You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Microfabrication and Micromaching

    SBC: Atometric, Inc.            Topic: N/A

    During Phase 1 Atometric developed and demonstrated principles of a four-axis micro machine. This machine is capable of machining metal parts that are sized within 50mm cube to an accuracy within one micron. Our goal is to develop a micro machine that is applicable to a broad commercial market. Three additional features need to be added to make the machine fully commercially viable. These three fe ...

    SBIR Phase II 2005 Department of CommerceNational Institute of Standards and Technology
  2. A Novel Electrokinetics-Driven, Integrated Microfluidic Cartridge for Sample Preparation from Complex Matrices

    SBC: CFD RESEARCH CORPORATION            Topic: HSB051001

    Sample preparation has been recognized as the single most important challenge to be faced in the development of detect-to-warn (DTW) systems (NRC, 2005). Available commercial sample preparation technologies are expensive, slow (30 min to 2 hours) and require trained laboratory technicians for operation. Addressing this need, we propose to design, fabricate, and demonstrate a novel integrated micro ...

    SBIR Phase I 2005 Department of Homeland Security
  3. Design and Realization of a Dual Function OCM/MPM for Imaging TEMPS

    SBC: DISTANT FOCUS CORP            Topic: N/A

    Regenerative medicine is an emerging, interdisciplinary field that will result in new engineered medical products. The introduction of a high-resolution, non-destructive imaging technique that is capable of penetrating deeply into the highly-scattering scaffold medium has the means to accelerate the development and commercial utilization of these novel materials. Multi-photon microscopy (MPM) is b ...

    SBIR Phase I 2005 Department of CommerceNational Institute of Standards and Technology
  4. Handheld Biological Detection System

    SBC: EPIR TECHNOLOGIES INC            Topic: HSB052001

    Colloidal suspensions of quantum dots (QD) offer a novel, inexpensive means of biological-warfare-agent (BWA) detection using compact lightweight systems that may be deployed in a variety of ways, including handheld biosensors. We propose here to design, fabricate and test portable, lightweight, user-friendly, low-logistical-load biosensors capable of automated and rapid BWA detection with high se ...

    SBIR Phase I 2005 Department of Homeland Security
  5. A passive, multistatic, satellite based radar for maritime vessel detection and tracking

    SBC: Intellectual Properties, Inc.            Topic: HSB052003

    The largest border in the United States is not the boundary between the US and Canada or the US and Mexico, but the coastlines. Maintaining security of our territorial waters is essential in the face of an increasingly hostile world. Current maritime security strategy rests on four pillars; awareness, prevention, protection, and, response. Of these, awareness is arguably the most important; howeve ...

    SBIR Phase I 2005 Department of Homeland Security
  6. Miniature Quickscan Receiver

    SBC: OCEANIT LABORATORIES INC            Topic: SOCOM04004

    SOF tactical users lack a miniature threat warning receiver that permits them to monitor RF energy and exploit hostile wireless communications while on extended deployments that necessitate very low power budgets. Having this capability will save lives and enhance the probability of successful completion of dangerous missions. The purpose of this Small Business Innovative Research (SBIR) Phase II ...

    SBIR Phase II 2005 Department of DefenseSpecial Operations Command
  7. Vertical Wind Profile Data Collection Using Laser Technology on Unmanned Delivery Platforms.

    SBC: OCEANIT LABORATORIES INC            Topic: SOCOM04007

    The current project aims to demonstrate the feasibility of a compact, powerful, power-efficient lidar unit for wind profiling on board UAV's and other aircraft. The system leverages Oceanit's current development efforts building an eye-safe lidar for minute aerosol detection. A unique design provides a rugged system with no moving parts and little maintenance requirements. Efforts will include ...

    SBIR Phase I 2005 Department of DefenseSpecial Operations Command
  8. Alternative Power Sources

    SBC: SmartSpark            Topic: SOCOM04008

    This project will develop fully functional prototypes of a battery-free portable power source that can be deployed in remote, unattended locations. The power source will provide up to five watt-hours per day under extreme weather conditions for a minimum of four years without maintenance. The design relies on solar energy, and uses ultracapacitors for energy storage. A modular interconnect ...

    SBIR Phase II 2005 Department of DefenseSpecial Operations Command
  9. Microfabrication and Micromaching- correct DUN# 142425888

    SBC: Atometric, Inc.            Topic: N/A

    Biotechnology, aerospace, automotive and communications industries need small ultra-precise, three dimensional parts for component miniaturization. Present metal cutting technology is rapidly reaching its limits. A new technology is required to accelerate this trend. Atometric will pursue innovations in ultra-precision multi-axis machine tools. The machining capacity will be within a cube of 50 mm ...

    SBIR Phase I 2004 Department of CommerceNational Institute of Standards and Technology
  10. A Novel, Low Power, High Throughput, High Efficiency, Scalable Electrostatic Bioaerosol Sampler

    SBC: CFD RESEARCH CORPORATION            Topic: HSB041003

    Current bioaerosol monitoring strategies rely on inertia-based sampling and suffer from high power consumption and low efficiency limitations. In contrast, our overall objective is to design and demonstrate a novel electrostatic sampler that provides dramatic improvements including low power requirement (90% for 1-10mm), high viability (>80%), scalability for varying threat scenarios, low noise, a ...

    SBIR Phase I 2004 Department of Homeland Security
US Flag An Official Website of the United States Government