motors, generators, pumps, gear systems, etc.). Such Structural Health Monitoring (SHM) systems should be able to detect failures in their ea ...
STTR Phase II 2013 Department of DefenseNavy -
Flowing Water Optical Power Meter for Laser Measurements
SBC: High Precision Devices, Inc. Topic: N/AHigh Precision Devices, Inc. (HPD) proposes to use the Phase I SBIR as a vehicle to develop and market a commercially viable 25kW flowing water optical power meter (FWOPM) for industrial, research, and government applications. Building upon existing and fundamentally sound NIST design, and without sacrificing quality or accuracy, HPD will reduce costs and increase manufacturability using best prac ...
SBIR Phase I 2013 Department of CommerceNational Institute of Standards and Technology