Award Data

The DoD Chemical, Biological, Radiological, and Nuclear Defense Program Performance Plan discusses the status of sensing technologies and long-term goals, and shows point biological detection systems are expected to provide 20% of the objective capabilities in FY15. This indicates that there is the need for a man-portable, disposable, rapidly responding biological agent point detector that is cap ...

Oceanit proposes to develop a reliable, low-cost, easy-to-install, self-monitoring, and self-expanding wireless communication system to enable remote monitoring and tracking of sensors on emergency first responders in hostile environments. The heart of the system will use a Zigbee wireless mesh networking IC for low power and low cost communications. By using a wireless mesh network, low power wir ...

There is an acute need for a networked chemical sensor that is inexpensive enough to allow it to be treated as a disposable item - deployed and left in-place until the end of its useful life, or until operations move out of communications range. Electrochemical microarray sensors can be fabricated at low enough unit cost to make the development of a disposable sensor node feasible. These sensors ...

Sample preparation has been recognized as the single most important challenge to be faced in the development of detect-to-warn (DTW) systems (NRC, 2005). Available commercial sample preparation technologies are expensive, slow (30 min to 2 hours) and require trained laboratory technicians for operation. Addressing this need, we propose to design, fabricate, demonstrate, and validate a novel integr ...

Current bioaerosol monitoring and evaluation systems are largely based on collection of airborne pathogens in a liquid medium, followed by the detection of the targets of interest. While available aerosol collection technologies employ large collection volumes, biosensors are capable of processing only a small fraction of the collection volume. Our overall objective is to design and demonstrate a ...

Our solution to the automated feature extraction problem will leverage the material properties that can be inferred from combining multispectral imagery with high resolution elevation data or LIDAR data using a trainable knowledge base. Multiple imaging bands provide a more complete picture of the material involved than ordinary RGB. This can help distinguish between a green grass lawn and a gre ...

The current project will develop and demonstrate a prototype compact, power-efficient all-fiber lidar unit for wind profiling on board UAV's and other aircraft. The system leverages Oceanit's current fiber-laser based lidar development efforts. A unique design provides a rugged system with no moving parts and little maintenance requirements. Efforts in the current project will include prototype s ...

High quantum efficiency (QE), fast (

Current bioaerosol monitoring strategies rely on inertia-based sampling and suffer from high power consumption and low efficiency limitations. In contrast, our overall objective is to design and demonstrate a novel electrostatic sampler that provides dramatic improvements including low power requirement (90% for 1-10mm), high viability (>80%), scalability for varying threat scenarios, low noise, a ...

Special Operation Forces personnel require a rugged, miniature receiver that is capable of monitoring RF energy while deployed on a mission. The RF receiver will give a better picture of the electromagnetic threat environment enabling a heightened situational awareness, yet the device must be small enough that it does not hamper the SOF warfighter during missions requiring stealth and rapid mobil ...